/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef PCI_DEF_H #define PCI_DEF_H /* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: */ #define PCI_VENDOR_ID 0x00 /* 16 bits */ #define PCI_DEVICE_ID 0x02 /* 16 bits */ #define PCI_COMMAND 0x04 /* 16 bits */ #define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ #define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ #define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ #define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ #define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ #define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ #define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ #define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ #define PCI_COMMAND_SERR 0x100 /* Enable SERR */ #define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ #define PCI_COMMAND_INT_DISABLE 0x400 /* Interrupt disable */ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ /* Support User Definable Features [obsolete] */ #define PCI_STATUS_UDF 0x40 #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ #define PCI_STATUS_PARITY 0x100 /* Detected parity error */ #define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ #define PCI_STATUS_DEVSEL_FAST 0x000 #define PCI_STATUS_DEVSEL_MEDIUM 0x200 #define PCI_STATUS_DEVSEL_SLOW 0x400 #define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ #define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ #define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ #define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ #define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ #define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ #define PCI_REVISION_ID 0x08 /* Revision ID */ #define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ #define PCI_CLASS_DEVICE 0x0a /* Device class */ #define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ #define PCI_LATENCY_TIMER 0x0d /* 8 bits */ #define PCI_HEADER_TYPE 0x0e /* 8 bits */ #define PCI_HEADER_TYPE_NORMAL 0 #define PCI_HEADER_TYPE_BRIDGE 1 #define PCI_HEADER_TYPE_CARDBUS 2 #define PCI_BIST 0x0f /* 8 bits */ #define PCI_BIST_CODE_MASK 0x0f /* Return result */ #define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ #define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ /* * Base addresses specify locations in memory or I/O space. * Decoded size can be determined by writing a value of * 0xffffffff to the register, and reading it back. Only * 1 bits are decoded. */ #define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ #define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ #define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ #define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ #define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ #define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ #define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ #define PCI_BASE_ADDRESS_SPACE_IO 0x01 #define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 #define PCI_BASE_ADDRESS_MEM_LIMIT_MASK 0x06 #define PCI_BASE_ADDRESS_MEM_LIMIT_32 0x00 /* 32 bit address */ #define PCI_BASE_ADDRESS_MEM_LIMIT_1M 0x02 /* Below 1M [obsolete] */ #define PCI_BASE_ADDRESS_MEM_LIMIT_64 0x04 /* 64 bit address */ #define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ #define PCI_BASE_ADDRESS_MEM_ATTR_MASK 0x0f #define PCI_BASE_ADDRESS_IO_ATTR_MASK 0x03 /* bit 1 is reserved if address_space = 1 */ /* Header type 0 (normal devices) */ #define PCI_CARDBUS_CIS 0x28 #define PCI_SUBSYSTEM_VENDOR_ID 0x2c #define PCI_SUBSYSTEM_ID 0x2e /* Bits 31..11 are address, 10..1 reserved */ #define PCI_ROM_ADDRESS 0x30 #define PCI_ROM_ADDRESS_ENABLE 0x01 #define PCI_ROM_ADDRESS_MASK (~0x7ffUL) /* Offset of first capability list entry */ #define PCI_CAPABILITY_LIST 0x34 /* 0x35-0x3b are reserved */ #define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ #define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ #define PCI_MIN_GNT 0x3e /* 8 bits */ #define PCI_MAX_LAT 0x3f /* 8 bits */ /* Header type 1 (PCI-to-PCI bridges) */ #define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ #define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ /* Highest bus number behind the bridge */ #define PCI_SUBORDINATE_BUS 0x1a /* Latency timer for secondary interface */ #define PCI_SEC_LATENCY_TIMER 0x1b #define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ #define PCI_IO_LIMIT 0x1d #define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */ #define PCI_IO_RANGE_TYPE_16 0x00 #define PCI_IO_RANGE_TYPE_32 0x01 #define PCI_IO_RANGE_MASK ~0x0f /* Secondary status register, only bit 14 used */ #define PCI_SEC_STATUS 0x1e #define PCI_MEMORY_BASE 0x20 /* Memory range behind */ #define PCI_MEMORY_LIMIT 0x22 #define PCI_MEMORY_RANGE_TYPE_MASK 0x0f #define PCI_MEMORY_RANGE_MASK ~0x0f #define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ #define PCI_PREF_MEMORY_LIMIT 0x26 #define PCI_PREF_RANGE_TYPE_MASK 0x0f #define PCI_PREF_RANGE_TYPE_32 