/* * This file is part of the coreboot project. * * Copyright 2013 Google Inc. * Copyright (C) 2012 Samsung Electronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include "dp.h" #include "fimd.h" #include "cpu.h" #include "clk.h" #include "usb.h" #include "chip.h" static unsigned int cpu_id; static unsigned int cpu_rev; /* Setting TZPC[TrustZone Protection Controller] * We pretty much disable it all, as the kernel * expects it that way -- and that's not the default. */ static void tzpc_init(void) { struct exynos_tzpc *tzpc; unsigned int addr; for (addr = TZPC10_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) { tzpc = (struct exynos_tzpc *)addr; if (addr == TZPC0_BASE) writel(R0SIZE, &tzpc->r0size); writel(DECPROTXSET, &tzpc->decprot0set); writel(DECPROTXSET, &tzpc->decprot1set); writel(DECPROTXSET, &tzpc->decprot2set); writel(DECPROTXSET, &tzpc->decprot3set); } } static void set_cpu_id(void) { u32 pro_id = (read32((void *)EXYNOS_PRO_ID) & 0x00FFF000) >> 12; switch (pro_id) { case 0x200: /* Exynos4210 EVT0 */ cpu_id = 0x4210; cpu_rev = 0; break; case 0x210: /* Exynos4210 EVT1 */ cpu_id = 0x4210; break; case 0x412: /* Exynos4412 */ cpu_id = 0x4412; break; case 0x520: /* Exynos5250 */ cpu_id = 0x5250; break; case 0x420: /* Exynos5420 */ cpu_id = 0x5420; break; } } /* we distinguish a display port device from a raw graphics device * because there are dramatic differences in startup depending on * graphics usage. To make startup fast and easier to understand and * debug we explicitly name this common case. The alternate approach, * involving lots of machine and callbacks, is hard to debug and * verify. */ static void exynos_displayport_init(device_t dev, u32 lcdbase, unsigned long fb_size) { struct cpu_samsung_exynos5420_config *conf = dev->chip_info; /* put these on the stack. If, at some point, we want to move * this code to a pre-ram stage, it will be much easier. */ struct exynos5_fimd_panel panel; memset(&panel, 0, sizeof(panel)); panel.is_dp = 1; /* Display I/F is eDP */ /* while it is true that we did a memset to zero, * we leave some 'set to zero' entries here to make * it clear what's going on. Graphics is confusing. */ panel.is_mipi = 0; panel.fixvclk = 0; panel.ivclk = 0; panel.clkval_f = conf->clkval_f; panel.upper_margin = conf->upper_margin; panel.lower_margin = conf->lower_margin; panel.vsync = conf->vsync; panel.left_margin = conf->left_margin; panel.right_margin = conf->right_margin; panel.hsync = conf->hsync; panel.xres = conf->xres; panel.yres = conf->yres; printk(BIOS_SPEW, "LCD framebuffer @%p\n", (void *)(lcdbase)); memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */ /* * We need to clean and invalidate the framebuffer region and disable * caching as well. We assume that our dcache <--> memory address * space is identity-mapped in 1MB chunks, so align accordingly. * * Note: We may want to do something clever to ensure the framebuffer * region is aligned such that we don't change dcache policy for other * stuff inadvertantly. */ uint32_t lower = ALIGN_DOWN(lcdbase, MiB); uint32_t upper = ALIGN_UP(lcdbase + fb_size, MiB); dcache_clean_invalidate_by_mva(lower, upper - lower); mmu_config_range(lower / MiB, (upper - lower) / MiB, DCACHE_OFF); mmio_resource(dev, 1, lcdbase/KiB, (fb_size + KiB - 1)/KiB); } static void cpu_enable(device_t dev) { unsigned long fb_size = FB_SIZE_KB * KiB; u32 lcdbase = get_fb_base_kb() * KiB; ram_resource(dev, 0, RAM_BASE_KB, RAM_SIZE_KB - FB_SIZE_KB); mmio_resource(dev, 1, lcdbase / KiB, (fb_size + KiB - 1) / KiB); exynos_displayport_init(dev, lcdbase, fb_size); set_cpu_id(); tzpc_init(); } static void cpu_init(device_t dev) { printk(BIOS_INFO, "CPU: S5P%X @ %ldMHz\n", cpu_id, get_arm_clk() / 1000000); usb_init(dev); } static void cpu_noop(device_t dev) { } static struct device_operations cpu_ops = { .read_resources = cpu_noop, .set_resources = cpu_noop, .enable_resources = cpu_enable, .init = cpu_init, .scan_bus = 0, }; static void enable_exynos5420_dev(device_t dev) { dev->ops = &cpu_ops; } struct chip_operations cpu_samsung_exynos5420_ops = { CHIP_NAME("CPU Samsung Exynos 5420") .enable_dev = enable_exynos5420_dev, }; void exynos5420_config_l2_cache(void) { uint32_t val; /* * Bit 9 - L2 tag RAM setup (1 cycle) * Bits 8:6 - L2 tag RAM latency (3 cycles) * Bit 5 - L2 data RAM setup (1 cycle) * Bits 2:0 - L2 data RAM latency (3 cycles) */ val = (1 << 9) | (0x2 << 6) | (1 << 5) | (0x2); write_l2ctlr(val); val = read_l2actlr(); /* L2ACTLR[3]: Disable clean/evict push to external */ val |= (1 << 3); /* L2ACTLR[7]: Enable hazard detect timeout for A15 */ val |= (1 << 7); /* L2ACTLR[27]: Prevents stopping the L2 logic clock */ val |= (1 << 27); write_l2actlr(val); /* Read the l2 control register to force things to take effect? */ val = read_l2ctlr(); }