/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include "chip.h" #define CS42L42_ACPI_NAME "CRUS" #define CS42L42_ACPI_HID "10134242" static void cs42l42_fill_ssdt(const struct device *dev) { struct drivers_i2c_cs42l42_config *config = dev->chip_info; const char *scope = acpi_device_scope(dev); const char *path = acpi_device_path(dev); struct acpi_i2c i2c = { .address = dev->path.i2c.device, .mode_10bit = dev->path.i2c.mode_10bit, .speed = config->bus_speed ? : I2C_SPEED_FAST, .resource = scope, }; struct acpi_dp *dsd; int gpio_index = 0; if (!scope) return; /* Device */ acpigen_write_scope(scope); acpigen_write_device(acpi_device_name(dev)); acpigen_write_name_string("_HID", CS42L42_ACPI_HID); acpigen_write_name_integer("_UID", 0); acpigen_write_name_string("_DDN", dev->chip_ops->name); acpigen_write_STA(acpi_device_status(dev)); /* Resources */ acpigen_write_name("_CRS"); acpigen_write_resourcetemplate_header(); acpi_device_write_i2c(&i2c); /* Use either Interrupt() or GpioInt() */ if (config->irq_gpio.pin_count) acpi_device_write_gpio(&config->irq_gpio); else acpi_device_write_interrupt(&config->irq); /* for cs42l42reset gpio */ if (config->reset_gpio.pin_count) acpi_device_write_gpio(&config->reset_gpio); acpigen_write_resourcetemplate_footer(); /* AAD Child Device Properties */ dsd = acpi_dp_new_table("_DSD"); if (config->irq_gpio.pin_count) acpi_dp_add_gpio(dsd, "irq-gpios", path, gpio_index++, /* Index = 0 */ 0, /* Pin = 0 (There is a single pin in the GPIO resource). */ config->irq_gpio.active_low); if (config->reset_gpio.pin_count) acpi_dp_add_gpio(dsd, "reset-gpios", path, gpio_index++, /* Index = 0 or 1 (if irq gpio is written). */ 0, /* Pin = 0 (There is a single pin in the GPIO resource). */ config->reset_gpio.active_low); acpi_dp_add_integer(dsd, "cirrus,ts-inv", config->ts_inv ? 1 : 0); acpi_dp_add_integer(dsd, "cirrus,ts-dbnc-rise", config->ts_dbnc_rise); acpi_dp_add_integer(dsd, "cirrus,ts-dbnc-fall", config->ts_dbnc_fall); acpi_dp_add_integer(dsd, "cirrus,btn-det-init-dbnce", config->btn_det_init_dbnce); if (config->btn_det_init_dbnce > 200) { printk(BIOS_ERR, "%s: Incorrect btn_det_init_dbnce(%d). Using default of 100ms\n", __func__, config->btn_det_init_dbnce); config->btn_det_init_dbnce = 100; } acpi_dp_add_integer(dsd, "cirrus,btn-det-event-dbnce", config->btn_det_event_dbnce); if (config->btn_det_event_dbnce > 100) { printk(BIOS_ERR, "%s: Incorrect btn_det_event_dbnce(%d). Using default of 10ms\n", __func__, config->btn_det_event_dbnce); config->btn_det_event_dbnce = 10; } acpi_dp_add_integer_array(dsd, "cirrus,bias-lvls", config->bias_lvls, 4); acpi_dp_add_integer(dsd, "cirrus,hs-bias-ramp-rate", config->hs_bias_ramp_rate); if (config->hs_bias_sense_disable) acpi_dp_add_integer(dsd, "cirrus,hs-bias-sense-disable", 1); /* Write Device Property Hierarchy */ acpi_dp_write(dsd); acpigen_pop_len(); /* Device */ acpigen_pop_len(); /* Scope */ printk(BIOS_INFO, "%s: %s address 0%xh irq %d\n", acpi_device_path(dev), dev->chip_ops->name, dev->path.i2c.device, config->irq.pin); } static const char *cs42l42_acpi_name(const struct device *dev) { return CS42L42_ACPI_NAME; } static struct device_operations cs42l42_ops = { .read_resources = noop_read_resources, .set_resources = noop_set_resources, .acpi_name = cs42l42_acpi_name, .acpi_fill_ssdt = cs42l42_fill_ssdt, }; static void cs42l42_enable(struct device *dev) { dev->ops = &cs42l42_ops; } struct chip_operations drivers_i2c_cs42l42_ops = { .name = "Cirrus Logic CS42l42 Audio Codec", .enable_dev = cs42l42_enable };