/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Secure Digital (SD) Host Controller interface specific code */ #include "bouncebuf.h" #include #include #include #include #include #include #include #include "sdhci.h" #include "sd_mmc.h" #include "storage.h" #include #define DMA_AVAILABLE ((CONFIG(SDHCI_ADMA_IN_BOOTBLOCK) && ENV_BOOTBLOCK) \ || (CONFIG(SDHCI_ADMA_IN_VERSTAGE) && ENV_SEPARATE_VERSTAGE) \ || (CONFIG(SDHCI_ADMA_IN_ROMSTAGE) && ENV_SEPARATE_ROMSTAGE) \ || ENV_POSTCAR || ENV_RAMSTAGE) __weak void *dma_malloc(size_t length_in_bytes) { return malloc(length_in_bytes); } void sdhci_reset(struct sdhci_ctrlr *sdhci_ctrlr, u8 mask) { struct stopwatch sw; /* Wait max 100 ms */ stopwatch_init_msecs_expire(&sw, 100); sdhci_writeb(sdhci_ctrlr, mask, SDHCI_SOFTWARE_RESET); while (sdhci_readb(sdhci_ctrlr, SDHCI_SOFTWARE_RESET) & mask) { if (stopwatch_expired(&sw)) { sdhc_error("Reset 0x%x never completed.\n", (int)mask); return; } udelay(1000); } } void sdhci_cmd_done(struct sdhci_ctrlr *sdhci_ctrlr, struct mmc_command *cmd) { int i; if (cmd->resp_type & CARD_RSP_136) { /* CRC is stripped so we need to do some shifting. */ for (i = 0; i < 4; i++) { cmd->response[i] = sdhci_readl(sdhci_ctrlr, SDHCI_RESPONSE + (3-i)*4) << 8; if (i != 3) cmd->response[i] |= sdhci_readb(sdhci_ctrlr, SDHCI_RESPONSE + (3-i)*4-1); } sdhc_log_response(4, &cmd->response[0]); sdhc_trace("Response: 0x%08x.%08x.%08x.%08x\n", cmd->response[3], cmd->response[2], cmd->response[1], cmd->response[0]); } else { cmd->response[0] = sdhci_readl(sdhci_ctrlr, SDHCI_RESPONSE); sdhc_log_response(1, &cmd->response[0]); sdhc_trace("Response: 0x%08x\n", cmd->response[0]); } } static int sdhci_transfer_data(struct sdhci_ctrlr *sdhci_ctrlr, struct mmc_data *data, unsigned int start_addr) { uint32_t block_count; uint32_t *buffer; uint32_t *buffer_end; uint32_t ps; uint32_t ps_mask; uint32_t stat; struct stopwatch sw; block_count = 0; buffer = (uint32_t *)data->dest; ps_mask = (data->flags & DATA_FLAG_READ) ? SDHCI_DATA_AVAILABLE : SDHCI_SPACE_AVAILABLE; stopwatch_init_msecs_expire(&sw, 100); do { /* Stop transfers if there is an error */ stat = sdhci_readl(sdhci_ctrlr, SDHCI_INT_STATUS); sdhci_writel(sdhci_ctrlr, stat, SDHCI_INT_STATUS); if (stat & SDHCI_INT_ERROR) { sdhc_error("Error detected in status(0x%X)!\n", stat); return -1; } /* Determine if the buffer is ready to move data */ ps = sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE); if (!(ps & ps_mask)) { if (stopwatch_expired(&sw)) { sdhc_error("Transfer data timeout\n"); return -1; } udelay(1); continue; } /* Transfer a block of data */ buffer_end = &buffer[data->blocksize >> 2]; if (data->flags == DATA_FLAG_READ) while (buffer_end > buffer) *buffer++ = sdhci_readl(sdhci_ctrlr, SDHCI_BUFFER); else while (buffer_end > buffer) sdhci_writel(sdhci_ctrlr, *buffer++, SDHCI_BUFFER); if (++block_count >= data->blocks) break; } while (!