config BOOTBLOCK_CPU_INIT
	string
	default "cpu/samsung/exynos5420/bootblock.c"
	help
	  CPU/SoC-specific bootblock code. This is useful if the
	  bootblock must load microcode or copy data from ROM before
	  searching for the bootblock.

config EXYNOS_ACE_SHA
	bool
	default n

# ROM image layout.
#
# 0x0000: vendor-provided BL1 (8k).
# 0x2000: variable length bootblock checksum header
# 0x2010: bootblock
#  0x2020-0x20A0: reserved for CBFS master header.
# 0xA000: Free for CBFS data.

config BOOTBLOCK_ROM_OFFSET
	hex
	default 0x2010

config CBFS_HEADER_ROM_OFFSET
	hex "offset of master CBFS header in ROM"
	default 0x2020

config CBFS_ROM_OFFSET
	# Calculated by BOOTBLOCK_ROM_OFFSET + max bootblock size.
	hex "offset of CBFS data in ROM"
	default 0x0A000


# Example SRAM/iRAM map for Exynos5420 platform:
#
# 0x0202_0000: vendor-provided BL1
# 0x0202_4400: variable length bootblock checksum header.
# 0x0202_4410: bootblock, assume up to 32KB in size
# 0x0203_0000: romstage, assume up to 128KB in size.
# 0x0207_4000: stack pointer

config BOOTBLOCK_BASE
	hex
	default 0x02024410

config ROMSTAGE_BASE
	hex
	default 0x02030000

config ROMSTAGE_SIZE
	hex
	default 0x10000

# Stack may reside in either IRAM or DRAM. We will define it to live
# at the top of IRAM for now.
#
# Stack grows downward, push operation stores register contents in
# consecutive memory locations ending just below SP
config STACK_TOP
	hex
	default 0x02074000

config STACK_BOTTOM
	hex
	default 0x02073000

config STACK_SIZE
	hex
	default 0x1000

# TODO We may probably move this to board-specific implementation files instead
# of KConfig values.
config CBFS_CACHE_ADDRESS
	hex "memory address to put CBFS cache data"
	default 0x02060000

config CBFS_CACHE_SIZE
	hex "size of CBFS cache data"
	default 0x000013000

# FIXME: other magic numbers that should probably go away
config XIP_ROM_SIZE
	hex
	default ROMSTAGE_SIZE

config SYS_SDRAM_BASE
	hex
	default 0x20000000

config SYS_TEXT_BASE
	hex
	default 0x23e00000

config COREBOOT_TABLES_SIZE
	hex
	default 0x4000000

choice CONSOLE_SERIAL_UART_CHOICES
	prompt "Serial Console UART"
	default CONSOLE_SERIAL_UART3
	depends on CONSOLE_SERIAL_UART

config CONSOLE_SERIAL_UART0
	bool "UART0"
	help
	  Serial console on UART0

config CONSOLE_SERIAL_UART1
	bool "UART1"
	help
	  Serial console on UART1

config CONSOLE_SERIAL_UART2
	bool "UART2"
	help
	  Serial console on UART2

config CONSOLE_SERIAL_UART3
	bool "UART3"
	help
	  Serial console on UART3

endchoice

config CONSOLE_SERIAL_UART_ADDRESS
	hex
	depends on CONSOLE_SERIAL_UART
	default 0x12c00000 if CONSOLE_SERIAL_UART0
	default 0x12c10000 if CONSOLE_SERIAL_UART1
	default 0x12c20000 if CONSOLE_SERIAL_UART2
	default 0x12c30000 if CONSOLE_SERIAL_UART3
	help
	  Map the UART names to the respective MMIO address.