/* SPDX-License-Identifier: GPL-2.0-only */ #include <edid.h> #include <types.h> #ifndef __ANX7625_H__ #define __ANX7625_H__ #ifndef LOG_TAG #define LOG_TAG "anx7625dp" #endif #define ANX7625_DRV_VERSION "0.1.04" /* Loading OCM re-trying times */ #define OCM_LOADING_TIME 10 /********* ANX7625 Register **********/ #define ANXI2CSIM #ifdef ANXI2CSIM #define TX_P0_ADDR 0x38 #define TX_P1_ADDR 0x3D #define TX_P2_ADDR 0x39 #define RX_P0_ADDR 0x3F #define RX_P1_ADDR 0x42 #define RX_P2_ADDR 0x2A #define TCPC_INTERFACE_ADDR 0x2C #else #define TX_P0_ADDR 0x70 #define TX_P1_ADDR 0x7A #define TX_P2_ADDR 0x72 #define RX_P0_ADDR 0x7e #define RX_P1_ADDR 0x84 #define RX_P2_ADDR 0x54 #define TCPC_INTERFACE_ADDR 0x58 #endif #define RSVD_00_ADDR 0x00 #define RSVD_D1_ADDR 0xD1 #define RSVD_60_ADDR 0x60 #define RSVD_39_ADDR 0x39 #define RSVD_7F_ADDR 0x7F /* anx7625 clock frequency in Hz */ #define XTAL_FRQ (27*1000000) #define POST_DIVIDER_MIN 1 #define POST_DIVIDER_MAX 16 #define PLL_OUT_FREQ_MIN 520000000UL #define PLL_OUT_FREQ_MAX 730000000UL #define PLL_OUT_FREQ_ABS_MIN 300000000UL #define PLL_OUT_FREQ_ABS_MAX 800000000UL #define MAX_UNSIGNED_24BIT 16777215UL /***************************************************************/ /* Register definition of device address 0x58 */ #define PRODUCT_ID_L 0x02 #define PRODUCT_ID_H 0x03 #define INTR_ALERT_1 0xCC #define INTR_SOFTWARE_INT (1<<3) #define INTR_RECEIVED_MSG (1<<5) #define SYSTEM_STSTUS 0x45 #define INTERFACE_CHANGE_INT 0x44 #define HPD_STATUS_CHANGE 0x80 #define HPD_STATUS 0x80 /******** END of I2C Address 0x58 ********/ /***************************************************************/ /* Register definition of device address 0x70 */ #define I2C_ADDR_70_DPTX 0x70 #define SP_TX_LINK_BW_SET_REG 0xA0 #define SP_TX_LANE_COUNT_SET_REG 0xA1 #define M_VID_0 0xC0 #define M_VID_1 0xC1 #define M_VID_2 0xC2 #define N_VID_0 0xC3 #define N_VID_1 0xC4 #define N_VID_2 0xC5 /***************************************************************/ /* Register definition of device address 0x72 */ #define AUX_RST 0x04 #define RST_CTRL2 0x07 #define SP_TX_TOTAL_LINE_STA_L 0x24 #define SP_TX_TOTAL_LINE_STA_H 0x25 #define SP_TX_ACT_LINE_STA_L 0x26 #define SP_TX_ACT_LINE_STA_H 0x27 #define SP_TX_V_F_PORCH_STA 0x28 #define SP_TX_V_SYNC_STA 0x29 #define SP_TX_V_B_PORCH_STA 0x2A #define SP_TX_TOTAL_PIXEL_STA_L 0x2B #define SP_TX_TOTAL_PIXEL_STA_H 0x2C #define SP_TX_ACT_PIXEL_STA_L 0x2D #define SP_TX_ACT_PIXEL_STA_H 0x2E #define SP_TX_H_F_PORCH_STA_L 0x2F #define SP_TX_H_F_PORCH_STA_H 0x30 #define SP_TX_H_SYNC_STA_L 0x31 #define SP_TX_H_SYNC_STA_H 0x32 #define SP_TX_H_B_PORCH_STA_L 0x33 #define SP_TX_H_B_PORCH_STA_H 0x34 #define SP_TX_VID_CTRL 0x84 #define SP_TX_BPC_MASK 0xE0 #define SP_TX_BPC_6 0x00 #define SP_TX_BPC_8 0x20 #define SP_TX_BPC_10 0x40 #define SP_TX_BPC_12 0x60 #define VIDEO_BIT_MATRIX_12 0x4c #define AUDIO_CHANNEL_STATUS_1 0xd0 #define AUDIO_CHANNEL_STATUS_2 0xd1 #define AUDIO_CHANNEL_STATUS_3 0xd2 #define AUDIO_CHANNEL_STATUS_4 0xd3 #define AUDIO_CHANNEL_STATUS_5 0xd4 #define AUDIO_CHANNEL_STATUS_6 0xd5 #define TDM_SLAVE_MODE 0x10 #define I2S_SLAVE_MODE 0x08 #define AUDIO_CONTROL_REGISTER 0xe6 #define TDM_TIMING_MODE 0x08 #define I2C_ADDR_72_DPTX 0x72 #define VIDEO_CONTROL_0 0x08 #define ACTIVE_LINES_L 0x14 #define ACTIVE_LINES_H 0x15 /* note: bit[7:6] are reserved */ #define VERTICAL_FRONT_PORCH 0x16 #define VERTICAL_SYNC_WIDTH 0x17 #define VERTICAL_BACK_PORCH 0x18 #define HORIZONTAL_TOTAL_PIXELS_L 0x19 #define HORIZONTAL_TOTAL_PIXELS_H 0x1A /* note: bit[7:6] are reserved */ #define HORIZONTAL_ACTIVE_PIXELS_L 0x1B #define HORIZONTAL_ACTIVE_PIXELS_H 0x1C /* note: bit[7:6] are reserved */ #define HORIZONTAL_FRONT_PORCH_L 0x1D #define HORIZONTAL_FRONT_PORCH_H 0x1E /* note: bit[7:4] are reserved */ #define HORIZONTAL_SYNC_WIDTH_L 0x1F #define HORIZONTAL_SYNC_WIDTH_H 0x20 /* note: bit[7:4] are reserved */ #define HORIZONTAL_BACK_PORCH_L 0x21 #define HORIZONTAL_BACK_PORCH_H 0x22 /* note: bit[7:4] are reserved */ /******** END of I2C Address 0x72 *********/ /***************************************************************/ /* Register definition of device address 0x7e */ #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E #define XTAL_FRQ_SEL 0x3F /* bit field positions */ #define XTAL_FRQ_SEL_POS 5 /* bit field values */ #define XTAL_FRQ_19M2 (0 << XTAL_FRQ_SEL_POS) #define XTAL_FRQ_27M (4 << XTAL_FRQ_SEL_POS) #define R_DSC_CTRL_0 0x40 #define READ_STATUS_EN 7 #define CLK_1MEG_RB 6 /* 1MHz clock reset; 0=reset, 0=reset release */ #define DSC_BIST_DONE 1 /* bit[5:1]: 1=DSC MBIST pass */ #define DSC_EN 0x01 /* 1=DSC enabled, 0=DSC disabled */ #define OCM_FW_VERSION 0x31 #define OCM_FW_REVERSION 0x32 #define AP_AUX_ADDR_7_0 0x11 #define AP_AUX_ADDR_15_8 0x12 #define AP_AUX_ADDR_19_16 0x13 /* note: bit[0:3] AUX status, bit 4 op_en, bit 5 address only */ #define AP_AUX_CTRL_STATUS 0x14 #define AP_AUX_CTRL_OP_EN 0x10 #define AP_AUX_CTRL_ADDRONLY 0x20 #define AP_AUX_BUFF_START 0x15 #define PIXEL_CLOCK_L 0x25 #define PIXEL_CLOCK_H 0x26 #define AP_AUX_COMMAND 0x27 /* com+len */ /* bit 0&1: 3D video structure */ /* 0x01: frame packing, 0x02:Line alternative, 0x03:Side-by-side(full) */ #define AP_AV_STATUS 0x28 #define AP_VIDEO_CHG (1<<2) #define AP_AUDIO_CHG (1<<3) #define AP_MIPI_MUTE (1<<4) /* 1:MIPI input mute, 0: ummute */ #define AP_MIPI_RX_EN (1<<5) /* 1: MIPI RX input in 0: no RX in */ #define AP_DISABLE_PD (1<<6) #define AP_DISABLE_DISPLAY (1<<7) /***************************************************************/ /* Register definition of device address 0x84 */ #define MIPI_PHY_CONTROL_3 0x03 #define MIPI_HS_PWD_CLK 7 #define MIPI_HS_RT_CLK 6 #define MIPI_PD_CLK 5 #define MIPI_CLK_RT_MANUAL_PD_EN 4 #define MIPI_CLK_HS_MANUAL_PD_EN 3 #define MIPI_CLK_DET_DET_BYPASS 2 #define MIPI_CLK_MISS_CTRL 1 #define MIPI_PD_LPTX_CH_MANUAL_PD_EN 0 #define MIPI_LANE_CTRL_0 0x05 #define MIPI_TIME_HS_PRPR 0x08 /* After MIPI RX protocol layer received this many video frames, */ /* protocol layer starts to reconstruct video stream from PHY */ #define MIPI_VIDEO_STABLE_CNT 0x0A #define MIPI_LANE_CTRL_10 0x0F #define MIPI_DIGITAL_ADJ_1 0x1B #define MIPI_PLL_M_NUM_23_16 0x1E #define MIPI_PLL_M_NUM_15_8 0x1F #define MIPI_PLL_M_NUM_7_0 0x20 #define MIPI_PLL_N_NUM_23_16 0x21 #define MIPI_PLL_N_NUM_15_8 0x22 #define MIPI_PLL_N_NUM_7_0 0x23 #define MIPI_DIGITAL_PLL_6 0x2A /* bit[7:6]: VCO band control, only effective */ /* when MIPI_PLL_FORCE_BAND_EN (0x84:0x2B[6]) is 1 */ #define MIPI_M_NUM_READY 0x10 #define