/* * This file is part of the coreboot project. * * It was originally based on the Linux kernel (drivers/pci/pci.c). * * Modifications are: * Copyright (C) 2003-2004 Linux Networx * (Written by Eric Biederman for Linux Networx) * Copyright (C) 2003-2006 Ronald G. Minnich * Copyright (C) 2004-2005 Li-Ta Lo * Copyright (C) 2005-2006 Tyan * (Written by Yinghai Lu for Tyan) * Copyright (C) 2005-2009 coresystems GmbH * (Written by Stefan Reinauer for coresystems GmbH) */ /* * PCI Bus Services, see include/linux/pci.h for further explanation. * * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter, * David Mosberger-Tang * * Copyright 1997 -- 1999 Martin Mares */ #include #include #include #include #include #include #include #include #include #if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT #include #endif #if CONFIG_PCIX_PLUGIN_SUPPORT #include #endif #if CONFIG_PCIEXP_PLUGIN_SUPPORT #include #endif #if CONFIG_AGP_PLUGIN_SUPPORT #include #endif #if CONFIG_CARDBUS_PLUGIN_SUPPORT #include #endif #if CONFIG_PC80_SYSTEM #include #endif #if CONFIG_HAVE_ACPI_RESUME && !CONFIG_S3_VGA_ROM_RUN #include #endif #if CONFIG_CHROMEOS #include #endif u8 pci_moving_config8(struct device *dev, unsigned int reg) { u8 value, ones, zeroes; value = pci_read_config8(dev, reg); pci_write_config8(dev, reg, 0xff); ones = pci_read_config8(dev, reg); pci_write_config8(dev, reg, 0x00); zeroes = pci_read_config8(dev, reg); pci_write_config8(dev, reg, value); return ones ^ zeroes; } u16 pci_moving_config16(struct device *dev, unsigned int reg) { u16 value, ones, zeroes; value = pci_read_config16(dev, reg); pci_write_config16(dev, reg, 0xffff); ones = pci_read_config16(dev, reg); pci_write_config16(dev, reg, 0x0000); zeroes = pci_read_config16(dev, reg); pci_write_config16(dev, reg, value); return ones ^ zeroes; } u32 pci_moving_config32(struct device *dev, unsigned int reg) { u32 value, ones, zeroes; value = pci_read_config32(dev, reg); pci_write_config32(dev, reg, 0xffffffff); ones = pci_read_config32(dev, reg); pci_write_config32(dev, reg, 0x00000000); zeroes = pci_read_config32(dev, reg); pci_write_config32(dev, reg, value); return ones ^ zeroes; } /** * Given a device, a capability type, and a last position, return the next * matching capability. Always start at the head of the list. * * @param dev Pointer to the device structure. * @param cap PCI_CAP_LIST_ID of the PCI capability we're looking for. * @param last Location of the PCI capability register to start from. * @return The next matching capability. */ unsigned pci_find_next_capability(struct device *dev, unsigned cap, unsigned last) { unsigned pos = 0; u16 status; unsigned reps = 48; status = pci_read_config16(dev, PCI_STATUS); if (!(status & PCI_STATUS_CAP_LIST)) return 0; switch (dev->hdr_type & 0x7f) { case PCI_HEADER_TYPE_NORMAL: case PCI_HEADER_TYPE_BRIDGE: pos = PCI_CAPABILITY_LIST; break; case PCI_HEADER_TYPE_CARDBUS: pos = PCI_CB_CAPABILITY_LIST; break; default: return 0; } pos = pci_read_config8(dev, pos); while (reps-- && (pos >= 0x40)) { /* Loop through the linked list. */ int this_cap; pos &= ~3; this_cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID); printk(BIOS_SPEW, "Capability: type 0x%02x @ 0x%02x\n", this_cap, pos); if (this_cap == 0xff) break; if (!last && (this_cap == cap)) return pos; if (last == pos) last = 0; pos = pci_read_config8(dev, pos + PCI_CAP_LIST_NEXT); } return 0; } /** * Given a device, and a capability type, return the next matching * capability. Always start at the head of the list. * * @param dev Pointer to the device structure. * @param cap PCI_CAP_LIST_ID of the PCI capability we're looking for. * @return The next matching capability. */ unsigned pci_find_capability(device_t dev, unsigned cap) { return pci_find_next_capability(dev, cap, 0); } /** * Given a device and register, read the size of the BAR for that register. * * @param dev Pointer to the device structure. * @param index Address of the PCI configuration register. * @return TODO */ struct resource *pci_get_resource(struct device *dev, unsigned long index) { struct resource *resource; unsigned long value, attr; resource_t moving, limit; /* Initialize the resources to nothing. */ resource = new_resource(dev, index); /* Get the initial value. */ value = pci_read_config32(dev, index); /* See which bits move. */ moving = pci_moving_config32(dev, index); /* Initialize attr to the bits that do not move. */ attr = value & ~moving; /* If it is a 64bit resource look at the high half as well. */ if (((attr & PCI_BASE_ADDRESS_SPACE_IO) == 0) && ((attr & PCI_BASE_ADDRESS_MEM_LIMIT_MASK) == PCI_BASE_ADDRESS_MEM_LIMIT_64)) { /* Find the high bits that move. */ moving |= ((resource_t) pci_moving_config32(dev, index + 4)) << 32; } /* Find the resource constraints. * Start by finding the bits that move. From there: * - Size is the least significant bit of the bits that move. * - Limit is all of the bits that move plus all of the lower bits. * See PCI Spec 6.2.5.1. */ limit = 0; if (moving) { resource->size = 1; resource->align = resource->gran = 0; while (!