/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef ACPI_ACPIGEN_DPTF_H #define ACPI_ACPIGEN_DPTF_H #include #include #include /* A common idiom is to use a default value if none is provided (i.e., == 0) */ #define DEFAULT_IF_0(thing, default_) ((thing) ? (thing) : (default_)) /* Hardcoded paths */ #define DPTF_DEVICE_PATH "\\_SB.DPTF" #define TCPU_SCOPE "\\_SB.PCI0" /* List of available participants (i.e., they can participate in policies) */ enum dptf_participant { DPTF_NONE, DPTF_CPU, DPTF_CHARGER, DPTF_FAN, DPTF_TEMP_SENSOR_0, DPTF_TEMP_SENSOR_1, DPTF_TEMP_SENSOR_2, DPTF_TEMP_SENSOR_3, DPTF_TPCH, DPTF_PARTICIPANT_COUNT, }; /* DPTF compile-time constants */ enum { /* A device can only define _AC0 .. _AC9 i.e. between 0 and 10 Active Cooling Methods */ DPTF_MAX_ACX = 10, DPTF_MAX_ACTIVE_POLICIES = (DPTF_PARTICIPANT_COUNT-1), DPTF_MAX_PASSIVE_POLICIES = (DPTF_PARTICIPANT_COUNT-1), DPTF_MAX_CRITICAL_POLICIES = (DPTF_PARTICIPANT_COUNT-1), /* Maximum found by automatic inspection (awk) */ DPTF_MAX_CHARGER_PERF_STATES = 10, DPTF_MAX_FAN_PERF_STATES = 10, /* From ACPI spec 6.3 */ DPTF_FIELD_UNUSED = 0xFFFFFFFFull, /* Max supported by DPTF */ DPTF_MAX_TSR = 4, }; /* Active Policy */ struct dptf_active_policy { /* Device capable of being affected by the fan */ enum dptf_participant target; /* Source's contribution to the Target's cooling capability as a percentage */ uint8_t weight; /* When target reaches temperature 'temp', the source will turn on at 'fan_pct' % */ struct { /* (degrees C) */ uint8_t temp; /* 0 - 100 */ uint8_t fan_pct; } thresholds[DPTF_MAX_ACX]; }; /* Passive Policy */ struct dptf_passive_policy { /* The device that can be throttled */ enum dptf_participant source; /* The device that controls the throttling */ enum dptf_participant target; /* How often to check the temperature for required throttling (ms) */ uint16_t period; /* The trip point for turning on throttling (degrees C) */ uint8_t temp; /* Relative priority between Policies */ uint8_t priority; }; /* Critical Policy type: graceful S4 transition or graceful shutdown */ enum dptf_critical_policy_type { DPTF_CRITICAL_S4, DPTF_CRITICAL_SHUTDOWN, }; /* Critical Policy */ struct dptf_critical_policy { /* The device that can trigger a critical event */ enum dptf_participant source; /* What type of critical policy */ enum dptf_critical_policy_type type; /* Temperature to activate policy, degrees C */ uint8_t temp; }; /* Different levels of charging capability, chosen by passive policies */ struct dptf_charger_perf { /* Control value */ uint8_t control; /* Charging performance, in mA */ uint16_t raw_perf; }; /* Different levels of fan activity, chosen by active policies */ struct dptf_fan_perf { /* Fan percentage level */ uint8_t percent; /* Fan speed, in RPM */ uint16_t speed; /* Noise level, in 0.1 dBs */ uint16_t noise_level; /* Power in mA */ uint16_t power; }; /* Running Average Power Limits (RAPL) */ struct dptf_power_limit_config { /* Minimum level of power limit, in mW */ uint32_t min_power; /* Maximum level of power limit, in mW */ uint32_t max_power; /* Minimum time window running average is over, in seconds */ uint32_t time_window_min; /* Maximum time window running average is over, in seconds */ uint32_t time_window_max; /* Granularity of the power limit setting (between min and max), in mW */ uint16_t granularity; }; /* Only PL1 and PL2 are controllable via DPTF */ struct dptf_power_limits { struct dptf_power_limit_config pl1; struct dptf_power_limit_config pl2; }; /* * This function writes out \_SB.DPTF.IDSP, which describes the different DPTF policies that * this implementation is using. */ void dptf_write_enabled_policies(const struct dptf_active_policy *active_policies, int active_count, const struct dptf_passive_policy *passive_policies, int passive_count, const struct dptf_critical_policy *critical_policies, int critical_count); /* * This function provides tables of temperature and corresponding fan or percent. When the * temperature thresholds are met (_AC0 - _AC9), the fan is driven to corresponding percentage * of full speed. */ void dptf_write_active_policies(const struct dptf_active_policy *policies, int max_count); /* * This function uses the definition of the passive policies to write out _PSV Methods on all * participants that define it. It also writes out the Thermal Relationship Table * (\_SB.DPTF._TRT), which describes various passive (i.e., throttling) policies that can be * applies when temperature sensors reach the _PSV threshold. */ void dptf_write_passive_policies(const struct dptf_passive_policy *policies, int max_count); /* * Critical policies are temperature thresholds that, when reached, will cause the system to * take some emergency action in order to eliminate excess temperatures from damaging the * system. The emergency actions are a graceful suspend or a graceful shutdown. */ void dptf_write_critical_policies(const struct dptf_critical_policy *policies, int max_count); /* * These are various performance levels for battery charging. They can be used in conjunction * with passive policies to lower the charging rate when the _PSV threshold is met. */ void dptf_write_charger_perf(const struct dptf_charger_perf *perf, int max_count); /* * This function writes an ACPI table describing various performance levels possible for active * policies. They indicate, for a given fan percentage level: * 1) What the corresponding speed is (in RPM) * 2) The expected noise level (in tenths of decibels AKA centibels, or DPTF_FIELD_UNUSED) * 3) The power consumption (in mW, or DPTF_FIELD_UNUSED to indicate this field is unused). * 4) The corresponding active cooling trip point (from _ART) (typically left as * DPTF_FIELD_UNUSED). */ void dptf_write_fan_perf(const struct dptf_fan_perf *perf, int max_count); /* * This function writes out a PPCC table, which indicates power ranges that different Intel * Running Average Power Limits (RAPLs) can take, as well as the time period they average over * and the minimum adjustment amount. */ void dptf_write_power_limits(const struct dptf_power_limits *limits); /* Set the _STR Name */ void dptf_write_STR(const char *str); /* Set options in the _FIF table */ void dptf_write_fan_options(bool fine_grained, int step_size, bool low_speed_notify); /* * Sets the amount of inherent hysteresis in temperature sensor readings (either from hardware * circuitry or possibly from the EC's firmware implementation. */ void dptf_write_tsr_hysteresis(uint8_t hysteresis); /* Helper method to open the scope for a given participant. */ void dptf_write_scope(enum dptf_participant participant); /* * Write out a _STA that will check the value of the DPTE field in GNVS, and return 0xF if DPTE * is 1, otherwise it will return 0. */ void dptf_write_STA(void); #endif /* ACPI_ACPIGEN_DPTF_H */