/* SPDX-License-Identifier: GPL-2.0-only */ /* Driver for Genesys Logic GL9763E */ #include <console/console.h> #include <device/device.h> #include <device/path.h> #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> #include "gl9763e.h" static void gl9763e_init(struct device *dev) { uint32_t ver; printk(BIOS_INFO, "GL9763E: init\n"); pci_dev_init(dev); /* Set VHS (Vendor Header Space) to be writable */ pci_update_config32(dev, VHS, ~VHS_REV_MASK, VHS_REV_W); /* Set single AXI request */ pci_or_config32(dev, SCR, SCR_AXI_REQ); /* Disable L0s support */ pci_and_config32(dev, CFG_REG_2, ~CFG_REG_2_L0S); /* Set SSC to 30000 ppm */ pci_update_config32(dev, PLL_CTL_2, ~PLL_CTL_2_MAX_SSC_MASK, MAX_SSC_30000PPM); /* Enable SSC */ pci_or_config32(dev, PLL_CTL, PLL_CTL_SSC); /* Check chip version */ ver = pci_read_config32(dev, HW_VER_2); if ((ver & HW_VER_MASK) == REVISION_03) { /* Set clock source for RX path */ pci_update_config32(dev, SD_CLKRX_DLY, ~CLK_SRC_MASK, AFTER_OUTPUT_BUFF); } /* Modify DS delay */ pci_update_config32(dev, SD_CLKRX_DLY, ~HS400_RX_DELAY_MASK, HS400_RX_DELAY); /* Disable Slow mode */ pci_and_config32(dev, EMMC_CTL, ~SLOW_MODE); /* Set VHS to read-only */ pci_update_config32(dev, VHS, ~VHS_REV_MASK, VHS_REV_R); } static struct device_operations gl9763e_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .ops_pci = &pci_dev_ops_pci, .init = gl9763e_init, }; static const unsigned short pci_device_ids[] = { PCI_DEVICE_ID_GLI_9763E, 0 }; static const struct pci_driver genesyslogic_gl9763e __pci_driver = { .ops = &gl9763e_ops, .vendor = PCI_VENDOR_ID_GLI, .devices = pci_device_ids, }; struct chip_operations drivers_generic_genesyslogic_ops = { CHIP_NAME("Genesys Logic GL9763E") };