(moving & resource->size)) { resource->size <<= 1; resource->align += 1; resource->gran += 1; } resource->limit = limit = moving | (resource->size - 1); } /* * Some broken hardware has read-only registers that do not * really size correctly. * * Example: the Acer M7229 has BARs 1-4 normally read-only, * so BAR1 at offset 0x10 reads 0x1f1. If you size that register * by writing 0xffffffff to it, it will read back as 0x1f1 -- which * is a violation of the spec. * * We catch this case and ignore it by observing which bits move. * * This also catches the common case of unimplemented registers * that always read back as 0. */ if (moving == 0) { if (value != 0) { printk(BIOS_DEBUG, "%s register %02lx(%08lx), " "read-only ignoring it\n", dev_path(dev), index, value); } resource->flags = 0; } else if (attr & PCI_BASE_ADDRESS_SPACE_IO) { /* An I/O mapped base address. */ attr &= PCI_BASE_ADDRESS_IO_ATTR_MASK; resource->flags |= IORESOURCE_IO; /* I don't want to deal with 32bit I/O resources. */ resource->limit = 0xffff; } else { /* A Memory mapped base address. */ attr &= PCI_BASE_ADDRESS_MEM_ATTR_MASK; resource->flags |= IORESOURCE_MEM; if (attr & PCI_BASE_ADDRESS_MEM_PREFETCH) resource->flags |= IORESOURCE_PREFETCH; attr &= PCI_BASE_ADDRESS_MEM_LIMIT_MASK; if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_32) { /* 32bit limit. */ resource->limit = 0xffffffffUL; } else if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_1M) { /* 1MB limit. */ resource->limit = 0x000fffffUL; } else if (attr == PCI_BASE_ADDRESS_MEM_LIMIT_64) { /* 64bit limit. */ resource->limit = 0xffffffffffffffffULL; resource->flags |= IORESOURCE_PCI64; } else { /* Invalid value. */ printk(BIOS_ERR, "Broken BAR with value %lx\n", attr); printk(BIOS_ERR, " on dev %s at index %02lx\n", dev_path(dev), index); resource->flags = 0; } } /* Don't let the limit exceed which bits can move. */ if (resource->limit > limit) resource->limit = limit; return resource; } /** * Given a device and an index, read the size of the BAR for that register. * * @param dev Pointer to the device structure. * @param index Address of the PCI configuration register. */ static void pci_get_rom_resource(struct device *dev, unsigned long index) { struct resource *resource; unsigned long value; resource_t moving; /* Initialize the resources to nothing. */ resource = new_resource(dev, index); /* Get the initial value. */ value = pci_read_config32(dev, index); /* See which bits move. */ moving = pci_moving_config32(dev, index); /* Clear the Enable bit. */ moving = moving & ~PCI_ROM_ADDRESS_ENABLE; /* Find the resource constraints. * Start by finding the bits that move. From there: * - Size is the least significant bit of the bits that move. * - Limit is all of the bits that move plus all of the lower bits. * See PCI Spec 6.2.5.1. */ if (moving) { resource->size = 1; resource->align = resource->gran = 0; while (!(moving & resource->size)) { resource->size <<= 1; resource->align += 1; resource->gran += 1; } resource->limit = moving | (resource->size - 1); resource->flags |= IORESOURCE_MEM | IORESOURCE_READONLY; } else { if (value != 0) { printk(BIOS_DEBUG, "%s register %02lx(%08lx), " "read-only ignoring it\n", dev_path(dev), index, value); } resource->flags = 0; } compact_resources(dev); } /** * Read the base address registers for a given device. * * @param dev Pointer to the dev structure. * @param howmany How many registers to read (6 for device, 2 for bridge). */ static void pci_read_bases(struct device *dev, unsigned int howmany) { unsigned long index; for (index = PCI_BASE_ADDRESS_0; (index < PCI_BASE_ADDRESS_0 + (howmany << 2));) { struct resource *resource; resource = pci_get_resource(dev, index); index += (resource->flags & IORESOURCE_PCI64) ? 