0x00 #define PCI_PREF_RANGE_TYPE_64 0x01 #define PCI_PREF_RANGE_MASK ~0x0f /* Upper half of prefetchable memory range */ #define PCI_PREF_BASE_UPPER32 0x28 #define PCI_PREF_LIMIT_UPPER32 0x2c #define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ #define PCI_IO_LIMIT_UPPER16 0x32 /* 0x34 same as for htype 0 */ /* 0x35-0x3b is reserved */ /* Same as PCI_ROM_ADDRESS, but for htype 1 */ #define PCI_ROM_ADDRESS1 0x38 /* 0x3c-0x3d are same as for htype 0 */ #define PCI_BRIDGE_CONTROL 0x3e /* Enable parity detection on secondary interface */ #define PCI_BRIDGE_CTL_PARITY 0x01 #define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ #define PCI_BRIDGE_CTL_ISA 0x04 /* Disable bridging of ISA ports */ #define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ #define PCI_BRIDGE_CTL_VGA16 0x10 /* Enable 16-bit i/o port decoding */ #define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ #define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ /* Fast Back2Back enabled on secondary interface */ #define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Header type 2 (CardBus bridges) */ #define PCI_CB_CAPABILITY_LIST 0x14 /* 0x15 reserved */ #define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ #define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ #define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ #define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ #define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ #define PCI_CB_MEMORY_BASE_0 0x1c #define PCI_CB_MEMORY_LIMIT_0 0x20 #define PCI_CB_MEMORY_BASE_1 0x24 #define PCI_CB_MEMORY_LIMIT_1 0x28 #define PCI_CB_IO_BASE_0 0x2c #define PCI_CB_IO_BASE_0_HI 0x2e #define PCI_CB_IO_LIMIT_0 0x30 #define PCI_CB_IO_LIMIT_0_HI 0x32 #define PCI_CB_IO_BASE_1 0x34 #define PCI_CB_IO_BASE_1_HI 0x36 #define PCI_CB_IO_LIMIT_1 0x38 #define PCI_CB_IO_LIMIT_1_HI 0x3a #define PCI_CB_IO_RANGE_MASK ~0x03 /* 0x3c-0x3d are same as for htype 0 */ #define PCI_CB_BRIDGE_CONTROL 0x3e /* Similar to standard bridge control register */ #define PCI_CB_BRIDGE_CTL_PARITY 0x01 #define PCI_CB_BRIDGE_CTL_SERR 0x02 #define PCI_CB_BRIDGE_CTL_ISA 0x04 #define PCI_CB_BRIDGE_CTL_VGA 0x08 #define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 #define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ /* Enable interrupt for 16-bit cards */ #define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Prefetch enable for both memory regions */ #define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 #define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 #define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 #define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 #define PCI_CB_SUBSYSTEM_ID 0x42 /* 16-bit PC Card legacy mode base address (ExCa) */ #define PCI_CB_LEGACY_MODE_BASE 0x44 /* 0x48-0x7f reserved */ /* Capability lists */ #define PCI_CAP_LIST_ID 0 /* Capability ID */ #define PCI_CAP_ID_PM 0x01 /* Power Management */ #define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ #define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ #define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ #define PCI_CAP_ID_MSI 0x05 /* Message Signaled Interrupts */ #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ #define PCI_CAP_ID_PCIX 0x07 /* PCIX */ #define PCI_CAP_ID_HT 0x08 /* Hypertransport */ #define PCI_CAP_ID_EHCI_DEBUG 0x0A /* EHCI debug port */ #define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ #define PCI_CAP_ID_PCIE 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ /* Hypertransport Registers */ #define PCI_HT_CAP_SIZEOF 4 #define PCI_HT_CAP_HOST_CTRL 4 /* Host link control */ #define PCI_HT_CAP_HOST_WIDTH 6 /* width value & capability */ #define PCI_HT_CAP_HOST_FREQ 0x09 /* Host frequency */ #define PCI_HT_CAP_HOST_FREQ_CAP 0x0a /* Host Frequency capability */ #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ #define PCI_HT_CAP_SLAVE_WIDTH0 6 /* width value & capability */ #define PCI_HT_CAP_SLAVE_WIDTH1 0x0a /* width value & capability to */ #define PCI_HT_CAP_SLAVE_FREQ0 0x0d /* Slave frequency from */ #define PCI_HT_CAP_SLAVE_FREQ1 0x011 /* Slave frequency to */ #define PCI_HT_CAP_SLAVE_FREQ_CAP0 0x0e /* Frequency capability from */ #define PCI_HT_CAP_SLAVE_FREQ_CAP1 0x12 /* Frequency capability to */ #define PCI_HT_CAP_SLAVE_LINK_ENUM 0x14 /* Link Enumeration Scratchpad */ /* Power Management Registers */ #define PCI_PM_PMC 2 /* PM Capabilities Register */ #define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ #define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxiliary power support */ #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ #define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ #define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ #define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_POWER_STATE_D0 0x0 #define PCI_PM_CTRL_POWER_STATE_D1 0x1 #define PCI_PM_CTRL_POWER_STATE_D2 0x2 #define PCI_PM_CTRL_POWER_STATE_D3HOT 0x3 #define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ #define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ #define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ #define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ #define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ #define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ /* Bus power/clock control enable (??) */ #define PCI_PM_BPCC_ENABLE 0x80 #define PCI_PM_DATA_REGISTER 7 /* (??) */ #define PCI_PM_SIZEOF 8 /* AGP registers */ #define PCI_AGP_VERSION 2 /* BCD version number */ #define PCI_AGP_RFU 3 /* Rest of capability flags */ #define PCI_AGP_STATUS 4 /* Status register */ /* Maximum number of requests - 1 */ #define PCI_AGP_STATUS_RQ_MASK 0xff000000 #define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ #define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ #define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ #define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ #define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ #define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ #define PCI_AGP_COMMAND 8 /* Control register */ /* Master: Maximum number of requests */ #define PCI_AGP_COMMAND_RQ_MASK 0xff000000 #define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ /* Allow processing of AGP transactions */ #define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of 64-bit addresses */ #define PCI_AGP_COMMAND_64BIT 0x0020 #define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ #define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ #define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 4x rate */ #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */ #define PCI_AGP_SIZEOF 12 /* Slot Identification */ #define PCI_SID_ESR 2 /* Expansion Slot Register */ /* Number of expansion slots available */ #define PCI_SID_ESR_NSLOTS 0x1f #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ /* Message Signaled Interrupts registers */ #define PCI_MSI_FLAGS 2 /* Various flags */ #define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ #define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ #define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ #define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ #define PCI_MSI_RFU 3 /* Rest of capability flags */ #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ #define PCI_MSI_ADDRESS_HI 8 #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ #define PCI_MSI_MASK_BIT 16 /* Mask bits register */ /* MSI-X registers */ #define PCI_MSIX_FLAGS 2 #define PCI_MSIX_FLAGS_QSIZE 0x7FF /* table size */ #define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */ #define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X enable */ #define PCI_MSIX_TABLE 4 /* Table offset */ #define PCI_MSIX_PBA 8 /* Pending Bit Array offset */ #define PCI_MSIX_PBA_BIR 0x7 /* BAR index */ #define PCI_MSIX_PBA_OFFSET ~0x7 /* Offset into specified BAR */ #define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ /* CompactPCI Hotswap Register */ #define PCI_CHSWP_CSR 2 /* Control and Status Register */ #define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ #define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ #define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ #define PCI_CHSWP_LOO 0x08 /* LED On / Off */ #define PCI_CHSWP_PI 0x30 /* Programming Interface */ #define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ #define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ /* PCI-X registers */ #define PCI_X_CMD 2 /* Modes & Features */ #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ #define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ #define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ #define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ #define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ #define PCI_X_STATUS 4 /* PCI-X capabilities */ #define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ #define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ #define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ #define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ #define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ /* Unexpected Split Completion */ #define PCI_X_STATUS_UNX_SPL 0x00080000 #define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ /* Designed Max Memory Read Count */ #define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Cumulative Read Size */ #define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Rcvd Split Completion Error Msg */ #define PCI_X_STATUS_SPL_ERR 0x20000000 #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ /* PCI-X bridge registers */ #define PCI_X_SEC_STATUS 2 /* Secondary status */ /* The bus behind the bridge is 64bits wide */ #define PCI_X_SSTATUS_64BIT 0x0001 /* The bus behind the bridge is 133Mhz Capable */ #define PCI_X_SSTATUS_133MHZ 0x0002 #define PCI_X_SSTATUS_SPL_DISC 0x0004 /* Split Completion Discarded */ #define PCI_X_SSTATUS_UNX_SPL 0x0008 /* Unexpected Split Completion */ #define