/* * This file is part of the coreboot project. * * Copyright (C) 2008 coresystems GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA */ #include #include #include #include #include void southbridge_smi_set_eos(void); #define DEBUG_SMI typedef enum { SMI_LOCKED, SMI_UNLOCKED } smi_semaphore; /* SMI multiprocessing semaphore */ static volatile smi_semaphore smi_handler_status = SMI_UNLOCKED; static int smi_obtain_lock(void) { u8 ret = SMI_LOCKED; asm volatile ( "movb %2, %%al\n" "xchgb %%al, %1\n" "movb %%al, %0\n" : "=g" (ret), "=m" (smi_handler_status) : "g" (SMI_LOCKED) : "eax" ); return (ret == SMI_UNLOCKED); } static void smi_release_lock(void) { asm volatile ( "movb %1, %%al\n" "xchgb %%al, %0\n" : "=m" (smi_handler_status) : "g" (SMI_UNLOCKED) : "eax" ); } #define LAPIC_ID 0xfee00020 static inline __attribute__((always_inline)) unsigned long nodeid(void) { return (*((volatile unsigned long *)(LAPIC_ID)) >> 24); } /* ********************* smi_util ************************* */ /* Data */ #define UART_RBR 0x00 #define UART_TBR 0x00 /* Control */ #define UART_IER 0x01 #define UART_IIR 0x02 #define UART_FCR 0x02 #define UART_LCR 0x03 #define UART_MCR 0x04 #define UART_DLL 0x00 #define UART_DLM 0x01 /* Status */ #define UART_LSR 0x05 #define UART_MSR 0x06 #define UART_SCR 0x07 static int uart_can_tx_byte(void) { return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20; } static void uart_wait_to_tx_byte(void) { while(!uart_can_tx_byte()) ; } static void uart_wait_until_sent(void) { while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40)) ; } static void uart_tx_byte(unsigned char data) { uart_wait_to_tx_byte(); outb(data, CONFIG_TTYS0_BASE + UART_TBR); /* Make certain the data clears the fifos */ uart_wait_until_sent(); } void console_tx_flush(void) { uart_wait_to_tx_byte(); } void console_tx_byte(unsigned char byte) { if (byte == '\n') uart_tx_byte('\r'); uart_tx_byte(byte); } /* ********************* smi_util ************************* */ void io_trap_handler(int smif) { /* If a handler function handled a given IO trap, it * shall return a non-zero value */ printk_debug("SMI function trap 0x%x: ", smif); if (southbridge_io_trap_handler(smif)) return; if (mainboard_io_trap_handler(smif)) return; printk_debug("Unknown function\n"); } /** * @brief Set the EOS bit */ static void smi_set_eos(void) { southbridge_smi_set_eos(); } /** * @brief Interrupt handler for SMI# * * @param smm_revision revision of the smm state save map */ void smi_handler(u32 smm_revision) { unsigned int node; smm_state_save_area_t state_save; /* Are we ok to execute the handler? */ if (!smi_obtain_lock()) return; node=nodeid(); #ifdef DEBUG_SMI console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL; #else console_loglevel = 1; #endif printk_spew("\nSMI# #%d\n", node); switch (smm_revision) { case 0x00030007: state_save.type = LEGACY; state_save.legacy_state_save = (legacy_smm_state_save_area_t *) (0xa8000 + 0x7e00 - (node * 0x400)); break; case 0x00030100: state_save.type = EM64T; state_save.em64t_state_save = (em64t_smm_state_save_area_t *) (0xa8000 + 0x7d00 - (node * 0x400)); break; case 0x00030064: state_save.type = AMD64; state_save.amd64_state_save = (amd64_smm_state_save_area_t *) (0xa8000 + 0x7e00 - (node * 0x400)); break; default: printk_debug("smm_revision: 0x%08x\n", smm_revision); printk_debug("SMI# not supported on your CPU\n"); /* Don't release lock, so no further SMI will happen, * if we don't handle it anyways. */ return; } /* Call chipset specific SMI handlers. This would be the place to * add a CPU or northbridge specific SMI handler, too */ southbridge_smi_handler(node, &state_save); smi_release_lock(); /* De-assert SMI# signal to allow another SMI */ smi_set_eos(); }