8 : 4; } compact_resources(dev); } static void pci_record_bridge_resource(struct device *dev, resource_t moving, unsigned index, unsigned long type) { struct resource *resource; unsigned long gran; resource_t step; resource = NULL; if (!moving) return; /* Initialize the constraints on the current bus. */ resource = new_resource(dev, index); resource->size = 0; gran = 0; step = 1; while ((moving & step) == 0) { gran += 1; step <<= 1; } resource->gran = gran; resource->align = gran; resource->limit = moving | (step - 1); resource->flags = type | IORESOURCE_PCI_BRIDGE | IORESOURCE_BRIDGE; } static void pci_bridge_read_bases(struct device *dev) { resource_t moving_base, moving_limit, moving; /* See if the bridge I/O resources are implemented. */ moving_base = ((u32) pci_moving_config8(dev, PCI_IO_BASE)) << 8; moving_base |= ((u32) pci_moving_config16(dev, PCI_IO_BASE_UPPER16)) << 16; moving_limit = ((u32) pci_moving_config8(dev, PCI_IO_LIMIT)) << 8; moving_limit |= ((u32) pci_moving_config16(dev, PCI_IO_LIMIT_UPPER16)) << 16; moving = moving_base & moving_limit; /* Initialize the I/O space constraints on the current bus. */ pci_record_bridge_resource(dev, moving, PCI_IO_BASE, IORESOURCE_IO); /* See if the bridge prefmem resources are implemented. */ moving_base = ((resource_t) pci_moving_config16(dev, PCI_PREF_MEMORY_BASE)) << 16; moving_base |= ((resource_t) pci_moving_config32(dev, PCI_PREF_BASE_UPPER32)) << 32; moving_limit = ((resource_t) pci_moving_config16(dev, PCI_PREF_MEMORY_LIMIT)) << 16; moving_limit |= ((resource_t) pci_moving_config32(dev, PCI_PREF_LIMIT_UPPER32)) << 32; moving = moving_base & moving_limit; /* Initialize the prefetchable memory constraints on the current bus. */ pci_record_bridge_resource(dev, moving, PCI_PREF_MEMORY_BASE, IORESOURCE_MEM | IORESOURCE_PREFETCH); /* See if the bridge mem resources are implemented. */ moving_base = ((u32) pci_moving_config16(dev, PCI_MEMORY_BASE)) << 16; moving_limit = ((u32) pci_moving_config16(dev, PCI_MEMORY_LIMIT)) << 16; moving = moving_base & moving_limit; /* Initialize the memory resources on the current bus. */ pci_record_bridge_resource(dev, moving, PCI_MEMORY_BASE, IORESOURCE_MEM); compact_resources(dev); } void pci_dev_read_resources(struct device *dev) { pci_read_bases(dev, 6); pci_get_rom_resource(dev, PCI_ROM_ADDRESS); } void pci_bus_read_resources(struct device *dev) { pci_bridge_read_bases(dev); pci_read_bases(dev, 2); pci_get_rom_resource(dev, PCI_ROM_ADDRESS1); } void pci_domain_read_resources(struct device *dev) { struct resource *res; /* Initialize the system-wide I/O space constraints. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); res->limit = 0xffffUL; res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; /* Initialize the system-wide memory resources constraints. */ res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); res->limit = 0xffffffffULL; res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED; } static void pci_set_resource(struct device *dev, struct resource *resource) { resource_t base, end; /* Make certain the resource has actually been assigned a value. */ if (!(resource->flags & IORESOURCE_ASSIGNED)) { printk(BIOS_ERR, "ERROR: %s %02lx %s size: 0x%010llx not " "assigned\n", dev_path(dev), resource->index, resource_type(resource), resource->size); return; } /* If this resource is fixed don't worry about it. */ if (resource->flags & IORESOURCE_FIXED) return; /* If I have already stored this resource don't worry about it. */ if (resource->flags & IORESOURCE_STORED) return; /* If the resource is subtractive don't worry about it. */ if (resource->flags & IORESOURCE_SUBTRACTIVE) return; /* Only handle PCI memory and I/O resources for now. */ if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO))) return; /* Enable the resources in the command register. */ if (resource->size) { if (resource->flags & IORESOURCE_MEM) dev->command |= PCI_COMMAND_MEMORY; if (resource->flags & IORESOURCE_IO) dev->command |= PCI_COMMAND_IO; if (resource->flags & IORESOURCE_PCI_BRIDGE) dev->command |= PCI_COMMAND_MASTER; } /* Get the base address. */ base = resource->base; /* Get the end. */ end = resource_end(resource); /* Now store the resource. */ resource->flags |= IORESOURCE_STORED; /* * PCI bridges have no enable bit. They are disabled if the base of * the range is greater than the limit. If the size is zero, disable * by setting the base = limit and end = limit - 2^gran. */ if (resource->size == 0 && (resource->flags & IORESOURCE_PCI_BRIDGE)) { base = resource->limit; end = resource->limit - (1 << resource->gran); resource->base = base; } if (!