/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include "chip.h" #define RT5663_ACPI_NAME "RT53" #define RT5663_ACPI_HID "10EC5663" #define RT5663_DP_INT(key, val) \ acpi_dp_add_integer(dp, "realtek," key, (val)) static void rt5663_fill_ssdt(const struct device *dev) { struct drivers_i2c_rt5663_config *config = dev->chip_info; const char *scope = acpi_device_scope(dev); struct acpi_i2c i2c = { .address = dev->path.i2c.device, .mode_10bit = dev->path.i2c.mode_10bit, .speed = config->bus_speed ? : I2C_SPEED_FAST, .resource = scope, }; struct acpi_dp *dp; if (!scope) return; /* Device */ acpigen_write_scope(scope); acpigen_write_device(acpi_device_name(dev)); acpigen_write_name_string("_HID", RT5663_ACPI_HID); acpigen_write_name_integer("_UID", config->uid); acpigen_write_name_string("_DDN", dev->chip_ops->name); acpigen_write_STA(acpi_device_status(dev)); /* Resources */ acpigen_write_name("_CRS"); acpigen_write_resourcetemplate_header(); acpi_device_write_i2c(&i2c); /* Allow either GpioInt() or Interrupt() */ if (config->irq_gpio.pin_count) acpi_device_write_gpio(&config->irq_gpio); else acpi_device_write_interrupt(&config->irq); acpigen_write_resourcetemplate_footer(); /* Device Properties */ dp = acpi_dp_new_table("_DSD"); if (config->irq_gpio.pin_count) acpi_dp_add_gpio(dp, "irq-gpios", acpi_device_path(dev), 0, 0, config->irq_gpio.active_low); RT5663_DP_INT("dc_offset_l_manual", config->dc_offset_l_manual); RT5663_DP_INT("dc_offset_r_manual", config->dc_offset_r_manual); RT5663_DP_INT("dc_offset_l_manual_mic", config->dc_offset_l_manual_mic); RT5663_DP_INT("dc_offset_r_manual_mic", config->dc_offset_r_manual_mic); acpi_dp_write(dp); acpigen_pop_len(); /* Device */ acpigen_pop_len(); /* Scope */ printk(BIOS_INFO, "%s: %s address 0%xh\n", acpi_device_path(dev), dev->chip_ops->name, dev->path.i2c.device); } static const char *rt5663_acpi_name(const struct device *dev) { return RT5663_ACPI_NAME; } static struct device_operations rt5663_ops = { .read_resources = noop_read_resources, .set_resources = noop_set_resources, .acpi_name = rt5663_acpi_name, .acpi_fill_ssdt = rt5663_fill_ssdt, }; static void rt5663_enable(struct device *dev) { dev->ops = &rt5663_ops; } struct chip_operations drivers_i2c_rt5663_ops = { .name = "Realtek RT5663 Codec", .enable_dev = rt5663_enable };