/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * JEDEC Standard No. 21-C * Annex J: Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3) */ #ifndef DEVICE_DRAM_DDR2L_H #define DEVICE_DRAM_DDR2L_H /** * @file ddr2.h * * \brief Utilities for decoding DDR2 SPDs */ #include #include #include /** Maximum SPD size supported */ #define SPD_SIZE_MAX_DDR2 128 /* Byte 20 [5:0]: DDR2 Module type information */ enum spd_dimm_type_ddr2 { SPD_DDR2_DIMM_TYPE_UNDEFINED = 0x00, SPD_DDR2_DIMM_TYPE_RDIMM = 0x01, SPD_DDR2_DIMM_TYPE_UDIMM = 0x02, SPD_DDR2_DIMM_TYPE_SO_DIMM = 0x04, SPD_DDR2_DIMM_TYPE_72B_SO_CDIMM = 0x06, SPD_DDR2_DIMM_TYPE_72B_SO_RDIMM = 0x07, SPD_DDR2_DIMM_TYPE_MICRO_DIMM = 0x08, SPD_DDR2_DIMM_TYPE_MINI_RDIMM = 0x10, SPD_DDR2_DIMM_TYPE_MINI_UDIMM = 0x20, /* Masks to bits 5:0 to give the dimm type */ SPD_DDR2_DIMM_TYPE_MASK = 0x3f, }; /** * \brief DIMM flags * * Characteristic flags for the DIMM, as presented by the SPD */ union dimm_flags_ddr2_st { /* The whole point of the union/struct construct is to allow us to clear * all the bits with one line: flags.raw = 0. * We do not care how these bits are ordered */ struct { /* Module can work at 5.00V */ unsigned int operable_5_00V:1; /* Module can work at 3.33V */ unsigned int operable_3_33V:1; /* Module can work at 2.50V */ unsigned int operable_2_50V:1; /* Module can work at 1.80V - All DIMMS must be 1.8V operable */ unsigned int operable_1_80V:1; /* Module can work at 1.50V */ unsigned int operable_1_50V:1; /* Module can work at 1.35V */ unsigned int operable_1_35V:1; /* Module can work at 1.20V */ unsigned int operable_1_25V:1; /* Has an 8-bit bus extension, meaning the DIMM supports ECC */ unsigned int is_ecc:1; /* Supports weak driver */ unsigned int weak_driver:1; /* Supports terminating at 50 Ohm */ unsigned int terminate_50ohms:1; /* Partial Array Self Refresh */ unsigned int pasr:1; /* Supports burst length 8 */ unsigned int bl8:1; /* Supports burst length 4 */ unsigned int bl4:1; /* DIMM Package is stack */ unsigned int stacked:1; /* the assembly supports self refresh */ unsigned int self_refresh:1; }; unsigned int raw; }; /** * \brief DIMM characteristics * * The characteristics of each DIMM, as presented by the SPD */ struct dimm_attr_ddr2_st { enum spd_memory_type dram_type; enum spd_dimm_type_ddr2 dimm_type; /* BCD SPD revision */ u8 rev; /* Supported CAS mask, bit 0 == CL0 .. bit7 == CL7 */ u8 cas_supported; /* Maximum cloclk to data cycle times for various CAS. * Fields 0 and 1 are unused. */ u32 cycle_time[8]; /* Maximum data access times for various CAS. * Fields 0 and 1 are unused. */ u32 access_time[8]; /* Flags extracted from SPD */ union dimm_flags_ddr2_st flags; /* Number of banks */ u8 banks; /* SDRAM width */ u8 width; /* Module width */ u8 mod_width; /* Number of ranks */ u8 ranks; /* Number or row address bits */ u8 row_bits; /* Number or column address bits */ u8 col_bits; /* Number of PLLs on module */ u8 plls; /* Size of module in MiB */ u16 size_mb; /* Size of one rank in MiB */ u16 ranksize_mb; /* Latencies are in units of 1/256 ns */ u32 tCK; u32 tWR; u32 tRCD; u32 tRRD; u32 tRP; u32 tRAS; u32 tIS; u32 tIH; u32 tDS; u32 tDH; u32 tRC; u32 tRFC; u32 tWTR; u32 tRTP; u32 tDQSQ; u32 tQHS; /* Latencies are in units of 1/256 us */ u32 tPLL; u32 tRR; u8 checksum; /* Manufacturer ID */ u32 manufacturer_id; /* ASCII part number - NULL terminated */ u8 part_number[17]; /* Year manufactured */ u16 year; /* Week manufactured */ u8 weeks; /* Unique serial number */ u32 serial; }; int spd_dimm_is_registered_ddr2(enum spd_dimm_type_ddr2 type); u8 spd_ddr2_calc_checksum(u8 *spd, int len); u32 spd_decode_spd_size_ddr2(u8 byte0); u32 spd_decode_eeprom_size_ddr2(u8 byte1); int spd_decode_ddr2(struct dimm_attr_ddr2_st *dimm, u8 spd[SPD_SIZE_MAX_DDR2]); void dram_print_spd_ddr2(const struct dimm_attr_ddr2_st *dimm); void normalize_tck(u32 *tclk); u8 spd_get_msbs(u8 c); u16 spd_ddr2_calc_unique_crc(const u8 *spd, int len); #endif /* DEVICE_DRAM_DDR2L_H */