(resource->flags & IORESOURCE_PCI_BRIDGE)) { unsigned long base_lo, base_hi; /* * Some chipsets allow us to set/clear the I/O bit * (e.g. VIA 82C686A). So set it to be safe. */ base_lo = base & 0xffffffff; base_hi = (base >> 32) & 0xffffffff; if (resource->flags & IORESOURCE_IO) base_lo |= PCI_BASE_ADDRESS_SPACE_IO; pci_write_config32(dev, resource->index, base_lo); if (resource->flags & IORESOURCE_PCI64) pci_write_config32(dev, resource->index + 4, base_hi); } else if (resource->index == PCI_IO_BASE) { /* Set the I/O ranges. */ pci_write_config8(dev, PCI_IO_BASE, base >> 8); pci_write_config16(dev, PCI_IO_BASE_UPPER16, base >> 16); pci_write_config8(dev, PCI_IO_LIMIT, end >> 8); pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, end >> 16); } else if (resource->index == PCI_MEMORY_BASE) { /* Set the memory range. */ pci_write_config16(dev, PCI_MEMORY_BASE, base >> 16); pci_write_config16(dev, PCI_MEMORY_LIMIT, end >> 16); } else if (resource->index == PCI_PREF_MEMORY_BASE) { /* Set the prefetchable memory range. */ pci_write_config16(dev, PCI_PREF_MEMORY_BASE, base >> 16); pci_write_config32(dev, PCI_PREF_BASE_UPPER32, base >> 32); pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, end >> 16); pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, end >> 32); } else { /* Don't let me think I stored the resource. */ resource->flags &= ~IORESOURCE_STORED; printk(BIOS_ERR, "ERROR: invalid resource->index %lx\n", resource->index); } report_resource_stored(dev, resource, ""); } void pci_dev_set_resources(struct device *dev) { struct resource *res; struct bus *bus; u8 line; for (res = dev->resource_list; res; res = res->next) pci_set_resource(dev, res); for (bus = dev->link_list; bus; bus = bus->next) { if (bus->children) assign_resources(bus); } /* Set a default latency timer. */ pci_write_config8(dev, PCI_LATENCY_TIMER, 0x40); /* Set a default secondary latency timer. */ if ((dev->hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) pci_write_config8(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* Zero the IRQ settings. */ line = pci_read_config8(dev, PCI_INTERRUPT_PIN); if (line) pci_write_config8(dev, PCI_INTERRUPT_LINE, 0); /* Set the cache line size, so far 64 bytes is good for everyone. */ pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 64 >> 2); } void pci_dev_enable_resources(struct device *dev) { const struct pci_operations *ops; u16 command; /* Set the subsystem vendor and device ID for mainboard devices. */ ops = ops_pci(dev); if (dev->on_mainboard && ops && ops->set_subsystem) { printk(BIOS_DEBUG, "%s subsystem <- %04x/%04x\n", dev_path(dev), dev->subsystem_vendor, dev->subsystem_device); ops->set_subsystem(dev, dev->subsystem_vendor, dev->subsystem_device); } command = pci_read_config16(dev, PCI_COMMAND); command |= dev->command; /* v3 has * command |= (PCI_COMMAND_PARITY + PCI_COMMAND_SERR); // Error check. */ printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command); pci_write_config16(dev, PCI_COMMAND, command); } void pci_bus_enable_resources(struct device *dev) { u16 ctrl; /* * Enable I/O in command register if there is VGA card * connected with (even it does not claim I/O resource). */ if (dev->link_list->bridge_ctrl & PCI_BRIDGE_CTL_VGA) dev->command |= PCI_COMMAND_IO; ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); ctrl |= dev->link_list->bridge_ctrl; ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* Error check. */ printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); pci_dev_enable_resources(dev); } void pci_bus_reset(struct bus *bus) { u16 ctl; ctl = pci_read_config16(bus->dev, PCI_BRIDGE_CONTROL); ctl |= PCI_BRIDGE_CTL_BUS_RESET; pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, ctl); mdelay(10); ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; pci_write_config16(bus->dev, PCI_BRIDGE_CONTROL, ctl); delay(1); } void pci_dev_set_subsystem(struct device *dev, unsigned vendor, unsigned device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } #if CONFIG_CHROMEOS int oprom_is_loaded = 0; #endif /** Default handler: only runs the relevant PCI BIOS. */ void pci_dev_init(struct device *dev) { #if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN struct rom_header *rom, *ram; if (CONFIG_PCI_ROM_RUN != 1 && /* Only execute VGA ROMs. */ ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)) return; if (CONFIG_VGA_ROM_RUN != 1 && /* Only execute non-VGA ROMs. */ ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA)) return; #if CONFIG_CHROMEOS /* In ChromeOS we want to boot blazingly fast. Therefore * we don't run (VGA) option ROMs, unless we have to print * something on the screen before the kernel is loaded. */ if (!developer_mode_enabled() && !recovery_mode_enabled() && !vboot_wants_oprom()) { printk(BIOS_DEBUG, "Not loading VGA Option ROM\n"); return; } #endif rom = pci_rom_probe(dev); if (rom == NULL) return; ram = pci_rom_load(dev, rom); if (ram == NULL) return; #if CONFIG_HAVE_ACPI_RESUME && !CONFIG_S3_VGA_ROM_RUN /* If S3_VGA_ROM_RUN is disabled, skip running VGA option * ROMs when coming out of an S3 resume. */ if ((acpi_slp_type == 3) && ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA)) return; #endif run_bios(dev, (unsigned long)ram); #if CONFIG_CHROMEOS oprom_is_loaded = 1; printk(BIOS_DEBUG, "VGA Option ROM has been loaded\n"); #endif #endif /* CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN */ } /** Default device operation for PCI devices */ static struct pci_operations pci_dev_ops_pci = { .set_subsystem = pci_dev_set_subsystem, }; struct device_operations default_pci_ops_dev = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = pci_dev_init, .scan_bus = 0, .enable = 0, .ops_pci = &pci_dev_ops_pci, }; /** Default device operations for PCI bridges */ static struct pci_operations pci_bus_ops_pci = { .set_subsystem = 0, }; struct device_operations default_pci_ops_bus = { .read_resources = pci_bus_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_bus_enable_resources, .init = 0, .scan_bus = pci_scan_bridge, .enable = 0, .reset_bus = pci_bus_reset, .ops_pci = &pci_bus_ops_pci, }; /** * Detect the type of downstream bridge. * * This function is a heuristic to detect which type of bus is downstream * of a PCI-to-PCI bridge. This functions by looking for various capability * blocks to figure out the type of downstream bridge. PCI-X, PCI-E, and * Hypertransport all seem to have appropriate capabilities. * * When only a PCI-Express capability is found the type is examined to see * which type of bridge we have. * * @param dev Pointer to the device structure of the bridge. * @return Appropriate bridge operations. */ static struct device_operations *get_pci_bridge_ops(device_t dev) { unsigned int pos; #if CONFIG_PCIX_PLUGIN_SUPPORT pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pos) { printk(BIOS_DEBUG, "%s subordinate bus PCI-X\n", dev_path(dev)); return &default_pcix_ops_bus; } #endif #if CONFIG_AGP_PLUGIN_SUPPORT /* How do I detect a PCI to AGP bridge? */ #endif #if CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT pos = 0; while ((pos = pci_find_next_capability(dev, PCI_CAP_ID_HT, pos))) { u16 flags; flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); if ((flags >> 13) == 1) { /* Host or Secondary Interface */ printk(BIOS_DEBUG, "%s subordinate bus HT\n", dev_path(dev)); return &default_ht_ops_bus; } } #endif #if CONFIG_PCIEXP_PLUGIN_SUPPORT pos = pci_find_capability(dev, PCI_CAP_ID_PCIE); if (pos) { u16 flags; flags = pci_read_config16(dev, pos + PCI_EXP_FLAGS); switch ((flags & PCI_EXP_FLAGS_TYPE) >> 4) { case PCI_EXP_TYPE_ROOT_PORT: case PCI_EXP_TYPE_UPSTREAM: case PCI_EXP_TYPE_DOWNSTREAM: printk(BIOS_DEBUG, "%s subordinate bus PCI Express\n", dev_path(dev)); return &default_pciexp_ops_bus; case PCI_EXP_TYPE_PCI_BRIDGE: printk(BIOS_DEBUG, "%s subordinate PCI\n", dev_path(dev)); return &default_pci_ops_bus; default: break; } } #endif return &default_pci_ops_bus; } /** * Check if a device id matches a PCI driver entry. * * The driver entry can either point at a zero terminated array of acceptable * device IDs, or include a single device ID. * * @driver pointer to the PCI driver entry being checked * @device_id PCI device ID of the device being matched */ static int device_id_match(struct pci_driver *driver, unsigned short device_id) { if (driver->devices) { unsigned short check_id; const unsigned short *device_list = driver->devices; while ((check_id = *device_list++) != 0) if (check_id == device_id) return 1; } return (driver->device == device_id); } /** * Set up PCI device operation. * * Check if it already has a driver. If not, use find_device_operations(), * or set to a default based on type. * * @param dev Pointer to the device whose pci_ops you want to