(stat & SDHCI_INT_DATA_END)); return 0; } static int sdhci_send_command_bounced(struct sd_mmc_ctrlr *ctrlr, struct mmc_command *cmd, struct mmc_data *data, struct bounce_buffer *bbstate) { struct sdhci_ctrlr *sdhci_ctrlr = (struct sdhci_ctrlr *)ctrlr; u16 mode = 0; unsigned int stat = 0; int ret = 0; u32 mask, flags; unsigned int timeout, start_addr = 0; struct stopwatch sw; /* Wait max 1 s */ timeout = 1000; sdhci_writel(sdhci_ctrlr, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS); mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT; /* We shouldn't wait for data inhibit for stop commands, even though they might use busy signaling */ if (cmd->flags & CMD_FLAG_IGNORE_INHIBIT) mask &= ~SDHCI_DATA_INHIBIT; while (sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE) & mask) { if (timeout == 0) { sdhc_trace("Cmd: %2d, Arg: 0x%08x, not sent\n", cmd->cmdidx, cmd->cmdarg); sdhc_error("Controller never released inhibit bit(s), " "present state %#8.8x.\n", sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE)); return CARD_COMM_ERR; } timeout--; udelay(1000); } mask = SDHCI_INT_RESPONSE; if (!(cmd->resp_type & CARD_RSP_PRESENT)) flags = SDHCI_CMD_RESP_NONE; else if (cmd->resp_type & CARD_RSP_136) flags = SDHCI_CMD_RESP_LONG; else if (cmd->resp_type & CARD_RSP_BUSY) { flags = SDHCI_CMD_RESP_SHORT_BUSY; mask |= SDHCI_INT_DATA_END; } else flags = SDHCI_CMD_RESP_SHORT; if (cmd->resp_type & CARD_RSP_CRC) flags |= SDHCI_CMD_CRC; if (cmd->resp_type & CARD_RSP_OPCODE) flags |= SDHCI_CMD_INDEX; if (data) flags |= SDHCI_CMD_DATA; /* Set Transfer mode regarding to data flag */ if (data) { sdhci_writew(sdhci_ctrlr, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, data->blocksize), SDHCI_BLOCK_SIZE); if (data->flags == DATA_FLAG_READ) mode |= SDHCI_TRNS_READ; if (data->blocks > 1) mode |= SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12; sdhci_writew(sdhci_ctrlr, data->blocks, SDHCI_BLOCK_COUNT); if (DMA_AVAILABLE && (ctrlr->caps & DRVR_CAP_AUTO_CMD12) && (cmd->cmdidx != MMC_CMD_AUTO_TUNING_SEQUENCE)) { if (sdhci_setup_adma(sdhci_ctrlr, data)) return -1; mode |= SDHCI_TRNS_DMA; } sdhci_writew(sdhci_ctrlr, mode, SDHCI_TRANSFER_MODE); } sdhc_trace("Cmd: %2d, Arg: 0x%08x\n", cmd->cmdidx, cmd->cmdarg); sdhci_writel(sdhci_ctrlr, cmd->cmdarg, SDHCI_ARGUMENT); sdhci_writew(sdhci_ctrlr, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND); sdhc_log_command_issued(); if (DMA_AVAILABLE && (mode & SDHCI_TRNS_DMA)) return sdhci_complete_adma(sdhci_ctrlr, cmd); stopwatch_init_msecs_expire(&sw, 2550); do { stat = sdhci_readl(sdhci_ctrlr, SDHCI_INT_STATUS); if (stat & SDHCI_INT_ERROR) { sdhc_trace("Error - IntStatus: 0x%08x\n", stat); break; } if (stat & SDHCI_INT_DATA_AVAIL) { sdhci_writel(sdhci_ctrlr, stat, SDHCI_INT_STATUS); return 0; } /* Apply max timeout for R1b-type CMD defined in eMMC ext_csd except for erase ones */ if (stopwatch_expired(&sw)) { if (ctrlr->caps & DRVR_CAP_BROKEN_R1B) return 0; sdhc_error( "Timeout