/* SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #define CR50_DID_VID 0x00281ae0L #define TI50_DT_DID_VID 0x504a6666L #define TI50_OT_DID_VID 0x50666666L #define CR50_BOARD_CFG_LOCKBIT_MASK 0x80000000U #define CR50_BOARD_CFG_FEATUREBITS_MASK 0x3FFFFFFFU #define CR50_BOARD_CFG_100US_READY_PULSE 0x00000001U #define CR50_BOARD_CFG_VALUE \ (CONFIG(CR50_USE_LONG_INTERRUPT_PULSES) \ ? CR50_BOARD_CFG_100US_READY_PULSE : 0) #define CR50_TIMEOUT_NOIRQ_MS 20 /* Timeout for TPM ready without IRQ */ enum cr50_register { CR50_FW_VER_REG, CR50_BOARD_CFG_REG, }; #define CR50_FW_VER_REG_SPI (TPM_LOCALITY_0_SPI_BASE + 0xf90) #define CR50_BOARD_CFG_REG_SPI (TPM_LOCALITY_0_SPI_BASE + 0xfe0) #define CR50_FW_VER_REG_I2C 0x0f #define CR50_BOARD_CFG_REG_I2C 0x1c /* Return register address, which depends on the bus type, or -1 for error. */ static int get_reg_addr(enum cr50_register reg) { if (CONFIG(SPI_TPM)) { switch (reg) { case CR50_FW_VER_REG: return CR50_FW_VER_REG_SPI; case CR50_BOARD_CFG_REG: return CR50_BOARD_CFG_REG_SPI; default: return -1; } } if (CONFIG(I2C_TPM)) { switch (reg) { case CR50_FW_VER_REG: return CR50_FW_VER_REG_I2C; case CR50_BOARD_CFG_REG: return CR50_BOARD_CFG_REG_I2C; default: return -1; } } return -1; } static bool cr50_fw_supports_board_cfg(struct cr50_firmware_version *version) { /* Cr50 supports the CR50_BOARD_CFG register from version 0.5.5 / 0.6.5 * and onwards. */ if (version->epoch > 0 || version->major >= 7 || (version->major >= 5 && version->minor >= 5)) return true; printk(BIOS_INFO, "Cr50 firmware does not support CR50_BOARD_CFG, version: %d.%d.%d\n", version->epoch, version->major, version->minor); return false; } /* * Expose method to read the CR50_BOARD_CFG register, will return zero if * register not supported by Cr50 firmware. */ static uint32_t cr50_get_board_cfg(void) { struct cr50_firmware_version ver; uint32_t value; if (cr50_get_firmware_version(&ver) != CB_SUCCESS) return 0; if (!cr50_fw_supports_board_cfg(&ver)) return 0; const enum cb_err ret = tis_vendor_read(get_reg_addr(CR50_BOARD_CFG_REG), &value, sizeof(value)); if (ret != CB_SUCCESS) { printk(BIOS_ERR, "Error reading from Cr50\n"); return 0; } return value & CR50_BOARD_CFG_FEATUREBITS_MASK; } __weak int cr50_plat_irq_status(void) { static int warning_displayed; if (!warning_displayed) { printk(BIOS_WARNING, "%s() not implemented, wasting 20ms to wait on Cr50!\n", __func__); warning_displayed = 1; } mdelay(CR50_TIMEOUT_NOIRQ_MS); return 1; } /** * Set the BOARD_CFG register on the TPM chip to a particular compile-time constant value. */ enum cb_err cr50_set_board_cfg(void) { /* If we get here and we aren't cr50, then we must be ti50 which does * not currently need to support a board_cfg register. */ if (!CONFIG(TPM_GOOGLE_CR50)) return CB_SUCCESS; struct cr50_firmware_version ver; enum cb_err ret; uint32_t value; if (cr50_get_firmware_version(&ver) != CB_SUCCESS) return CB_ERR; if (!cr50_fw_supports_board_cfg(&ver)) return CB_ERR; /* Set the CR50_BOARD_CFG register, for e.g. asking cr50 to use longer ready pulses. */ ret = tis_vendor_read(get_reg_addr(CR50_BOARD_CFG_REG), &value, sizeof(value)); if (ret != CB_SUCCESS) { printk(BIOS_ERR, "Error