/* * This file is part of the coreboot project. * * Copyright (C) 2012 Alexandru Gagniuc * Copyright (C) 2012 Patrick Georgi * Copyright (C) 2010 Stefan Reinauer * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef ARCH_PIRQ_ROUTING_H #define ARCH_PIRQ_ROUTING_H /* This is the maximum number on interrupt entries that a PCI device may have. * This is NOT the number of slots or devices in the system * This is NOT the number of entries in the PIRQ table * This tells us that in the PIRQ table, we are going to have 4 link-bitmap * entries per PCI device * It is fixed at 4: INTA, INTB, INTC, and INTD * CAUTION: If you change this, pirq_routing will not work correctly*/ #define MAX_INTX_ENTRIES 4 #if CONFIG_GENERATE_PIRQ_TABLE #include #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) #define PIRQ_VERSION 0x0100 struct irq_info { u8 bus, devfn; /* Bus, device and function */ struct { u8 link; /* IRQ line ID, chipset dependent, 0=not routed */ u16 bitmap; /* Available IRQs */ } __attribute__((packed)) irq[4]; u8 slot; /* Slot number, 0=onboard */ u8 rfu; } __attribute__((packed)); #ifndef CONFIG_IRQ_SLOT_COUNT #warning "IRQ_SLOT_COUNT is not defined in Kconfig. PIRQ won't work correctly." #endif struct irq_routing_table { u32 signature; /* PIRQ_SIGNATURE should be here */ u16 version; /* PIRQ_VERSION */ u16 size; /* Table size in bytes */ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */ u16 rtr_vendor, rtr_device;/* Vendor/device ID of interrupt router */ u32 miniport_data; u8 rfu[11]; u8 checksum; /* Modulo 256 checksum must give zero */ struct irq_info slots[CONFIG_IRQ_SLOT_COUNT]; } __attribute__((packed)); unsigned long copy_pirq_routing_table(unsigned long addr, const struct irq_routing_table *routing_table); unsigned long write_pirq_routing_table(unsigned long start); #if CONFIG_PIRQ_ROUTE void pirq_assign_irqs(const unsigned char pirq[CONFIG_MAX_PIRQ_LINKS]); #endif #else #define copy_pirq_routing_table(start) (start) #define write_pirq_routing_table(start) (start) #endif #endif /* ARCH_PIRQ_ROUTING_H */