/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __DEVICE_MMIO_H__ #define __DEVICE_MMIO_H__ #include #include #include #include #define __clrsetbits_impl(bits, addr, clear, set) write##bits(addr, \ (read##bits(addr) & ~((uint##bits##_t)(clear))) | (set)) #define clrsetbits8(addr, clear, set) __clrsetbits_impl(8, addr, clear, set) #define clrsetbits16(addr, clear, set) __clrsetbits_impl(16, addr, clear, set) #define clrsetbits32(addr, clear, set) __clrsetbits_impl(32, addr, clear, set) #define clrsetbits64(addr, clear, set) __clrsetbits_impl(64, addr, clear, set) #define setbits8(addr, set) clrsetbits8(addr, 0, set) #define setbits16(addr, set) clrsetbits16(addr, 0, set) #define setbits32(addr, set) clrsetbits32(addr, 0, set) #define setbits64(addr, set) clrsetbits64(addr, 0, set) #define clrbits8(addr, clear) clrsetbits8(addr, clear, 0) #define clrbits16(addr, clear) clrsetbits16(addr, clear, 0) #define clrbits32(addr, clear) clrsetbits32(addr, clear, 0) #define clrbits64(addr, clear) clrsetbits64(addr, clear, 0) #define clrsetbits8p(addr, clear, set) clrsetbits8((void *)((uintptr_t)addr), clear, set) #define clrsetbits16p(addr, clear, set) clrsetbits16((void *)((uintptr_t)addr), clear, set) #define clrsetbits32p(addr, clear, set) clrsetbits32((void *)((uintptr_t)addr), clear, set) #define clrsetbits64p(addr, clear, set) clrsetbits64((void *)((uintptr_t)addr), clear, set) #define setbits8p(addr, set) clrsetbits8((void *)((uintptr_t)addr), 0, set) #define setbits16p(addr, set) clrsetbits16((void *)((uintptr_t)addr), 0, set) #define setbits32p(addr, set) clrsetbits32((void *)((uintptr_t)addr), 0, set) #define setbits64p(addr, set) clrsetbits64((void *)((uintptr_t)addr), 0, set) #define clrbits8p(addr, clear) clrsetbits8((void *)((uintptr_t)addr), clear, 0) #define clrbits16p(addr, clear) clrsetbits16((void *)((uintptr_t)addr), clear, 0) #define clrbits32p(addr, clear) clrsetbits32((void *)((uintptr_t)addr), clear, 0) #define clrbits64p(addr, clear) clrsetbits64((void *)((uintptr_t)addr), clear, 0) /* * Reads a transfer buffer from 32-bit FIFO registers. fifo_stride is the * distance in bytes between registers (e.g. pass 4 for a normal array of 32-bit * registers or 0 to read everything from the same register). fifo_width is * the amount of bytes read per register (can be 1 through 4). */ void buffer_from_fifo32(void *buffer, size_t size, void *fifo, int fifo_stride, int fifo_width); /* * Version of buffer_to_fifo32() that can prepend a prefix of up to fifo_width * size to the transfer. This is often useful for protocols where a command word * precedes the actual payload data. The prefix must be packed in the low-order * bytes of the 'prefix' u32 parameter and any high-order bytes exceeding prefsz * must be 0. Note that 'size' counts total bytes written, including 'prefsz'. */ void buffer_to_fifo32_prefix(const void *buffer, u32 prefix, int prefsz, size_t size, void *fifo, int fifo_stride, int fifo_width); /* * Writes a transfer buffer into 32-bit FIFO registers. fifo_stride is the * distance in bytes between registers (e.g. pass 4 for a normal array of 32-bit * registers or 0 to write everything into the same register). fifo_width is * the amount of bytes written per register (can be 1 through 4). */ static inline void buffer_to_fifo32(const void *buffer, size_t size, void *fifo, int fifo_stride, int fifo_width) { buffer_to_fifo32_prefix(buffer, 0, 0, size, fifo, fifo_stride, fifo_width); } /* * Utilities to help processing bit fields. * * To define a bit field (usually inside a register), do: * * DEFINE_BITFIELD(name, high_bit, low_bit) * * - name: Name of the field to access. * - high_bit: highest bit that's part of the bit field. * - low_bit: lowest bit in the bit field. * * To define a field with a single bit: * * DEFINE_BIT(name, bit) * * To extract one field value from a raw reg value: * * EXTRACT_BITFIELD(value, name); * * To read from an MMIO register and extract one field from it: * * READ32_BITFIELD(®, name); * * To write into an MMIO register, set given fields (by names) to specified * values, and all other bits to zero (usually used for resetting a register): * * WRITE32_BITFIELDS(®, name, value, [name, value, ...]) * * To write into an MMIO register, set given fields (by names) to specified * values, and leaving all others "unchanged" (usually used for updating some * settings): * * SET32_BITFIELDS(®, name, value, [name, value, ...]) * * Examples: * * DEFINE_BITFIELD(DISP_TYPE, 2, 1) * DEFINE_BIT(DISP_EN, 0) * * SET32_BITFIELDS(&disp_regs.ctrl, DISP_TYPE, 2); * SET32_BITFIELDS(&disp_regs.ctrl, DISP_EN, 0); * * SET32_BITFIELDS(&disp_regs.ctrl, DISP_TYPE, 1, DISP_EN, 