reading from Cr50\n"); return CB_ERR; } if ((value & CR50_BOARD_CFG_FEATUREBITS_MASK) == CR50_BOARD_CFG_VALUE) { printk(BIOS_INFO, "Current CR50_BOARD_CFG = 0x%08x, matches desired = 0x%08x\n", value, CR50_BOARD_CFG_VALUE); return CB_SUCCESS; } if (value & CR50_BOARD_CFG_LOCKBIT_MASK) { /* The high bit is set, meaning that the Cr50 is already locked on a particular * value for the register, but not the one we wanted. */ printk(BIOS_ERR, "Current CR50_BOARD_CFG = 0x%08x, does not match" "desired = 0x%08x\n", value, CR50_BOARD_CFG_VALUE); return CB_ERR; } printk(BIOS_INFO, "Current CR50_BOARD_CFG = 0x%08x, setting to 0x%08x\n", value, CR50_BOARD_CFG_VALUE); value = CR50_BOARD_CFG_VALUE; ret = tis_vendor_write(get_reg_addr(CR50_BOARD_CFG_REG), &value, sizeof(value)); if (ret != CB_SUCCESS) { printk(BIOS_ERR, "Error writing to cr50\n"); return ret; } return CB_SUCCESS; } bool cr50_is_long_interrupt_pulse_enabled(void) { if (CONFIG(TPM_GOOGLE_CR50)) return !!(cr50_get_board_cfg() & CR50_BOARD_CFG_100US_READY_PULSE); /* Ti50 and future GSCs will support only long interrupt pulses. */ return true; } static enum cb_err cr50_parse_fw_version(const char *version_str, struct cr50_firmware_version *ver) { int epoch, major, minor; char *number = strstr(version_str, " RW_A:"); if (!number) number = strstr(version_str, " RW_B:"); if (!number) return CB_ERR_ARG; number += 6; /* Skip past the colon. */ epoch = skip_atoi(&number); if (*number++ != '.') return CB_ERR_ARG; major = skip_atoi(&number); if (*number++ != '.') return CB_ERR_ARG; minor = skip_atoi(&number); ver->epoch = epoch; ver->major = major; ver->minor = minor; return CB_SUCCESS; } enum cb_err cr50_get_firmware_version(struct cr50_firmware_version *version) { static struct cr50_firmware_version cr50_firmware_version; if (cr50_firmware_version.epoch || cr50_firmware_version.major || cr50_firmware_version.minor) goto success; int chunk_count = 0; size_t chunk_size = 50; char version_str[301]; int addr = get_reg_addr(CR50_FW_VER_REG); /* * Does not really matter what's written, this just makes sure * the version is reported from the beginning. */ tis_vendor_write(addr, &chunk_size, 1); /* * Read chunk_size bytes at a time, last chunk will be zero padded. */ do { uint8_t *buf = (uint8_t *)version_str + chunk_count * chunk_size; tis_vendor_read(addr, buf, chunk_size); if (!version_str[++chunk_count * chunk_size - 1]) /* Zero padding detected: end of string. */ break; /* Check if there is enough room for reading one more chunk. */ } while (chunk_count * chunk_size < sizeof(version_str) - chunk_size); version_str[chunk_count * chunk_size] = '\0'; printk(BIOS_INFO, "Firmware version: %s\n", version_str); if (cr50_parse_fw_version(version_str, &cr50_firmware_version) != CB_SUCCESS) { printk(BIOS_ERR, "Did not recognize Cr50 version format\n"); return CB_ERR; } success: if (version) *version = cr50_firmware_version; return CB_SUCCESS; } enum cb_err cr50_wait_tpm_ready(void) { struct stopwatch sw; stopwatch_init_msecs_expire(&sw, CONFIG_GOOGLE_TPM_IRQ_TIMEOUT_MS); while (!cr50_plat_irq_status()) if (stopwatch_expired(&sw)) { printk(BIOS_ERR, "Cr50 TPM IRQ timeout!\n"); return CB_ERR; } return CB_SUCCESS; }