# Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code.
config HAVE_USBDEBUG
	bool
	default y if HAVE_USBDEBUG_OPTIONS
	default n

# Use "select HAVE_USBDEBUG_OPTIONS" on southbridges with multiple
# EHCI controllers or multiple ports with Debug Port capability
config HAVE_USBDEBUG_OPTIONS
	def_bool n

config USBDEBUG
	bool "USB 2.0 EHCI debug dongle support"
	default n
	depends on HAVE_USBDEBUG
	help
	  This option allows you to use a so-called USB EHCI Debug device
	  (such as the Ajays NET20DC, AMIDebug RX, or a system using the
	  Linux "EHCI Debug Device gadget" driver found in recent kernel)
	  to retrieve the coreboot debug messages (instead, or in addition
	  to, a serial port).

	  This feature is NOT supported on all chipsets in coreboot!

	  It also requires a USB2 controller which supports the EHCI
	  Debug Port capability.

	  See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list
	  of supported controllers.

	  If unsure, say N.

if USBDEBUG

config USBDEBUG_IN_ROMSTAGE
	bool "Enable early (pre-RAM) usbdebug"
	default y
	depends on EARLY_CBMEM_INIT
	help
	   Configuring USB controllers in system-agent binary may cause
	   problems to usbdebug. Disabling this option delays usbdebug to
	   be setup on entry to ramstage.

	   If unsure, say Y.

config USBDEBUG_HCD_INDEX
	int
	default 0
	prompt "Index for EHCI controller to use with usbdebug" if HAVE_USBDEBUG_OPTIONS
	help
	   Some boards have multiple EHCI controllers with possibly only
	   one having the Debug Port capability on an external USB port.

	   Mapping of this index to PCI device functions is southbridge
	   specific and mainboard level Kconfig should already provide
	   a working default value here.

config USBDEBUG_DEFAULT_PORT
	int
	default 0
	prompt "Default USB port to use as Debug Port" if HAVE_USBDEBUG_OPTIONS
	help
	  Selects which physical USB port usbdebug dongle is connected to.
	  Setting of 0 means to scan possible ports starting from 1.

	  Intel platforms have hardwired the debug port location and this
	  setting makes no difference there.

	  Hence, if you select the correct port here, you can speed up
	  your boot time. Which USB port number refers to which actual
	  port on your mainboard (potentially also USB pin headers on
	  your mainboard) is highly board-specific, and you'll likely
	  have to find out by trial-and-error.

choice
	prompt "Type of dongle"
	default USBDEBUG_DONGLE_STD

config USBDEBUG_DONGLE_STD
	bool "Net20DC or compatible"

config USBDEBUG_DONGLE_BEAGLEBONE
	bool "BeagleBone"
	help
	  Use this to configure the USB hub on BeagleBone board.

config USBDEBUG_DONGLE_BEAGLEBONE_BLACK
	bool "BeagleBone Black"
	help
	  Use this with BeagleBone Black.

endchoice

config USBDEBUG_OPTIONAL_HUB_PORT
	int
	default 2 if USBDEBUG_DONGLE_BEAGLEBONE
	default 0

endif # USBDEBUG