for status update! IntStatus: 0x%08x\n", stat); return CARD_TIMEOUT; } } while ((stat & mask) != mask); if ((stat & (SDHCI_INT_ERROR | mask)) == mask) { if (cmd->cmdidx) sdhci_cmd_done(sdhci_ctrlr, cmd); sdhci_writel(sdhci_ctrlr, mask, SDHCI_INT_STATUS); } else ret = -1; if (!ret && data) ret = sdhci_transfer_data(sdhci_ctrlr, data, start_addr); if (ctrlr->udelay_wait_after_cmd) udelay(ctrlr->udelay_wait_after_cmd); stat = sdhci_readl(sdhci_ctrlr, SDHCI_INT_STATUS); sdhci_writel(sdhci_ctrlr, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS); if (!ret) return 0; sdhci_reset(sdhci_ctrlr, SDHCI_RESET_CMD); sdhci_reset(sdhci_ctrlr, SDHCI_RESET_DATA); if (stat & SDHCI_INT_TIMEOUT) { sdhc_error("CMD%d timeout, IntStatus: 0x%08x\n", cmd->cmdidx, stat); return CARD_TIMEOUT; } sdhc_error("CMD%d failed, IntStatus: 0x%08x\n", cmd->cmdidx, stat); return CARD_COMM_ERR; } __weak void sdhc_log_command(struct mmc_command *cmd) { } __weak void sdhc_log_command_issued(void) { } __weak void sdhc_log_response(uint32_t entries, uint32_t *response) { } __weak void sdhc_log_ret(int ret) { } static void sdhci_led_control(struct sd_mmc_ctrlr *ctrlr, int on) { uint8_t host_ctrl; struct sdhci_ctrlr *sdhci_ctrlr = (struct sdhci_ctrlr *)ctrlr; host_ctrl = sdhci_readb(sdhci_ctrlr, SDHCI_HOST_CONTROL); host_ctrl &= ~SDHCI_CTRL_LED; if (on) host_ctrl |= SDHCI_CTRL_LED; sdhci_writeb(sdhci_ctrlr, host_ctrl, SDHCI_HOST_CONTROL); } static int sdhci_send_command(struct sd_mmc_ctrlr *ctrlr, struct mmc_command *cmd, struct mmc_data *data) { void *buf; unsigned int bbflags; size_t len; struct bounce_buffer *bbstate = NULL; struct bounce_buffer bbstate_val; int ret; sdhc_log_command(cmd); if (CONFIG(SDHCI_BOUNCE_BUFFER) && data) { if (data->flags & DATA_FLAG_READ) { buf = data->dest; bbflags = GEN_BB_WRITE; } else { buf = (void *)data->src; bbflags = GEN_BB_READ; } len = data->blocks * data->blocksize; /* * on some platform(like rk3399 etc) need to worry about * cache coherency, so check the buffer, if not dma * coherent, use bounce_buffer to do DMA management. */ if (!dma_coherent(buf)) { bbstate = &bbstate_val; if (bounce_buffer_start(bbstate, buf, len, bbflags)) { sdhc_error("Failed to get bounce buffer.\n"); return -1; } } } sdhci_led_control(ctrlr, 1); ret = sdhci_send_command_bounced(ctrlr, cmd, data, bbstate); sdhci_led_control(ctrlr, 0); sdhc_log_ret(ret); if (CONFIG(SDHCI_BOUNCE_BUFFER) && bbstate) bounce_buffer_stop(bbstate); return ret; } static int sdhci_set_clock(struct sdhci_ctrlr *sdhci_ctrlr, unsigned int clock) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; unsigned int actual, div, clk, timeout; /* Turn off the clock if requested */ actual = clock; if (actual == 0) { sdhci_writew(sdhci_ctrlr, 0, SDHCI_CLOCK_CONTROL); sdhc_debug("SDHCI bus clock: Off\n"); return 0; } /* Compute the divisor for the new clock frequency */ actual = MIN(actual, ctrlr->f_max); actual = MAX(actual, ctrlr->f_min); if (ctrlr->clock_base <= actual) div = 0; else { /* Version 3.00 divisors must be a multiple of 2. */ if ((ctrlr->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) { div = MIN(((ctrlr->clock_base + actual - 1) / actual), SDHCI_MAX_DIV_SPEC_300); actual = ctrlr->clock_base / div; div += 1; } else { /* Version 2.00 divisors must be a power of 2. */ for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) { if ((ctrlr->clock_base / div) <= actual) break; } actual = ctrlr->clock_base / div; } div >>= 1; } /* Set the new clock frequency */ if (actual != ctrlr->bus_hz) { /* Turn off the clock */ sdhci_writew(sdhci_ctrlr, 0, SDHCI_CLOCK_CONTROL); /* Set the new clock frequency */ clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) << SDHCI_DIVIDER_HI_SHIFT; clk |= SDHCI_CLOCK_INT_EN; sdhci_writew(sdhci_ctrlr, clk, SDHCI_CLOCK_CONTROL); /* Display the requested clock frequency */ sdhc_debug("SDHCI bus clock: %d.%03d MHz\n", actual / 1000000, (actual / 1000) % 1000); /* Wait max 20 ms */ timeout = 20; while (!((clk = sdhci_readw(sdhci_ctrlr, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { sdhc_error( "Internal clock never stabilised.\n"); return -1; } timeout--; udelay(1000); } clk |= SDHCI_CLOCK_CARD_EN; sdhci_writew(sdhci_ctrlr, clk, SDHCI_CLOCK_CONTROL); ctrlr->bus_hz = actual; } return 0; } static void sdhci_set_power(struct sdhci_ctrlr *sdhci_ctrlr, unsigned short power) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; u8 pwr = 0; u8 pwr_ctrl; const char *voltage; if (power != (unsigned short)-1) { switch (1 << power) { case MMC_VDD_165_195: voltage = "1.8"; pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: case MMC_VDD_30_31: voltage = "3.0"; pwr = SDHCI_POWER_300; break; case MMC_VDD_32_33: case MMC_VDD_33_34: voltage = "3.3"; pwr = SDHCI_POWER_330; break; } } /* Determine the power state */ pwr_ctrl = sdhci_readb(sdhci_ctrlr, SDHCI_POWER_CONTROL); if (pwr == 0) { if (pwr_ctrl & SDHCI_POWER_ON) sdhc_debug("SDHCI voltage: Off\n"); sdhci_writeb(sdhci_ctrlr, 0, SDHCI_POWER_CONTROL); return; } /* Determine if the power has changed */ if (pwr_ctrl != (pwr | SDHCI_POWER_ON)) { sdhc_debug("SDHCI voltage: %s Volts\n", voltage); /* Select the voltage */ if (ctrlr->caps & DRVR_CAP_NO_SIMULT_VDD_AND_POWER) sdhci_writeb(sdhci_ctrlr, pwr, SDHCI_POWER_CONTROL); /* Apply power to the SD/MMC device */ pwr |= SDHCI_POWER_ON; sdhci_writeb(sdhci_ctrlr, pwr, SDHCI_POWER_CONTROL); } } const u16 speed_driver_voltage[] = { 0, /* 0: BUS_TIMING_LEGACY */ 0, /* 1: BUS_TIMING_MMC_HS */ 0, /* 2: BUS_TIMING_SD_HS */ SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180, /* 3: BUS_TIMING_UHS_SDR12 */ SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180, /* 4: BUS_TIMING_UHS_SDR25 */ SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180, /* 5: BUS_TIMING_UHS_SDR50 */ /* 6: BUS_TIMING_UHS_SDR104 */ SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_DRV_TYPE_A | SDHCI_CTRL_VDD_180, SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180, /* 7: BUS_TIMING_UHS_DDR50 */ SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180, /* 8: BUS_TIMING_MMC_DDR52 */ /* 9: BUS_TIMING_MMC_HS200 */ SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_DRV_TYPE_A | SDHCI_CTRL_VDD_180, /* 10: BUS_TIMING_MMC_HS400 */ SDHCI_CTRL_HS400 | SDHCI_CTRL_DRV_TYPE_A | SDHCI_CTRL_VDD_180, /* 11: BUS_TIMING_MMC_HS400ES */ SDHCI_CTRL_HS400 | SDHCI_CTRL_DRV_TYPE_A | SDHCI_CTRL_VDD_180 }; static void sdhci_set_uhs_signaling(struct sdhci_ctrlr *sdhci_ctrlr, uint32_t timing) { u16 ctrl_2; /* Select bus speed mode, driver and VDD 1.8 volt support */ ctrl_2 = sdhci_readw(sdhci_ctrlr, SDHCI_HOST_CONTROL2); ctrl_2 &= ~(SDHCI_CTRL_UHS_MASK | SDHCI_CTRL_DRV_TYPE_MASK | SDHCI_CTRL_VDD_180); if (timing < ARRAY_SIZE(speed_driver_voltage)) ctrl_2 |= speed_driver_voltage[timing]; sdhci_writew(sdhci_ctrlr, ctrl_2, SDHCI_HOST_CONTROL2); } static void sdhci_set_ios(struct sd_mmc_ctrlr *ctrlr) { struct sdhci_ctrlr *sdhci_ctrlr = (struct sdhci_ctrlr *)ctrlr; u32 ctrl; u32 previous_ctrl; u32 bus_width; int version; /* Set the clock frequency */ if (ctrlr->bus_hz != ctrlr->request_hz) sdhci_set_clock(sdhci_ctrlr, ctrlr->request_hz); /* Switch to 1.8 volt for HS200 */ if (ctrlr->caps & DRVR_CAP_1V8_VDD) if (ctrlr->bus_hz == CLOCK_200MHZ) sdhci_set_power(sdhci_ctrlr, MMC_VDD_165_195_SHIFT); /* Determine the new bus width */ bus_width = 1; ctrl = sdhci_readb(sdhci_ctrlr, SDHCI_HOST_CONTROL); previous_ctrl = ctrl; ctrl &= ~SDHCI_CTRL_4BITBUS; version = ctrlr->version & SDHCI_SPEC_VER_MASK; if (version >= SDHCI_SPEC_300) ctrl &= ~SDHCI_CTRL_8BITBUS; if ((ctrlr->bus_width == 8) && (version >= SDHCI_SPEC_300)) { ctrl |= SDHCI_CTRL_8BITBUS; bus_width = 8; } else if (ctrlr->bus_width == 4) { ctrl |= SDHCI_CTRL_4BITBUS; bus_width = 4; } if (!(ctrlr->timing == BUS_TIMING_LEGACY) && !(ctrlr->caps & DRVR_CAP_NO_HISPD_BIT)) ctrl |= SDHCI_CTRL_HISPD; else ctrl &= ~SDHCI_CTRL_HISPD; sdhci_set_uhs_signaling(sdhci_ctrlr, ctrlr->timing); if (DMA_AVAILABLE) { if (ctrlr->caps & DRVR_CAP_AUTO_CMD12) { ctrl &= ~SDHCI_CTRL_DMA_MASK; if (ctrlr->caps & DRVR_CAP_DMA_64BIT) ctrl |= SDHCI_CTRL_ADMA64; else ctrl |= SDHCI_CTRL_ADMA32; } } /* Set the new bus width */ if (CONFIG(SDHC_DEBUG) && ((ctrl ^ previous_ctrl) & (SDHCI_CTRL_4BITBUS | ((version >= SDHCI_SPEC_300) ? SDHCI_CTRL_8BITBUS : 0)))) sdhc_debug("SDHCI bus width: %d bit%s\n", bus_width, (bus_width != 1) ? "s" : ""); sdhci_writeb(sdhci_ctrlr, ctrl, SDHCI_HOST_CONTROL); } static void sdhci_tuning_start(struct sd_mmc_ctrlr *ctrlr, int retune) { uint16_t host_ctrl2; struct sdhci_ctrlr *sdhci_ctrlr = (struct sdhci_ctrlr *)ctrlr; /* Start the bus tuning */ host_ctrl2 = sdhci_readw(sdhci_ctrlr, SDHCI_HOST_CONTROL2); host_ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; host_ctrl2 |= (retune ? SDHCI_CTRL_TUNED_CLK : 