1); * WRITE32_BITFIELDS(&disp_regs.ctrl, DISP_TYPE, 1, DISP_EN, 1); * * READ32_BITFIELD(®, DISP_TYPE) * EXTRACT_BITFIELD(value, DISP_TYPE) * * These will be translated to: * * clrsetbits32(&disp_regs.ctrl, 0x6, 0x4); * clrsetbits32(&disp_regs.ctrl, 0x1, 0x0); * * clrsetbits32(&disp_regs.ctrl, 0x7, 0x3); * write32(&disp_regs.ctrl, 0x3); * * (read32(®) & 0x6) >> 1 * (value & 0x6) >> 1 * * The {WRITE,SET}32_BITFIELDS currently only allows setting up to 8 fields at * one invocation. */ #define DEFINE_BITFIELD(name, high_bit, low_bit) \ _Static_assert(high_bit >= low_bit, "invalid bit field range"); \ enum { \ name##_BITFIELD_SHIFT = (low_bit), \ name##_BITFIELD_SIZE = (high_bit) - (low_bit) + 1, \ }; #define DEFINE_BIT(name, bit) DEFINE_BITFIELD(name, bit, bit) #define _BF_MASK(name, value) \ ((u32)GENMASK(name##_BITFIELD_SHIFT + name##_BITFIELD_SIZE - 1, \ name##_BITFIELD_SHIFT)) #define _BF_VALUE(name, value) \ (((u32)(value) << name##_BITFIELD_SHIFT) & _BF_MASK(name, 0)) #define _BF_APPLY1(op, name, value, ...) (op(name, value)) #define _BF_APPLY2(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY1(op, __VA_ARGS__)) #define _BF_APPLY3(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY2(op, __VA_ARGS__)) #define _BF_APPLY4(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY3(op, __VA_ARGS__)) #define _BF_APPLY5(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY4(op, __VA_ARGS__)) #define _BF_APPLY6(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY5(op, __VA_ARGS__)) #define _BF_APPLY7(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY6(op, __VA_ARGS__)) #define _BF_APPLY8(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY7(op, __VA_ARGS__)) #define _BF_APPLY9(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY8(op, __VA_ARGS__)) #define _BF_APPLY10(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY9(op, __VA_ARGS__)) #define _BF_APPLY11(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY10(op, __VA_ARGS__)) #define _BF_APPLY12(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY11(op, __VA_ARGS__)) #define _BF_APPLY13(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY12(op, __VA_ARGS__)) #define _BF_APPLY14(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY13(op, __VA_ARGS__)) #define _BF_APPLY15(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY14(op, __VA_ARGS__)) #define _BF_APPLY16(op, name, value, ...) ((op(name, value)) | \ _BF_APPLY15(op, __VA_ARGS__)) #define _BF_APPLYINVALID(...) \ _Static_assert(0, "Invalid arguments for {WRITE,SET}*_BITFIELDS") #define _BF_IMPL2(op, addr, \ n1, v1, n2, v2, n3, v3, n4, v4, n5, v5, n6, v6, n7, v7, n8, v8, \ n9, v9, n10, v10, n11, v11, n12, v12, n13, v13, n14, v14, n15, v15, n16, v16, \ NARGS, ...) \ \ op(addr, \ _BF_APPLY##NARGS(_BF_MASK, n1, v1, n2, v2, n3, v3, n4, v4, \ n5, v5, n6, v6, n7, v7, n8, v8, \ n9, v9, n10, v10, n11, v11, n12, v12, \ n13, v13, n14, v14, n15, v15, n16, v16), \ _BF_APPLY##NARGS(_BF_VALUE, n1, v1, n2, v2, n3, v3, n4, v4, \ n5, v5, n6, v6, n7, v7, n8, v8,\ n9, v9, n10, v10, n11, v11, n12, v12, \ n13, v13, n14, v14, n15, v15, n16, v16)) #define _BF_IMPL(op, addr, ...) \ _BF_IMPL2(op, addr, __VA_ARGS__, \ 16, INVALID, 15, INVALID, 14, INVALID, 13, INVALID, \ 12, INVALID, 11, INVALID, 10, INVALID, 9, INVALID, \ 8, INVALID, 7, INVALID, 6, INVALID, 5, INVALID, \ 4, INVALID, 3, INVALID, 2, INVALID, 1, INVALID) #define _WRITE32_BITFIELDS_IMPL(addr, masks, values) write32(addr, values) #define WRITE32_BITFIELDS(addr, ...) \ _BF_IMPL(_WRITE32_BITFIELDS_IMPL, addr, __VA_ARGS__) #define SET32_BITFIELDS(addr, ...) \ _BF_IMPL(clrsetbits32, addr, __VA_ARGS__) #define EXTRACT_BITFIELD(value, name) \ (((value) & _BF_MASK(name, 0)) >> name##_BITFIELD_SHIFT) #define READ32_BITFIELD(addr, name) \ EXTRACT_BITFIELD(read32(addr), name) static __always_inline uint8_t read8p(const uintptr_t addr) { return read8((void *)addr); } static __always_inline uint16_t read16p(const uintptr_t addr) { return read16((void *)addr); } static __always_inline uint32_t read32p(const uintptr_t addr) { return read32((void *)addr); } static __always_inline uint64_t read64p(const uintptr_t addr) { return read64((void *)addr); } static __always_inline void write8p(const uintptr_t addr, const uint8_t value) { write8((void *)addr, value); } static __always_inline void write16p(const uintptr_t addr, const uint16_t value) { write16((void *)addr, value); } static __always_inline void write32p(const uintptr_t addr, const uint32_t value) { write32((void *)addr, value); } static __always_inline void write64p(const uintptr_t addr, const uint64_t value) { write64((void *)addr, value); } #endif /* __DEVICE_MMIO_H__ */