/* SPDX-License-Identifier: GPL-2.0-only */ Method (RPTS, 1, Serialized) { If ((Arg0 == 0x04) || (Arg0 == 0x05)) { /* Store current EC settings in CMOS */ Switch (ToInteger (\_SB.PCI0.LPCB.EC.ECRD (RefOf (\_SB.PCI0.LPCB.EC.TPLE)))) { // 0x00 == Enabled == 0x00 // 0x11 == Re-enabled == 0x00 // 0x22 == Disabled == 0x01 Case (0x00) { \_SB.PCI0.LPCB.TPLC = 0x00 } Case (0x11) { \_SB.PCI0.LPCB.TPLC = 0x00 } Case (0x22) { \_SB.PCI0.LPCB.TPLC = 0x01 } } \_SB.PCI0.LPCB.FLKC = \_SB.PCI0.LPCB.EC.ECRD (RefOf (\_SB.PCI0.LPCB.EC.FLKE)) Switch (ToInteger (\_SB.PCI0.LPCB.EC.ECRD (RefOf (\_SB.PCI0.LPCB.EC.KLSE)))) { // 0x00 == Disabled == 0x00 // 0xdd == Enabled == 0x01 Case (0x00) { \_SB.PCI0.LPCB.KLSC = 0x00 } Case (0xdd) { \_SB.PCI0.LPCB.KLSC = 0x01 } } Switch (ToInteger (\_SB.PCI0.LPCB.EC.ECRD (RefOf (\_SB.PCI0.LPCB.EC.KLBE)))) { // 0xdd == On == 0x00 // 0xcc == Off == 0x01 // 0xbb == Low == 0x02 // 0xaa == High == 0x03 Case (0xdd) { \_SB.PCI0.LPCB.KLBC = 0x00 } Case (0xcc) { \_SB.PCI0.LPCB.KLBC = 0x01 } Case (0xbb) { \_SB.PCI0.LPCB.KLBC = 0x02 } Case (0xaa) { \_SB.PCI0.LPCB.KLBC = 0x03 } } } /* * Disable ACPI support. * This should always be the last action before entering S4 or S5. */ \_SB.PCI0.LPCB.EC.OSFG = 0x00 } Method (RWAK, 1, Serialized) { /* * Enable ACPI support. * This should always be the first action when exiting S4 or S5. */ \_SB.PCI0.LPCB.EC.OSFG = 0x01 /* Restore EC settings from CMOS */ Switch (ToInteger (\_SB.PCI0.LPCB.TPLC)) { // 0x00 == Enabled == 0x00 // 0x00 == Re-enabled == 0x11 // 0x01 == Disabled == 0x22 Case (0x00) { \_SB.PCI0.LPCB.EC.ECWR (0x00, RefOf(\_SB.PCI0.LPCB.EC.TPLE)) } Case (0x01) { \_SB.PCI0.LPCB.EC.ECWR (0x22, RefOf(\_SB.PCI0.LPCB.EC.TPLE)) } } \_SB.PCI0.LPCB.EC.ECWR (\_SB.PCI0.LPCB.FLKC, RefOf(\_SB.PCI0.LPCB.EC.FLKE)) Switch (ToInteger (\_SB.PCI0.LPCB.KLSC)) { // 0x00 == Disabled == 0x00 // 0x01 == Enabled == 0xdd Case (0x00) { \_SB.PCI0.LPCB.EC.ECWR (0x00, RefOf(\_SB.PCI0.LPCB.EC.KLSE)) } Case (0x01) { \_SB.PCI0.LPCB.EC.ECWR (0xdd, RefOf(\_SB.PCI0.LPCB.EC.KLSE)) } } Switch (ToInteger (\_SB.PCI0.LPCB.KLBC)) { // 0x00 == On == 0xdd // 0x01 == Off == 0xcc // 0x02 == Low == 0xbb // 0x03 == High == 0xaa Case (0x00) { \_SB.PCI0.LPCB.EC.ECWR (0xdd, RefOf(\_SB.PCI0.LPCB.EC.KLBE)) } Case (0x01) { \_SB.PCI0.LPCB.EC.ECWR (0xcc, RefOf(\_SB.PCI0.LPCB.EC.KLBE)) } Case (0x02) { \_SB.PCI0.LPCB.EC.ECWR (0xbb, RefOf(\_SB.PCI0.LPCB.EC.KLBE)) } Case (0x03) { \_SB.PCI0.LPCB.EC.ECWR (0xaa, RefOf(\_SB.PCI0.LPCB.EC.KLBE)) } } }