0) | SDHCI_CTRL_EXEC_TUNING; sdhci_writew(sdhci_ctrlr, host_ctrl2, SDHCI_HOST_CONTROL2); } static int sdhci_is_tuning_complete(struct sd_mmc_ctrlr *ctrlr, int *successful) { uint16_t host_ctrl2; struct sdhci_ctrlr *sdhci_ctrlr = (struct sdhci_ctrlr *)ctrlr; /* Determine if the bus tuning has completed */ host_ctrl2 = sdhci_readw(sdhci_ctrlr, SDHCI_HOST_CONTROL2); *successful = ((host_ctrl2 & SDHCI_CTRL_TUNED_CLK) != 0); return ((host_ctrl2 & SDHCI_CTRL_EXEC_TUNING) == 0); } /* Prepare SDHCI controller to be initialized */ static int sdhci_pre_init(struct sdhci_ctrlr *sdhci_ctrlr) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; unsigned int caps, caps_1; /* * If the device needs to do anything non-standard before * sdhci initialization, run it here. */ if (sdhci_ctrlr->attach) { int rv = sdhci_ctrlr->attach(sdhci_ctrlr); if (rv) return rv; } /* Get controller version and capabilities */ ctrlr->version = sdhci_readw(sdhci_ctrlr, SDHCI_HOST_VERSION) & 0xff; caps = sdhci_readl(sdhci_ctrlr, SDHCI_CAPABILITIES); caps_1 = sdhci_readl(sdhci_ctrlr, SDHCI_CAPABILITIES_1); /* Determine the supported voltages */ if (caps & SDHCI_CAN_VDD_330) ctrlr->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34; if (caps & SDHCI_CAN_VDD_300) ctrlr->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31; if (caps & SDHCI_CAN_VDD_180) ctrlr->voltages |= MMC_VDD_165_195; /* Get the controller's base clock frequency */ if ((ctrlr->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) ctrlr->clock_base = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else ctrlr->clock_base = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; ctrlr->clock_base *= 1000000; ctrlr->f_max = ctrlr->clock_base; /* Determine the controller's clock frequency range */ ctrlr->f_min = 0; if ((ctrlr->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) ctrlr->f_min = ctrlr->clock_base / SDHCI_MAX_DIV_SPEC_300; else ctrlr->f_min = ctrlr->clock_base / SDHCI_MAX_DIV_SPEC_200; /* Determine the controller's modes of operation */ ctrlr->caps |= DRVR_CAP_HS52 | DRVR_CAP_HS; if (ctrlr->clock_base >= CLOCK_200MHZ) { ctrlr->caps |= DRVR_CAP_HS200 | DRVR_CAP_HS200_TUNING; if (caps_1 & SDHCI_SUPPORT_HS400) ctrlr->caps |= DRVR_CAP_HS400 | DRVR_CAP_ENHANCED_STROBE; } /* Determine the bus widths the controller supports */ ctrlr->caps |= DRVR_CAP_4BIT; if (caps & SDHCI_CAN_DO_8BIT) ctrlr->caps |= DRVR_CAP_8BIT; /* Determine the controller's DMA support */ if (caps & SDHCI_CAN_DO_ADMA2) ctrlr->caps |= DRVR_CAP_AUTO_CMD12; if (DMA_AVAILABLE && (caps & SDHCI_CAN_64BIT)) ctrlr->caps |= DRVR_CAP_DMA_64BIT; /* Specify the modes that the driver stack supports */ ctrlr->caps |= DRVR_CAP_HC; /* Let the SOC adjust the configuration to handle controller quirks */ soc_sd_mmc_controller_quirks(&sdhci_ctrlr->sd_mmc_ctrlr); if (ctrlr->clock_base == 0) { sdhc_error("Hardware doesn't specify base clock frequency\n"); return -1; } if (!ctrlr->f_max) ctrlr->f_max = ctrlr->clock_base; /* Display the results */ sdhc_trace("0x%08x: ctrlr->caps\n", ctrlr->caps); sdhc_trace("%d.