/* SPDX-License-Identifier: GPL-2.0-only */

/* Driver for BayHub Technology BH720 PCI to eMMC 5.0 HS200 bridge */

#include <console/console.h>
#include <device/device.h>
#include <device/mmio.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <acpi/acpigen.h>
#include <acpi/acpigen_pci.h>
#include "chip.h"
#include "bh720.h"

#define BH720_ACPI_NAME	"BHUB"

static u32 bh720_read_pcr(u32 sdbar, u32 addr)
{
	write32p(sdbar + BH720_MEM_RW_ADR, BH720_MEM_RW_READ | addr);
	return read32p(sdbar + BH720_MEM_RW_DATA);
}

static void bh720_write_pcr(u32 sdbar, u32 addr, u32 data)
{
	write32p(sdbar + BH720_MEM_RW_DATA, data);
	write32p(sdbar + BH720_MEM_RW_ADR, BH720_MEM_RW_WRITE | addr);
}

static void bh720_rmw_pcr(u32 sdbar, u32 addr, u32 clear, u32 set)
{
	u32 data = bh720_read_pcr(sdbar, addr);
	data &= ~clear;
	data |= set;
	bh720_write_pcr(sdbar, addr, data);
}

static void bh720_program_hs200_mode(struct device *dev)
{
	u32 sdbar = pci_read_config32(dev, PCI_BASE_ADDRESS_1);

	/* Enable Memory Access Function */
	write32p(sdbar + BH720_MEM_ACCESS_EN, 0x40000000);
	bh720_write_pcr(sdbar, 0xd0, 0x80000000);

	/* Set EMMC VCCQ 1.8V PCR 0x308[4] */
	bh720_rmw_pcr(sdbar, BH720_PCR_EMMC_SETTING, 0, BH720_PCR_EMMC_SETTING_1_8V);

	/* Set Base clock to 200MHz(PCR 0x304[31:16] = 0x2510) */
	bh720_rmw_pcr(sdbar, BH720_PCR_DrvStrength_PLL, 0xffff << 16, 0x2510 << 16);

	/* Use PLL Base clock PCR 0x3E4[22] = 1 */
	bh720_rmw_pcr(sdbar, BH720_PCR_CSR, 0, BH720_PCR_CSR_EMMC_MODE_SEL);

	/* Disable Memory Access */
	bh720_write_pcr(sdbar, 0xd0, 0x80000001);
	write32p(sdbar + BH720_MEM_ACCESS_EN, 0x80000000);
}

static void bh720_init(struct device *dev)
{
	struct drivers_generic_bayhub_config *config = dev->chip_info;

	pci_dev_init(dev);

	if (config && config->power_saving) {
		/*
		 * This procedure for enabling power-saving mode is from the
		 * BayHub BIOS Implementation Guideline document.
		 */
		pci_write_config32(dev, BH720_PROTECT,
				   BH720_PROTECT_OFF | BH720_PROTECT_LOCK_OFF);
		pci_or_config32(dev, BH720_RTD3_L1, BH720_RTD3_L1_DISABLE_L1);
		pci_or_config32(dev, BH720_LINK_CTRL,
				BH720_LINK_CTRL_L0_ENABLE |
				BH720_LINK_CTRL_L1_ENABLE);
		pci_or_config32(dev, BH720_LINK_CTRL, BH720_LINK_CTRL_CLKREQ);
		pci_update_config32(dev, BH720_MISC2, ~BH720_MISC2_ASPM_DISABLE,
				    BH720_MISC2_APSM_CLKREQ_L1 |
				    BH720_MISC2_APSM_PHY_L1);
		pci_write_config32(dev, BH720_PROTECT,
				   BH720_PROTECT_ON | BH720_PROTECT_LOCK_ON);

		printk(BIOS_INFO, "BayHub BH720: Power-saving enabled (link_ctrl=%#x)\n",
		       pci_read_config32(dev, BH720_LINK_CTRL));
	}

	if (config && !config->disable_hs200_mode)
		bh720_program_hs200_mode(dev);

	if (config && config->vih_tuning_value) {
		/* Tune VIH */
		u32 bh720_pcr_data;
		pci_write_config32(dev, BH720_PROTECT,
			BH720_PROTECT_OFF | BH720_PROTECT_LOCK_OFF);
		bh720_pcr_data = pci_read_config32(dev, BH720_PCR_DrvStrength_PLL);
		bh720_pcr_data &= 0xFFFFFF00;
		bh720_pcr_data |= config->vih_tuning_value;
		pci_write_config32(dev, BH720_PCR_DrvStrength_PLL, bh720_pcr_data);
		pci_write_config32(dev, BH720_PROTECT,
			BH720_PROTECT_ON | BH720_PROTECT_LOCK_ON);
	}
}

static void bh720_fill_ssdt(const struct device *dev)
{
	if (dev->path.type != DEVICE_PATH_PCI) {
		return;
	}

	const char *scope = acpi_device_scope(dev);
	const char *name = acpi_device_name(dev);
	if (!scope || !name)
		return;

	/* Device */
	acpigen_write_scope(scope);
	acpigen_write_device(name);

	acpigen_write_ADR_pci_device(dev);
	acpigen_write_STA(acpi_device_status(dev));

	/* Card */
	acpigen_write_device("CARD");
	acpigen_write_ADR(0x08); //eMMC is always on address 0x8

	/*
	 * Method (_RMV, 0, NotSerialized) { Return (0) }
	 */
	acpigen_write_method("_RMV", 0); /* Method */
	acpigen_emit_byte(RETURN_OP);
	acpigen_write_byte(0);
	acpigen_pop_len(); /* Method */

	acpigen_pop_len(); /* Card */

	acpigen_pop_len(); /* Device */
	acpigen_pop_len(); /* Scope */
}

static const char *bh720_acpi_name(const struct device *dev)
{
	return BH720_ACPI_NAME;
}

static struct device_operations bh720_ops = {
	.read_resources		= pci_dev_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= pci_dev_enable_resources,
	.ops_pci		= &pci_dev_ops_pci,
	.init			= bh720_init,
	.acpi_name		= bh720_acpi_name,
	.acpi_fill_ssdt		= bh720_fill_ssdt
};

static const unsigned short pci_device_ids[] = {
	PCI_DID_O2_BH720,
	0
};

static const struct pci_driver bayhub_bh720 __pci_driver = {
	.ops		= &bh720_ops,
	.vendor		= PCI_VID_O2,
	.devices	= pci_device_ids,
};

struct chip_operations drivers_generic_bayhub_ops = {
	.name = "BayHub Technology BH720 PCI to eMMC 5.0 HS200 bridge",
};