/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include int azalia_set_bits(void *port, u32 mask, u32 val) { u32 reg32; int count; /* Write (val & mask) to port */ val &= mask; reg32 = read32(port); reg32 &= ~mask; reg32 |= val; write32(port, reg32); /* Wait for readback of register to match what was just written to it */ count = 50; do { /* Wait 1ms based on BKDG wait time */ mdelay(1); reg32 = read32(port); reg32 &= mask; } while ((reg32 != val) && --count); /* Timeout occurred */ if (!count) return -1; return 0; } int azalia_enter_reset(u8 *base) { /* Set bit 0 to 0 to enter reset state (BAR + 0x8)[0] */ return azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0); } int azalia_exit_reset(u8 *base) { /* Set bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ return azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST); } static int codec_detect(u8 *base) { u32 reg32; int count; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ if (azalia_set_bits(base + HDA_GCTL_REG, 1, HDA_GCTL_CRST) < 0) goto no_codec; /* clear STATESTS bits (BAR + 0xe)[2:0] */ reg32 = read32(base + HDA_STATESTS_REG); reg32 |= 7; write32(base + HDA_STATESTS_REG, reg32); /* Wait for readback of register to * match what was just written to it */ count = 50; do { /* Wait 1ms based on BKDG wait time */ mdelay(1); reg32 = read32(base + HDA_STATESTS_REG); } while ((reg32 != 0) && --count); /* Timeout occurred */ if (!count) goto no_codec; /* Set Bit 0 to 0 to enter reset state (BAR + 0x8)[0] */ if (azalia_set_bits(base + HDA_GCTL_REG, 1, 0) < 0) goto no_codec; /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ if (azalia_set_bits(base + HDA_GCTL_REG, 1, HDA_GCTL_CRST) < 0) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0] */ reg32 = read32(base + HDA_STATESTS_REG); reg32 &= 0x0f; if (!reg32) goto no_codec; return reg32; no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ azalia_set_bits(base + HDA_GCTL_REG, 1, 0); printk(BIOS_DEBUG, "azalia_audio: No codec!\n"); return 0; } /* * Find a specific entry within a verb table * * @param verb_table: verb table data * @param verb_table_bytes: verb table size in bytes * @param viddid: vendor/device to search for * @param verb: pointer to entry within table * * Returns size of the entry within the verb table, * Returns 0 if the entry is not found * * The HDA verb table is composed of dwords. A set of 4 dwords is * grouped together to form a "jack" descriptor. * Bits 31:28 - Codec Address * Bits 27:20 - NID * Bits 19:8 - Verb ID * Bits 7:0 - Payload * * coreboot groups different codec verb tables into a single table * and prefixes each with a specific header consisting of 3 * dword entries: * 1 - Codec Vendor/Device ID * 2 - Subsystem ID * 3 - Number of jacks (groups of 4 dwords) for this codec */ u32 azalia_find_verb(const u32 *verb_table, u32 verb_table_bytes, u32 viddid, const u32 **verb) { int idx = 0; while (idx < (verb_table_bytes / sizeof(u32))) { /* Header contains the number of jacks, aka groups of 4 dwords */ u32 verb_size = 4 * verb_table[idx + 2]; if (verb_table[idx] != viddid) { idx += verb_size + 3; // skip verb + header continue; } *verb = &verb_table[idx + 3]; return verb_size; } /* Not all codecs need to load another verb */ return 0; } /* * Wait 50usec for the codec to indicate it is ready. * No response would imply that the codec is non-operative. */ static int wait_for_ready(u8 *base) { /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 50; while (timeout--) { u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); } return -1; } /* * Wait 50usec for the codec to indicate that it accepted the previous command. * No response would imply that the code is non-operative. */ static int wait_for_valid(u8 *base) { u32 reg32; /* Use a 50 usec timeout - the Linux kernel uses the same duration */ int timeout = 25; /* Send the verb to the codec */ reg32 = read32(base + HDA_ICII_REG); reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; write32(base + HDA_ICII_REG, reg32); while (timeout--) { udelay(1); } timeout = 50; while (timeout--) { reg32 = read32(base + HDA_ICII_REG); if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; udelay(1); } return -1; } static void codec_init(struct device *dev, u8 *base, int addr) { u32 reg32; const u32 *verb; u32 verb_size; int i; printk(BIOS_DEBUG, "azalia_audio: Initializing codec #%d\n", addr); /* 1 */ if (wait_for_ready(base) < 0) { printk(BIOS_DEBUG, " codec not ready.\n"); return; } reg32 = (addr << 28) | 0x000f0000; write32(base + HDA_IC_REG, reg32); if (wait_for_valid(base) < 0) { printk(BIOS_DEBUG, " codec not valid.\n"); return; } /* 2 */ reg32 = read32(base + HDA_IR_REG); printk(BIOS_DEBUG, "azalia_audio: codec viddid: %08x\n", reg32); verb_size = azalia_find_verb(cim_verb_data, cim_verb_data_size, reg32, &verb); if (!verb_size) { printk(BIOS_DEBUG, "azalia_audio: No verb!\n"); return; } printk(BIOS_DEBUG, "azalia_audio: verb_size: %d\n", verb_size); /* 3 */ for (i = 0; i < verb_size; i++) { if (wait_for_ready(base) < 0) return; write32(base + HDA_IC_REG, verb[i]); if (wait_for_valid(base) < 0) return; } printk(BIOS_DEBUG, "azalia_audio: verb loaded.\n"); } static void codecs_init(struct device *dev, u8 *base, u32 codec_mask) { int i; for (i = 2; i >= 0; i--) { if (codec_mask & (1 << i)) codec_init(dev, base, i); } } void azalia_audio_init(struct device *dev) { u8 *base; struct resource *res; u32 codec_mask; res = find_resource(dev, PCI_BASE_ADDRESS_0); if (!res) return; // NOTE this will break as soon as the azalia_audio get's a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "azalia_audio: base = %p\n", base); codec_mask = codec_detect(base); if (codec_mask) { printk(BIOS_DEBUG, "azalia_audio: codec_mask = %02x\n", codec_mask); codecs_init(dev, base, codec_mask); } } struct device_operations default_azalia_audio_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = azalia_audio_init, .ops_pci = &pci_dev_ops_pci, };