PCI_X_SSTATUS_SPL_OVR 0x0010 /* Split Completion Overrun */ #define PCI_X_SSTATUS_SPL_DLY 0x0020 /* Split Completion Delayed */ /* PCI-X mode and frequency */ #define PCI_X_SSTATUS_MFREQ(x) (((x) & 0x03c0) >> 6) #define PCI_X_SSTATUS_CONVENTIONAL_PCI 0x0 #define PCI_X_SSTATUS_MODE1_66MHZ 0x1 #define PCI_X_SSTATUS_MODE1_100MHZ 0x2 #define PCI_X_SSTATUS_MODE1_133MHZ 0x3 #define PCI_X_SSTATUS_MODE2_266MHZ_REF_66MHZ 0x9 #define PCI_X_SSTATUS_MODE2_266MHZ_REF_100MHZ 0xa #define PCI_X_SSTATUS_MODE2_266MHZ_REF_133MHZ 0xb #define PCI_X_SSTATUS_MODE2_533MHZ_REF_66MHZ 0xd #define PCI_X_SSTATUS_MODE2_533MHZ_REF_100MHZ 0xe #define PCI_X_SSTATUS_MODE2_533MHZ_REF_133MHZ 0xf #define PCI_X_SSTATUS_VERSION(x) (((x) >> 12) & 3) /* Version */ /* The bus behind the bridge is 266Mhz Capable */ #define PCI_X_SSTATUS_266MHZ 0x4000 /* The bus behind the bridge is 533Mhz Capable */ #define PCI_X_SSTAUTS_533MHZ 0x8000 /* PCI Express capability registers */ #define PCI_EXP_FLAGS 2 /* Capabilities register */ #define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ #define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ #define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ #define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ #define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ #define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ #define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ #define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ #define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ #define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ #define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ #define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ #define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ #define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ #define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ #define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ #define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ #define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ #define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ #define PCI_EXP_DEVCTL 8 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ #define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ #define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ #define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ #define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ #define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ #define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ #define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ #define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ #define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ #define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ #define PCI_EXP_DEVSTA 10 /* Device Status */ #define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ #define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ #define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ #define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ #define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_MLS 0x000f /* Maximum Link Speed */ #define PCI_EXP_LNKCAP_MLW 0x03f0 /* Maximum Link Width */ #define PCI_EXP_LNKCAP_ASPMS 0xc00 /* ASPM Support */ #define PCI_EXP_LNKCAP_L0SEL 0x7000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x38000 /* L1 Exit Latency */ #define PCI_EXP_CLK_PM 0x40000 /* Clock Power Management */ #define PCI_EXP_LNKCAP_PORT 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_RL 0x20 /* Retrain Link */ #define PCI_EXP_LNKCTL_CCC 0x40 /* Common Clock COnfiguration */ #define PCI_EXP_EN_CLK_PM 0x100 /* Enable Clock Power Management */ #define PCI_EXP_LNKSTA 18 /* Link Status */ #define PCI_EXP_LNKSTA_LT 0x800 /* Link Training */ #define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_HPC 0x0040 /* Hot-Plug Capable */ #define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ #define PCI_EXP_SLTCTL 24 /* Slot Control */ #define PCI_EXP_SLTSTA 26 /* Slot Status */ #define PCI_EXP_RTCTL 28 /* Root Control */ #define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ #define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ #define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ #define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ #define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTSTA 32 /* Root Status */ #define PCI_EXP_DEVCAP2 36 /* Device capabilities 2 */ #define PCI_EXP_DEVCAP2_LTR 0x0800 /* LTR supported */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEV2_LTR 0x0400 /* LTR enabled */ /* Extended Capabilities (PCI-X 2.0 and Express) */ #define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) #define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) #define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) #define PCI_EXT_CAP_ID_ERR 1 #define PCI_EXT_CAP_ID_VC 2 #define PCI_EXT_CAP_ID_DSN 3 #define PCI_EXT_CAP_ID_PWR 4 #define