/* * This file is part of the coreboot project. * * Copyright (C) 2009 coresystems GmbH * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2003 Ollie Lo <ollielo@hotmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <console/console.h> #include <pc80/keyboard.h> #include <device/device.h> #include <arch/io.h> #include <delay.h> #include <types.h> #if CONFIG_HAVE_ACPI_RESUME #include <arch/acpi.h> #endif #define KBD_DATA 0x60 #define KBD_COMMAND 0x64 #define KBD_STATUS 0x64 #define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec) #define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host) // Keyboard Controller Commands #define KBC_CMD_READ_COMMAND 0x20 // Read command byte #define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte #define KBC_CMD_SELF_TEST 0xAA // Controller self-test #define KBC_CMD_KBD_TEST 0xAB // Keyboard Interface test /* The Keyboard controller command byte * BIT | Description * ----+------------------------------------------------------- * 7 | reserved, must be zero * 6 | XT Translation, (1 = on, 0 = off) * 5 | Disable Mouse Port (1 = disable, 0 = enable) * 4 | Disable Keyboard Port (1 = disable, 0 = enable) * 3 | reserved, must be zero * 2 | System Flag (1 = self-test passed. DO NOT SET TO ZERO) * 1 | Mouse Port Interrupts (1 = enable, 0 = disable) * 0 | Keyboard Port Interrupts (1 = enable, 0 = disable) */ // Keyboard Controller Replies #define KBC_REPLY_SELFTEST_OK 0x55 // controller self-test succeeded // // Keyboard Replies // #define KBD_REPLY_POR 0xAA // Power on reset #define KBD_REPLY_ACK 0xFA // Command ACK #define KBD_REPLY_RESEND 0xFE // Command NACK, send command again /* Wait 400ms for keyboard controller answers */ #define KBC_TIMEOUT_IN_MS 400 static int kbc_input_buffer_empty(void) { u32 timeout; for (timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(KBD_STATUS) & KBD_IBF); timeout--) mdelay(1); if (!timeout) printk(BIOS_WARNING, "Unexpected Keyboard controller input buffer full\n"); return !!timeout; } static int kbc_output_buffer_full(void) { u32 timeout; for (timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(KBD_STATUS) & KBD_OBF) == 0); timeout--) mdelay(1); if (!timeout) printk(BIOS_INFO, "Keyboard controller output buffer result timeout\n"); return !!timeout; } static int kbc_cleanup_buffers(void) { u32 timeout; for (timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(KBD_STATUS) & (KBD_OBF | KBD_IBF)); timeout--) { mdelay(1); inb(KBD_DATA); } if (!timeout) { printk(BIOS_ERR, "Couldn't cleanup the keyboard controller buffers\n"); printk(BIOS_ERR, "Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n", KBD_STATUS, inb(KBD_STATUS), KBD_DATA, inb(KBD_DATA)); } return !!timeout; } static enum cb_err kbc_self_test(void) { u8 self_test; /* Clean up any junk that might have been in the KBC. * Both input and output buffers must be empty. */ if (!kbc_cleanup_buffers()) return CB_KBD_CONTROLLER_FAILURE; /* reset/self test 8042 - send cmd 0xAA */ outb(KBC_CMD_SELF_TEST, KBD_COMMAND); if (!kbc_output_buffer_full()) { /* There probably is no keyboard controller. */ printk(BIOS_ERR, "Could not reset keyboard controller.\n"); return CB_KBD_CONTROLLER_FAILURE; } /* read self-test result, 0x55 is returned in the output buffer */ self_test = inb(KBD_DATA); if (self_test != 0x55) { printk(BIOS_ERR, "Keyboard Controller self-test failed: 0x%x\n", self_test); return CB_KBD_CONTROLLER_FAILURE; } /* ensure the buffers are empty */ kbc_cleanup_buffers(); /* keyboard interface test */ outb(KBC_CMD_KBD_TEST, KBD_COMMAND); if (!kbc_output_buffer_full()) { printk(BIOS_ERR, "Keyboard Interface test timed out.