MIPI_N_NUM_READY 0x08 #define STABLE_INTEGER_CNT_EN 0x04 #define MIPI_PLL_TEST_BIT 0 /* bit[1:0]: test point output select - */ /* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */ #define MIPI_DIGITAL_PLL_7 0x2B #define MIPI_PLL_FORCE_N_EN 7 #define MIPI_PLL_FORCE_BAND_EN 6 #define MIPI_PLL_VCO_TUNE_REG 4 /* bit[5:4]: VCO metal capacitance - */ /* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */ #define MIPI_PLL_VCO_TUNE_REG_VAL 0x30 #define MIPI_PLL_PLL_LDO_BIT 2 /* bit[3:2]: vco_v2i power - */ /* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */ #define MIPI_PLL_RESET_N 0x02 #define MIPI_FRQ_FORCE_NDET 0 #define MIPI_ALERT_CLR_0 0x2D #define HS_link_error_clear 7 /* This bit itself is S/C, and it clears 0x84:0x31[7] */ #define MIPI_ALERT_OUT_0 0x31 #define check_sum_err_hs_sync 7 /* This bit is cleared by 0x84:0x2D[7] */ #define MIPI_DIGITAL_PLL_8 0x33 #define MIPI_POST_DIV_VAL 4 /* n means divided by (n+1), n = 0~15 */ #define MIPI_EN_LOCK_FRZ 3 #define MIPI_FRQ_COUNTER_RST 2 #define MIPI_FRQ_SET_REG_8 1 /* bit 0 is reserved */ #define MIPI_DIGITAL_PLL_9 0x34 #define MIPI_DIGITAL_PLL_16 0x3B #define MIPI_FRQ_FREEZE_NDET 7 #define MIPI_FRQ_REG_SET_ENABLE 6 #define MIPI_REG_FORCE_SEL_EN 5 #define MIPI_REG_SEL_DIV_REG 4 #define MIPI_REG_FORCE_PRE_DIV_EN 3 /* bit 2 is reserved */ #define MIPI_FREF_D_IND 1 #define REF_CLK_27000kHz 1 #define REF_CLK_19200kHz 0 #define MIPI_REG_PLL_PLL_TEST_ENABLE 0 #define MIPI_DIGITAL_PLL_18 0x3D #define FRQ_COUNT_RB_SEL 7 #define REG_FORCE_POST_DIV_EN 6 #define MIPI_DPI_SELECT 5 #define SELECT_DSI 1 #define SELECT_DPI 0 #define REG_BAUD_DIV_RATIO 0 #define H_BLANK_L 0x3E /* for DSC only */ #define H_BLANK_H 0x3F /* for DSC only; note: bit[7:6] are reserved */ #define MIPI_SWAP 0x4A #define MIPI_SWAP_CH0 7 #define MIPI_SWAP_CH1 6 #define MIPI_SWAP_CH2 5 #define MIPI_SWAP_CH3 4 #define MIPI_SWAP_CLK 3 /* bit[2:0] are reserved */ /******** END of I2C Address 0x84 *********/ /* DPCD regs */ #define DPCD_DPCD_REV 0x00 #define DPCD_MAX_LINK_RATE 0x01 #define DPCD_MAX_LANE_COUNT 0x02 /********* ANX7625 Register End **********/ /***************** Display *****************/ enum AudioFs { AUDIO_FS_441K = 0x00, AUDIO_FS_48K = 0x02, AUDIO_FS_32K = 0x03, AUDIO_FS_882K = 0x08, AUDIO_FS_96K = 0x0a, AUDIO_FS_1764K = 0x0c, AUDIO_FS_192K = 0x0e }; enum AudioWdLen { AUDIO_W_LEN_16_20MAX = 0x02, AUDIO_W_LEN_18_20MAX = 0x04, AUDIO_W_LEN_17_20MAX = 0x0c, AUDIO_W_LEN_19_20MAX = 0x08, AUDIO_W_LEN_20_20MAX = 0x0a, AUDIO_W_LEN_20_24MAX = 0x03, AUDIO_W_LEN_22_24MAX = 0x05, AUDIO_W_LEN_21_24MAX = 0x0d, AUDIO_W_LEN_23_24MAX = 0x09, AUDIO_W_LEN_24_24MAX = 0x0b }; #define I2S_CH_2 0x01 #define TDM_CH_4 0x03 #define TDM_CH_6 0x05 #define TDM_CH_8 0x07 #define MAX_DPCD_BUFFER_SIZE 16 #define ONE_BLOCK_SIZE 128 #define FOUR_BLOCK_SIZE (128*4) struct display_timing { unsigned int pixelclock; unsigned int hactive; unsigned int hfront_porch; unsigned int hback_porch; unsigned int hsync_len; unsigned int vactive; unsigned int vfront_porch; unsigned int vback_porch; unsigned int vsync_len; unsigned int k_val; }; int anx7625_dp_start(uint8_t bus, const struct edid *edid); int anx7625_dp_get_edid(uint8_t bus, struct edid *out); int anx7625_init(uint8_t bus); #endif /* __ANX7625_H__ */