/* * This file is part of the coreboot project. * * Copyright (C) 2000,2007 Ronald G. Minnich * Copyright (C) 2005 Eswar Nallusamy, LANL * Copyright (C) 2005 Tyan * (Written by Yinghai Lu for Tyan) * Copyright (C) 2007 coresystems GmbH * (Written by Stefan Reinauer for coresystems GmbH) * Copyright (C) 2007,2008 Carl-Daniel Hailfinger * Copyright (C) 2008 VIA Technologies, Inc. * (Written by Jason Zhao for VIA) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ #include #include #include #define CacheSize CONFIG_DCACHE_RAM_SIZE #define CacheBase CONFIG_DCACHE_RAM_BASE /* Save the BIST result. */ movl %eax, %ebp CacheAsRam: /* Disable cache. */ movl %cr0, %eax orl $CR0_CacheDisable, %eax movl %eax, %cr0 invd /* Set the default memory type and enable fixed and variable MTRRs. */ movl $MTRR_DEF_TYPE_MSR, %ecx xorl %edx, %edx movl $(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN), %eax wrmsr /* Clear all MTRRs. */ xorl %edx, %edx movl $all_mtrr_msrs, %esi clear_fixed_var_mtrr: lodsl (%esi), %eax testl %eax, %eax jz clear_fixed_var_mtrr_out movl %eax, %ecx xorl %eax, %eax wrmsr jmp clear_fixed_var_mtrr all_mtrr_msrs: /* fixed MTRR MSRs */ .long MTRR_FIX_64K_00000 .long MTRR_FIX_16K_80000 .long MTRR_FIX_16K_A0000 .long MTRR_FIX_4K_C0000 .long MTRR_FIX_4K_C8000 .long MTRR_FIX_4K_D0000 .long MTRR_FIX_4K_D8000 .long MTRR_FIX_4K_E0000 .long MTRR_FIX_4K_E8000 .long MTRR_FIX_4K_F0000 .long MTRR_FIX_4K_F8000 /* var MTRR MSRs */ .long MTRR_PHYS_BASE(0) .long MTRR_PHYS_MASK(0) .long MTRR_PHYS_BASE(1) .long MTRR_PHYS_MASK(1) .long MTRR_PHYS_BASE(2) .long MTRR_PHYS_MASK(2) .long MTRR_PHYS_BASE(3) .long MTRR_PHYS_MASK(3) .long MTRR_PHYS_BASE(4) .long MTRR_PHYS_MASK(4) .long MTRR_PHYS_BASE(5) .long MTRR_PHYS_MASK(5) .long MTRR_PHYS_BASE(6) .long MTRR_PHYS_MASK(6) .long MTRR_PHYS_BASE(7) .long MTRR_PHYS_MASK(7) .long 0x000 /* NULL, end of table */ clear_fixed_var_mtrr_out: movl $MTRR_PHYS_BASE(0), %ecx xorl %edx, %edx movl $(CacheBase | MTRR_TYPE_WRBACK), %eax wrmsr movl $MTRR_PHYS_MASK(0), %ecx /* This assumes we never access addresses above 2^36 in CAR. */ movl $0x0000000f, %edx movl $(~(CacheSize - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr /* * Enable write base caching so we can do execute in place (XIP) * on the flash ROM. */ movl $MTRR_PHYS_BASE(1), %ecx xorl %edx, %edx /* * IMPORTANT: The following calculation _must_ be done at runtime. See * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html */ movl $copy_and_run, %eax andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax orl $MTRR_TYPE_WRBACK, %eax wrmsr movl $MTRR_PHYS_MASK(1), %ecx movl $0x0000000f, %edx movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr /* Set the default memory type and enable fixed and variable MTRRs. */ /* TODO: Or also enable fixed MTRRs? Bug in the code? */ movl $MTRR_DEF_TYPE_MSR, %ecx xorl %edx, %edx movl $(MTRR_DEF_TYPE_EN), %eax wrmsr /* Enable cache. */ movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax movl %eax, %cr0 /* Read the range with lodsl. */ cld movl $CacheBase, %esi movl %esi, %edi movl $(CacheSize >> 2), %ecx rep lodsl movl $CacheBase, %esi movl %esi, %edi movl $(CacheSize >> 2), %ecx /* * 0x5c5c5c5c is a memory test pattern. * TODO: Check if everything works with the zero pattern as well. */ /* xorl %eax, %eax */ xorl $0x5c5c5c5c, %eax rep stosl #ifdef CARTEST /* * IMPORTANT: The following calculation _must_ be done at runtime. See * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html */ movl $copy_and_run, %esi andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %ei movl %esi, %edi movl $(CONFIG_XIP_ROM_SIZE >> 2), %ecx rep lodsl #endif /* * The key point of this CAR code is C7 cache does not turn into * "no fill" mode, which is not compatible with general CAR code. */ movl $(CacheBase + CacheSize - 4), %eax movl %eax, %esp #ifdef CARTEST testok: post_code(0x40) xorl %edx, %edx xorl %eax, %eax movl $0x5c5c, %edx pushl %edx pushl %edx pushl %edx pushl %edx pushl %edx popl %esi popl %esi popl %eax popl %eax popl %eax cmpl %edx, %eax jne stackerr #endif /* Restore the BIST result. */ movl %ebp, %eax /* We need to set EBP? No need. */ movl %esp, %ebp pushl %eax /* BIST */ call main /* * TODO: Backup stack in CACHE_AS_RAM into MMX and SSE and after we * get STACK up, we restore that. It is only needed if we * want to go back. */ /* We don't need CAR from now on. */ /* Disable cache. */ movl %cr0, %eax orl $CR0_CacheDisable, %eax movl %eax, %cr0 /* Set the default memory type and enable variable MTRRs. */ /* TODO: Or also enable fixed MTRRs? Bug in the code? */ movl $MTRR_DEF_TYPE_MSR, %ecx xorl %edx, %edx movl $(MTRR_DEF_TYPE_EN), %eax wrmsr /* Enable caching for CONFIG_RAMBASE..CONFIG_RAMTOP. */ movl $MTRR_PHYS_BASE(0), %ecx xorl %edx, %edx movl $(CONFIG_RAMBASE | MTRR_TYPE_WRBACK), %eax wrmsr movl $MTRR_PHYS_MASK(0), %ecx movl $0x0000000f, %edx /* AMD 40 bit 0xff */ movl $(~(CONFIG_RAMTOP - CONFIG_RAMBASE - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr /* Cache XIP_ROM area to speedup coreboot code. */ movl $MTRR_PHYS_BASE(1), %ecx xorl %edx, %edx /* * IMPORTANT: The following calculation _must_ be done at runtime. See * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html */ movl $copy_and_run, %eax andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax orl $MTRR_TYPE_WRBACK, %eax wrmsr movl $MTRR_PHYS_MASK(1), %ecx xorl %edx, %edx movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax wrmsr /* Enable cache. */ movl %cr0, %eax andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax movl %eax, %cr0 invd __main: post_code(POST_PREPARE_RAMSTAGE) cld /* Clear direction flag. */ movl $CONFIG_RAMTOP, %esp movl %esp, %ebp call copy_and_run .Lhlt: post_code(POST_DEAD_CODE) hlt jmp .Lhlt