set. * @see pci_drivers */ static void set_pci_ops(struct device *dev) { struct pci_driver *driver; if (dev->ops) return; /* * Look through the list of setup drivers and find one for * this PCI device. */ for (driver = &pci_drivers[0]; driver != &epci_drivers[0]; driver++) { if ((driver->vendor == dev->vendor) && device_id_match(driver, dev->device)) { dev->ops = (struct device_operations *)driver->ops; printk(BIOS_SPEW, "%s [%04x/%04x] %sops\n", dev_path(dev), driver->vendor, driver->device, (driver->ops->scan_bus ? "bus " : "")); return; } } /* If I don't have a specific driver use the default operations. */ switch (dev->hdr_type & 0x7f) { /* Header type */ case PCI_HEADER_TYPE_NORMAL: if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) goto bad; dev->ops = &default_pci_ops_dev; break; case PCI_HEADER_TYPE_BRIDGE: if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) goto bad; dev->ops = get_pci_bridge_ops(dev); break; #if CONFIG_CARDBUS_PLUGIN_SUPPORT case PCI_HEADER_TYPE_CARDBUS: dev->ops = &default_cardbus_ops_bus; break; #endif default: bad: if (dev->enabled) { printk(BIOS_ERR, "%s [%04x/%04x/%06x] has unknown " "header type %02x, ignoring.\n", dev_path(dev), dev->vendor, dev->device, dev->class >> 8, dev->hdr_type); } } } /** * See if we have already allocated a device structure for a given devfn. * * Given a linked list of PCI device structures and a devfn number, find the * device structure correspond to the devfn, if present. This function also * removes the device structure from the linked list. * * @param list The device structure list. * @param devfn A device/function number. * @return Pointer to the device structure found or NULL if we have not * allocated a device for this devfn yet. */ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn) { struct device *dev; dev = 0; for (; *list; list = &(*list)->sibling) { if ((*list)->path.type != DEVICE_PATH_PCI) { printk(BIOS_ERR, "child %s not a PCI device\n", dev_path(*list)); continue; } if ((*list)->path.pci.devfn == devfn) { /* Unlink from the list. */ dev = *list; *list = (*list)->sibling; dev->sibling = NULL; break; } } /* * Just like alloc_dev() add the device to the list of devices on the * bus. When the list of devices was formed we removed all of the * parents children, and now we are interleaving static and dynamic * devices in order on the bus. */ if (dev) { struct device *child; /* Find the last child of our parent. */ for (child = dev->bus->children; child && child->sibling;) child = child->sibling; /* Place the device on the list of children of its parent. */ if (child) child->sibling = dev; else dev->bus->children = dev; } return dev; } /** * Scan a PCI bus. * * Determine the existence of a given PCI device. Allocate a new struct device * if dev==NULL was passed in and the device exists in hardware. * * @param dev Pointer to the dev structure. * @param bus Pointer to the bus structure. * @param devfn A device/function number to look at. * @return The device structure for the device (if found), NULL otherwise. */ device_t pci_probe_dev(device_t dev, struct bus *bus, unsigned devfn) { u32 id, class; u8 hdr_type; /* Detect if a device is present. */ if (!dev) { struct device dummy; dummy.bus = bus; dummy.path.type = DEVICE_PATH_PCI; dummy.path.pci.devfn = devfn; id = pci_read_config32(&dummy, PCI_VENDOR_ID); /* * Have we found something? Some broken boards return 0 if a * slot is empty, but the expected answer is 0xffffffff. */ if (id == 0xffffffff) return NULL; if ((id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { printk(BIOS_SPEW, "%s, bad id 0x%x\n", dev_path(&dummy), id); return NULL; } dev = alloc_dev(bus, &dummy.path); } else { /* * Enable/disable the device. Once we have found the device- * specific operations this operations we will disable the * device with those as well. * * This is geared toward devices that have subfunctions * that do not show up by default. * * If a device is a stuff option on the motherboard * it may be absent and enable_dev() must cope. */ /* Run the magic enable sequence for the device. */ if (dev->chip_ops && dev->chip_ops->enable_dev) dev->chip_ops->enable_dev(dev); /* Now read the vendor and device ID. */ id = pci_read_config32(dev, PCI_VENDOR_ID); /* * If the device does not have a PCI ID disable it. Possibly * this is because we have already disabled the device. But * this also handles optional devices that may not always * show up. */ /* If the chain is fully enumerated quit */ if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { if (dev->enabled) { printk(BIOS_INFO, "PCI: Static device %s not " "found, disabling it.