%03d MHz: ctrlr->clock_base\n", ctrlr->clock_base / 1000000, (ctrlr->clock_base / 1000) % 1000); sdhc_trace("%d.%03d MHz: ctrlr->f_max\n", ctrlr->f_max / 1000000, (ctrlr->f_max / 1000) % 1000); sdhc_trace("%d.%03d MHz: ctrlr->f_min\n", ctrlr->f_min / 1000000, (ctrlr->f_min / 1000) % 1000); sdhc_trace("0x%08x: ctrlr->voltages\n", ctrlr->voltages); sdhci_reset(sdhci_ctrlr, SDHCI_RESET_ALL); return 0; } __weak void soc_sd_mmc_controller_quirks(struct sd_mmc_ctrlr *ctrlr) { } static int sdhci_init(struct sdhci_ctrlr *sdhci_ctrlr) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; int rv; /* Only initialize the controller upon reset or card insertion */ if (ctrlr->initialized) return 0; sdhc_debug("SDHCI Controller Base Address: %p\n", sdhci_ctrlr->ioaddr); rv = sdhci_pre_init(sdhci_ctrlr); if (rv) return rv; /* The error has been already reported */ sdhci_set_power(sdhci_ctrlr, __fls(ctrlr->voltages)); if (ctrlr->caps & DRVR_CAP_NO_CD) { unsigned int status; sdhci_writel(sdhci_ctrlr, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL); status = sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE); while ((!(status & SDHCI_CARD_PRESENT)) || (!(status & SDHCI_CARD_STATE_STABLE)) || (!(status & SDHCI_CARD_DETECT_PIN_LEVEL))) status = sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE); } /* Enable only interrupts served by the SD controller */ sdhci_writel(sdhci_ctrlr, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK, SDHCI_INT_ENABLE); /* Mask all sdhci interrupt sources */ sdhci_writel(sdhci_ctrlr, 0x0, SDHCI_SIGNAL_ENABLE); /* Set timeout to maximum, shouldn't happen if everything's right. */ sdhci_writeb(sdhci_ctrlr, 0xe, SDHCI_TIMEOUT_CONTROL); mdelay(10); ctrlr->initialized = 1; return 0; } static int sdhci_update(struct sdhci_ctrlr *sdhci_ctrlr) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; if (ctrlr->caps & DRVR_CAP_REMOVABLE) { int present = (sdhci_readl(sdhci_ctrlr, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT) != 0; if (!present) { /* A card was present indicate the controller needs * initialization on the next call. */ ctrlr->initialized = 0; return 0; } } /* A card is present, get it ready. */ if (sdhci_init(sdhci_ctrlr)) return -1; return 0; } void sdhci_update_pointers(struct sdhci_ctrlr *sdhci_ctrlr) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; /* Update the routine pointers */ ctrlr->send_cmd = &sdhci_send_command; ctrlr->set_ios = &sdhci_set_ios; ctrlr->tuning_start = &sdhci_tuning_start; ctrlr->is_tuning_complete = &sdhci_is_tuning_complete; } int add_sdhci(struct sdhci_ctrlr *sdhci_ctrlr) { struct sd_mmc_ctrlr *ctrlr = &sdhci_ctrlr->sd_mmc_ctrlr; sdhci_update_pointers(sdhci_ctrlr); /* TODO(vbendeb): check if SDHCI spec allows to retrieve this value. */ ctrlr->b_max = 65535; /* Initialize the SDHC controller */ return sdhci_update(sdhci_ctrlr); }