\n"); return CB_KBD_CONTROLLER_FAILURE; } /* read test result, 0x00 should be returned in case of no failures */ self_test = inb(KBD_DATA); if (self_test != 0x00) { printk(BIOS_ERR, "Keyboard Interface test failed: 0x%x\n", self_test); return CB_KBD_INTERFACE_FAILURE; } return CB_SUCCESS; } static u8 send_keyboard(u8 command) { u8 regval = 0; u8 resend = 10; do { if (!kbc_input_buffer_empty()) return 0; outb(command, KBD_DATA); /* the reset command takes much longer then normal commands and * even worse, some keyboards do send the ACK _after_ doing the * reset */ if (command == 0xFF) { u8 retries; for (retries = 9; retries && !kbc_output_buffer_full(); retries--) ; } if (!kbc_output_buffer_full()) { printk(BIOS_ERR, "Could not send keyboard command %02x\n", command); return 0; } regval = inb(KBD_DATA); --resend; } while (regval == KBD_REPLY_RESEND && resend > 0); return regval; } void pc_keyboard_init(void) { u8 retries; u8 regval; enum cb_err err; if (!CONFIG_DRIVERS_PS2_KEYBOARD) return; #if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type == 3) return; #endif printk(BIOS_DEBUG, "Keyboard init...\n"); /* Run a keyboard controller self-test */ err = kbc_self_test(); /* Ignore iterface failure as it's non-fatal. */ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE) return; /* Enable keyboard interface - No IRQ */ if (!kbc_input_buffer_empty()) return; outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) return; outb(0x20, KBD_DATA); /* send cmd: enable keyboard */ if (!kbc_input_buffer_empty()) { printk(BIOS_INFO, "Timeout while enabling keyboard\n"); return; } /* clean up any junk that might have been in the keyboard */ if (!kbc_cleanup_buffers()) return; /* reset keyboard and self test (keyboard side) */ regval = send_keyboard(0xFF); if (regval == KBD_REPLY_RESEND) { /* keeps sending RESENDs, probably no keyboard. */ printk(BIOS_INFO, "No PS/2 keyboard detected.\n"); return; } if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard reset failed ACK: 0x%x\n", regval); return; } /* the reset command takes some time, so wait a little longer */ for (retries = 9; retries && !kbc_output_buffer_full(); retries--) ; if (!kbc_output_buffer_full()) { printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n"); return; } regval = inb(KBD_DATA); if (regval != 0xAA) { printk(BIOS_ERR, "Keyboard reset selftest failed: 0x%x\n", regval); return; } /* * The following set scancode stuff is what normal BIOS do. It could be * argued that coreboot shouldn't set the scan code..... */ /* disable the keyboard */ regval = send_keyboard(0xF5); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval); return; } /* Set scancode command */ regval = send_keyboard(0xF0); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n", regval); return; } /* Set scancode mode 2 */ regval = send_keyboard(0x02); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard set scancode mode failed ACK: 0x%x\n", regval); return; } /* All is well - enable keyboard interface */ if (!kbc_input_buffer_empty()) return; outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) return; outb(0x65, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */ if (!kbc_input_buffer_empty()) { printk(BIOS_ERR, "Timeout during keyboard enable\n"); return; } /* enable the keyboard */ regval = send_keyboard(0xF4); if (regval != KBD_REPLY_ACK) { printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval); return; } } /* * Support PS/2 mode - oddball SIOs(KBC) need this setup * Not well documented. Google - 0xcb keyboard controller * This is called before pc_keyboard_init(). */ void set_kbc_ps2_mode(void) { enum cb_err err; /* Run a keyboard controller self-test */ err = kbc_self_test(); /* Ignore iterface failure as it's non-fatal. */ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE) return; /* Support PS/2 mode */ if (!kbc_input_buffer_empty()) return; outb(0xcb, KBD_COMMAND); if (!kbc_input_buffer_empty()) return; outb(0x01, KBD_DATA); kbc_cleanup_buffers(); }