\n", dev_path(dev)); dev->enabled = 0; } return dev; } } /* Read the rest of the PCI configuration information. */ hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE); class = pci_read_config32(dev, PCI_CLASS_REVISION); /* Store the interesting information in the device structure. */ dev->vendor = id & 0xffff; dev->device = (id >> 16) & 0xffff; dev->hdr_type = hdr_type; /* Class code, the upper 3 bytes of PCI_CLASS_REVISION. */ dev->class = class >> 8; /* Architectural/System devices always need to be bus masters. */ if ((dev->class >> 16) == PCI_BASE_CLASS_SYSTEM) dev->command |= PCI_COMMAND_MASTER; /* * Look at the vendor and device ID, or at least the header type and * class and figure out which set of configuration methods to use. * Unless we already have some PCI ops. */ set_pci_ops(dev); /* Now run the magic enable/disable sequence for the device. */ if (dev->ops && dev->ops->enable) dev->ops->enable(dev); /* Display the device. */ printk(BIOS_DEBUG, "%s [%04x/%04x] %s%s\n", dev_path(dev), dev->vendor, dev->device, dev->enabled ? "enabled" : "disabled", dev->ops ? "" : " No operations"); return dev; } /** * Scan a PCI bus. * * Determine the existence of devices and bridges on a PCI bus. If there are * bridges on the bus, recursively scan the buses behind the bridges. * * This function is the default scan_bus() method for the root device * 'dev_root'. * * @param bus Pointer to the bus structure. * @param min_devfn Minimum devfn to look at in the scan, usually 0x00. * @param max_devfn Maximum devfn to look at in the scan, usually 0xff. * @param max Current bus number. * @return The maximum bus number found, after scanning all subordinate busses. */ unsigned int pci_scan_bus(struct bus *bus, unsigned min_devfn, unsigned max_devfn, unsigned int max) { unsigned int devfn; struct device *old_devices; struct device *child; #if CONFIG_PCI_BUS_SEGN_BITS printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %04x:%02x\n", bus->secondary >> 8, bus->secondary & 0xff); #else printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %02x\n", bus->secondary); #endif /* Maximum sane devfn is 0xFF. */ if (max_devfn > 0xff) { printk(BIOS_ERR, "PCI: pci_scan_bus limits devfn %x - " "devfn %x\n", min_devfn, max_devfn); printk(BIOS_ERR, "PCI: pci_scan_bus upper limit too big. " "Using 0xff.\n"); max_devfn=0xff; } old_devices = bus->children; bus->children = NULL; post_code(0x24); /* * Probe all devices/functions on this bus with some optimization for * non-existence and single function devices. */ for (devfn = min_devfn; devfn <= max_devfn; devfn++) { struct device *dev; /* First thing setup the device structure. */ dev = pci_scan_get_dev(&old_devices, devfn); /* See if a device is present and setup the device structure. */ dev = pci_probe_dev(dev, bus, devfn); /* * If this is not a multi function device, or the device is * not present don't waste time probing another function. * Skip to next device. */ if ((PCI_FUNC(devfn) == 0x00) && (!dev || (dev->enabled && ((dev->hdr_type & 0x80) != 0x80)))) { devfn += 0x07; } } post_code(0x25); /* * Warn if any leftover static devices are are found. * There's probably a problem in devicetree.cb. */ if (old_devices) { device_t left; printk(BIOS_WARNING, "PCI: Left over static devices:\n"); for (left = old_devices; left; left = left->sibling) printk(BIOS_WARNING, "%s\n", dev_path(left)); printk(BIOS_WARNING, "PCI: Check your devicetree.cb.\n"); } /* * For all children that implement scan_bus() (i.e. bridges) * scan the bus behind that child. */ for (child = bus->children; child; child = child->sibling) max = scan_bus(child, max); /* * We've scanned the bus and so we know all about what's on the other * side of any bridges that may be on this bus plus any devices. * Return how far we've got finding sub-buses. */ printk(BIOS_DEBUG, "PCI: pci_scan_bus returning with max=%03x\n", max); post_code(0x55); return max; } /** * Scan a PCI bridge and the buses behind the bridge. * * Determine the existence of buses behind the bridge. Set up the bridge * according to the result of the scan. * * This function is the default scan_bus() method for PCI bridge devices. * * @param dev Pointer to the bridge device. * @param max The highest bus number assigned up to now. * @param do_scan_bus TODO * @return The maximum bus number found, after scanning all subordinate buses. */ unsigned int do_pci_scan_bridge(struct device *dev, unsigned int max, unsigned int (*do_scan_bus) (struct bus * bus, unsigned min_devfn, unsigned max_devfn, unsigned int max)) { struct bus *bus; u32 buses; u16 cr; printk(BIOS_SPEW, "%s for %s\n", __func__, dev_path(dev)); if (dev->link_list == NULL) { struct bus *link; link = malloc(sizeof(*link)); if (link == NULL) die("Couldn't allocate a link!