/* * This file is part of the coreboot project. * * Copyright (C) 2008 coresystems GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA */ /* * +--------------------------------+ * | SMM Handler C Code | * +--------------------------------+ 0x14000 * | SMM Handler Heap | * +--------------------------------+ 0x10000 * | Save State Map Node 0 | * | Save State Map Node 1 | * | Save State Map Node 2 | * | Save State Map Node 3 | * | ... | * +--------------------------------+ 0xf000 * | | * | | * | EARLY DATA (lock, vectors) | * +--------------------------------+ 0x8400 * | SMM Entry Node 0 (+ stack) | * +--------------------------------+ 0x8000 * | SMM Entry Node 1 (+ stack) | * | SMM Entry Node 2 (+ stack) | * | SMM Entry Node 3 (+ stack) | * | ... | * +--------------------------------+ 0x7400 * | | * | SMM Handler Assembly Stub | * | | * +--------------------------------+ TSEG * */ #define LAPIC_ID 0xfee00020 #define SMM_STACK_SIZE (0x400 - 0x10) /* Values for the xchg lock */ #define SMI_LOCKED 0 #define SMI_UNLOCKED 1 #define __PRE_RAM__ #if CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE #include #define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) #elif CONFIG_NORTHBRIDGE_INTEL_NEHALEM #include #define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) #elif CONFIG_NORTHBRIDGE_INTEL_HASWELL #include #define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) #else #error "Northbridge must define TSEG_BAR." #endif /* initially SMM is some sort of real mode. Let gcc know * how to treat the SMM handler stub */ .section ".handler", "a", @progbits .code16 /** * SMM code to enable protected mode and jump to the * C-written function void smi_handler(u32 smm_revision) * * All the bad magic is not all that bad after all. */ smm_handler_start: movl $(TSEG_BAR), %eax /* Get TSEG base from PCIE */ addr32 movl (%eax), %edx /* Save TSEG_BAR in %edx */ andl $~1, %edx /* Remove lock bit */ /* Obtain lock */ movl %edx, %ebx addl $(smm_lock), %ebx movw $SMI_LOCKED, %ax addr32 xchg %ax, (%ebx) cmpw $SMI_UNLOCKED, %ax /* Proceed if we got the lock */ je smm_check_prot_vector /* If we did not get the lock, wait for release */ wait_for_unlock: pause addr32 movw (%ebx), %ax cmpw $SMI_LOCKED, %ax je wait_for_unlock rsm smm_check_prot_vector: /* See if we need to adjust protected vector */ movl %edx, %eax addl $(smm_prot_vector), %eax addr32 movl (%eax), %ebx cmpl $(smm_prot_start), %ebx jne smm_check_gdt_vector /* Adjust vector with TSEG offset */ addl %edx, %ebx addr32 movl %ebx, (%eax) smm_check_gdt_vector: /* See if we need to adjust GDT vector */ movl %edx, %eax addl $(smm_gdt_vector + 2), %eax addr32 movl (%eax), %ebx cmpl $(smm_gdt - smm_handler_start), %ebx jne smm_load_gdt /* Adjust vector with TSEG offset */ addl %edx, %ebx addr32 movl %ebx, (%eax) smm_load_gdt: movl $(smm_gdt_vector), %ebx addl %edx, %ebx /* TSEG base in %edx */ data32 lgdt (%ebx) movl %cr0, %eax andl $0x1FFAFFD1, %eax /* CD,NW,PG,AM,WP,NE,TS,EM,MP = 0 */ orl $0x1, %eax /* PE = 1 */ movl %eax, %cr0 /* Enable protected mode */ movl $(smm_prot_vector), %eax addl %edx, %eax data32 ljmp *(%eax) .code32 smm_prot_start: /* Use flat data segment */ movw $0x10, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss movw %ax, %fs movw %ax, %gs /* Get this CPU's LAPIC ID */ movl $LAPIC_ID, %esi movl (%esi), %ecx shr $24, %ecx /* calculate stack offset by multiplying the APIC ID * by 1024 (0x400), and save that offset in ebp. */ shl $10, %ecx movl %ecx, %ebp /* We put the stack for each core right above * its SMM entry point. Core 0 starts at SMM_BASE + 0x8000, * we spare 0x10 bytes for the jump to be sure. */ movl $0x8010, %eax /* core 0 address */ addl %edx, %eax /* addjust for TSEG */ subl %ecx, %eax /* subtract offset, see above */ movl %eax, %ebx /* Save bottom of stack in ebx */ /* clear stack */ cld movl %eax, %edi movl $(SMM_STACK_SIZE >> 2), %ecx xorl %eax, %eax rep stosl /* set new stack */ addl $SMM_STACK_SIZE, %ebx movl %ebx, %esp /* Get SMM revision */ movl $0xfefc, %ebx /* core 0 address */ addl %edx, %ebx /* addjust for TSEG */ subl %ebp, %ebx /* subtract core X offset */ movl (%ebx), %eax pushl %eax /* Call 32bit C handler */ call smi_handler /* Release lock */ movl $(TSEG_BAR), %eax /* Get TSEG base from PCIE */ movl (%eax), %ebx /* Save TSEG_BAR in %ebx */ andl $~1, %ebx /* Remove lock bit */ addl $(smm_lock), %ebx movw $SMI_UNLOCKED, %ax xchg %ax, (%ebx) /* To return, just do rsm. It will "clean up" protected mode */ rsm smm_gdt: /* The first GDT entry can not be used. Keep it zero */ .long 0x00000000, 0x00000000 /* gdt selector 0x08, flat code segment */ .word 0xffff, 0x0000 .byte 0x00, 0x9b, 0xcf, 0x00 /* G=1 and 0x0f, 4GB limit */ /* gdt selector 0x10, flat data segment */ .word 0xffff, 0x0000 .byte 0x00, 0x93, 0xcf, 0x00 smm_gdt_end: .section ".earlydata", "a", @progbits .code16 .align 4, 0xff smm_lock: .word SMI_UNLOCKED .align 4, 0xff smm_prot_vector: .long smm_prot_start .short 8 .align 4, 0xff smm_gdt_vector: .word smm_gdt_end - smm_gdt - 1 .long smm_gdt - smm_handler_start .section ".jumptable", "a", @progbits /* This is the SMM jump table. All cores use the same SMM handler * for simplicity. But SMM Entry needs to be different due to the * save state area. The jump table makes sure all CPUs jump into the * real handler on SMM entry. */ /* This code currently supports up to 16 CPU cores. If more than 16 CPU cores * shall be used, below table has to be updated, as well as smm_tseg.ld */ /* When using TSEG do a relative jump and fix up the CS later since we * do not know what our TSEG base is yet. */ .code16 jumptable: /* core 15 */ jmp smm_handler_start .align 1024, 0x00 /* core 14 */ jmp smm_handler_start .align 1024, 0x00 /* core 13 */ jmp smm_handler_start .align 1024, 0x00 /* core 12 */ jmp smm_handler_start .align 1024, 0x00 /* core 11 */ jmp smm_handler_start .align 1024, 0x00 /* core 10 */ jmp smm_handler_start .align 1024, 0x00 /* core 9 */ jmp smm_handler_start .align 1024, 0x00 /* core 8 */ jmp smm_handler_start .align 1024, 0x00 /* core 7 */ jmp smm_handler_start .align 1024, 0x00 /* core 6 */ jmp smm_handler_start .align 1024, 0x00 /* core 5 */ jmp smm_handler_start .align 1024, 0x00 /* core 4 */ jmp smm_handler_start .align 1024, 0x00 /* core 3 */ jmp smm_handler_start .align 1024, 0x00 /* core 2 */ jmp smm_handler_start .align 1024, 0x00 /* core 1 */ jmp smm_handler_start .align 1024, 0x00 /* core 0 */ jmp smm_handler_start .align 1024, 0x00