PCI_EXT_CAP_ID_VNDR 0x0b /* Extended Capability lists*/ #define PCIE_EXT_CAP_OFFSET 0x100 #define PCIE_EXT_CAP_AER_ID 0x0001 #define PCIE_EXT_CAP_ID_ATS 0x000F #define PCIE_EXT_CAP_L1SS_ID 0x001E #define PCIE_EXT_CAP_LTR_ID 0x0018 #define PCIE_EXT_CAP_RESIZABLE_BAR 0x0015 #define PCIE_EXT_CAP_RCECEA_ID 0x0007 /* Secondary PCI Express Extended Capability Structure */ #define PCI_EXP_SEC_CAP_ID 0x19 #define PCI_EXP_SEC_LNK_CTL3 4 /* Link Control 3 */ #define PCI_EXP_SEC_LANE_ERR_STATUS 8 /* Lane Error Status */ /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ #define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ #define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ #define PCI_ERR_SURPRISE_DN 0x00000020 /* Surprise Down */ #define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ #define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ #define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ #define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ #define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ #define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ #define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ #define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ #define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ #define PCI_ERR_UNC_INTL_ERR 0x00400000 /* Uncorrectable Internal Error */ #define PCI_ERR_UNC_POISON_BLK 0x04000000 /* Poisoned TLP Egress Blocked */ #define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ /* Same bits as above */ #define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ /* Same bits as above */ #define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ #define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ #define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ #define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ #define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ #define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ #define PCI_ERR_COR_ANF 0x00002000 /* Advisory Non-Fatal Error */ #define PCI_ERR_COR_INTL_ERR 0x00004000 /* Corrected Internal Error */ #define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow Error */ #define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ /* Same bits as above */ #define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ #define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ #define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ #define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ #define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ #define PCI_EXP_ROOT_CERE 0x0001 /* Correctable Error Reporting Enable */ #define PCI_EXP_ROOT_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ #define PCI_EXP_ROOT_FERE 0x0004 /* Fatal Error Reporting Enable */ #define PCI_ERR_ROOT_STATUS 48 #define PCI_ERR_ROOT_COR_SRC 52 #define PCI_ERR_ROOT_SRC 54 /* DPC Capability Structure */ #define PCIE_DPC_CAP_ID 0x1d #define PCIE_DPC_CTL 0x6 #define DPC_TRIGGER_EN (1 << 1) #define DPC_INT_EN (1 << 3) #define DPC_ERR_COR_EN (1 << 4) #define DPC_POISON_TLP (1 << 5) #define PCIE_DPC_RP_PIO_MASK 0x10 #define PCIE_DPC_SEV 0x14 /* Virtual Channel */ #define PCI_VC_PORT_REG1 4 #define PCI_VC_PORT_REG2 8 #define PCI_VC_PORT_CTRL 12 #define PCI_VC_PORT_STATUS 14 #define PCI_VC_RES_CAP 16 #define PCI_VC_RES_CTRL 20 #define PCI_VC_RES_STATUS 26 /* Power Budgeting */ #define PCI_PWR_DSR 4 /* Data Select Register */ #define PCI_PWR_DATA 8 /* Data Register */ #define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ #define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ #define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ #define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ #define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ #define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ #define PCI_PWR_CAP 12 /* Capability */ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ /* Latency Tolerance Reporting */ #define PCI_LTR_MAX_SNOOP 4 #define PCI_LTR_MAX_NOSNOOP 6 /* PCIe Resizable BARs */ #define PCI_REBAR_CAP_OFFSET 0x4 #define PCI_REBAR_CAP_SIZE_MASK 0xfffffff0 #define PCI_REBAR_CTRL_OFFSET 0x8 #define PCI_REBAR_CTRL_NBARS_MASK 0xe0 #define PCI_REBAR_CTRL_NBARS_SHIFT 5 #define PCI_REBAR_CTRL_IDX_MASK 0x07 #define PCI_REBAR_CTRL_SIZE_MASK 0xffff0000 #define PCI_REBAR_CTRL_SIZE_SHIFT 16 /* Root Complex Event Collector Endpoint Association */ #define PCI_RCECEA_BITMAP 4 #define PCI_RCECEA_BUSNUM 8 /* * The PCI interface treats multi-function devices as independent * devices. The slot/function address of each device is encoded * in a single byte as follows: * * 7:3 = slot * 2:0 = function */ #define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) #define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) #define PCI_FUNC(devfn) ((devfn) & 0x07) /* Translation from PCI_DEV() to devicetree bus and path.pci.devfn. */ #define PCI_DEV2DEVFN(sdev) (((sdev)>>12) & 0xff) #define PCI_DEV2SEGBUS(sdev) (((sdev)>>20) & 0xfff) #endif /* PCI_DEF_H */