\n"); memset(link, 0, sizeof(*link)); link->dev = dev; dev->link_list = link; } bus = dev->link_list; /* * Set up the primary, secondary and subordinate bus numbers. We have * no idea how many buses are behind this bridge yet, so we set the * subordinate bus number to 0xff for the moment. */ bus->secondary = ++max; bus->subordinate = 0xff; /* Clear all status bits and turn off memory, I/O and master enables. */ cr = pci_read_config16(dev, PCI_COMMAND); pci_write_config16(dev, PCI_COMMAND, 0x0000); pci_write_config16(dev, PCI_STATUS, 0xffff); /* * Read the existing primary/secondary/subordinate bus * number configuration. */ buses = pci_read_config32(dev, PCI_PRIMARY_BUS); /* * Configure the bus numbers for this bridge: the configuration * transactions will not be propagated by the bridge if it is not * correctly configured. */ buses &= 0xff000000; buses |= (((unsigned int)(dev->bus->secondary) << 0) | ((unsigned int)(bus->secondary) << 8) | ((unsigned int)(bus->subordinate) << 16)); pci_write_config32(dev, PCI_PRIMARY_BUS, buses); /* Now we can scan all subordinate buses (those behind the bridge). */ max = do_scan_bus(bus, 0x00, 0xff, max); /* * We know the number of buses behind this bridge. Set the subordinate * bus number to its real value. */ bus->subordinate = max; buses = (buses & 0xff00ffff) | ((unsigned int)(bus->subordinate) << 16); pci_write_config32(dev, PCI_PRIMARY_BUS, buses); pci_write_config16(dev, PCI_COMMAND, cr); printk(BIOS_SPEW, "%s returns max %d\n", __func__, max); return max; } /** * Scan a PCI bridge and the buses behind the bridge. * * Determine the existence of buses behind the bridge. Set up the bridge * according to the result of the scan. * * This function is the default scan_bus() method for PCI bridge devices. * * @param dev Pointer to the bridge device. * @param max The highest bus number assigned up to now. * @return The maximum bus number found, after scanning all subordinate buses. */ unsigned int pci_scan_bridge(struct device *dev, unsigned int max) { return do_pci_scan_bridge(dev, max, pci_scan_bus); } /** * Scan a PCI domain. * * This function is the default scan_bus() method for PCI domains. * * @param dev Pointer to the domain. * @param max The highest bus number assigned up to now. * @return The maximum bus number found, after scanning all subordinate busses. */ unsigned int pci_domain_scan_bus(device_t dev, unsigned int max) { max = pci_scan_bus(dev->link_list, PCI_DEVFN(0, 0), 0xff, max); return max; } #if CONFIG_PC80_SYSTEM /** * Assign IRQ numbers. * * This function assigns IRQs for all functions contained within the indicated * device address. If the device does not exist or does not require interrupts * then this function has no effect. * * This function should be called for each PCI slot in your system. * * @param bus Pointer to the bus structure. * @param slot TODO * @param pIntAtoD An array of IRQ #s that are assigned to PINTA through PINTD * of this slot. The particular IRQ #s that are passed in depend on the * routing inside your southbridge and on your board. */ void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]) { unsigned int funct; device_t pdev; u8 line, irq; /* Each slot may contain up to eight functions. */ for (funct = 0; funct < 8; funct++) { pdev = dev_find_slot(bus, (slot << 3) + funct); if (!pdev) continue; line = pci_read_config8(pdev, PCI_INTERRUPT_PIN); /* PCI spec says all values except 1..4 are reserved. */ if ((line < 1) || (line > 4)) continue; irq = pIntAtoD[line - 1]; printk(BIOS_DEBUG, "Assigning IRQ %d to %d:%x.%d\n", irq, bus, slot, funct); pci_write_config8(pdev, PCI_INTERRUPT_LINE, pIntAtoD[line - 1]); #ifdef PARANOID_IRQ_ASSIGNMENTS irq = pci_read_config8(pdev, PCI_INTERRUPT_LINE); printk(BIOS_DEBUG, " Readback = %d\n", irq); #endif #if CONFIG_PC80_SYSTEM /* Change to level triggered. */ i8259_configure_irq_trigger(pIntAtoD[line - 1], IRQ_LEVEL_TRIGGERED); #endif } } #endif