## SPDX-License-Identifier: GPL-2.0-only mainmenu "coreboot configuration" menu "General setup" config COREBOOT_BUILD bool default y config LOCALVERSION string "Local version string" help Append an extra string to the end of the coreboot version. This can be useful if, for instance, you want to append the respective board's hostname or some other identifying string to the coreboot version number, so that you can easily distinguish boot logs of different boards from each other. config CONFIGURABLE_CBFS_PREFIX bool help Select this to prompt to use to configure the prefix for cbfs files. choice prompt "CBFS prefix to use" depends on CONFIGURABLE_CBFS_PREFIX default CBFS_PREFIX_FALLBACK config CBFS_PREFIX_FALLBACK bool "fallback" config CBFS_PREFIX_NORMAL bool "normal" config CBFS_PREFIX_DIY bool "Define your own cbfs prefix" endchoice config CBFS_PREFIX string "CBFS prefix to use" if CBFS_PREFIX_DIY default "fallback" if !CONFIGURABLE_CBFS_PREFIX || CBFS_PREFIX_FALLBACK default "normal" if CBFS_PREFIX_NORMAL help Select the prefix to all files put into the image. It's "fallback" by default, "normal" is a common alternative. choice prompt "Compiler to use" default COMPILER_GCC help This option allows you to select the compiler used for building coreboot. You must build the coreboot crosscompiler for the board that you have selected. To build all the GCC crosscompilers (takes a LONG time), run: make crossgcc For help on individual architectures, run the command: make help_toolchain config COMPILER_GCC bool "GCC" help Use the GNU Compiler Collection (GCC) to build coreboot. For details see http://gcc.gnu.org. config COMPILER_LLVM_CLANG bool "LLVM/clang (TESTING ONLY - Not currently working)" help Use LLVM/clang to build coreboot. To use this, you must build the coreboot version of the clang compiler. Run the command make clang Note that this option is not currently working correctly and should really only be selected if you're trying to work on getting clang operational. For details see http://clang.llvm.org. endchoice config ANY_TOOLCHAIN bool "Allow building with any toolchain" default n help Many toolchains break when building coreboot since it uses quite unusual linker features. Unless developers explicitely request it, we'll have to assume that they use their distro compiler by mistake. Make sure that using patched compilers is a conscious decision. config CCACHE bool "Use ccache to speed up (re)compilation" default n help Enables the use of ccache for faster builds. Requires the ccache utility in your system $PATH. For details see https://ccache.samba.org. config FMD_GENPARSER bool "Generate flashmap descriptor parser using flex and bison" default n help Enable this option if you are working on the flashmap descriptor parser and made changes to fmd_scanner.l or fmd_parser.y. Otherwise, say N to use the provided pregenerated scanner/parser. config UTIL_GENPARSER bool "Generate SCONFIG & BINCFG parser using flex and bison" default n help Enable this option if you are working on the sconfig device tree parser or bincfg and made changes to the .l or .y files. Otherwise, say N to use the provided pregenerated scanner/parser. config USE_OPTION_TABLE bool "Use CMOS for configuration values" depends on HAVE_OPTION_TABLE help Enable this option if coreboot shall read options from the "CMOS" NVRAM instead of using hard-coded values. config STATIC_OPTION_TABLE bool "Load default configuration values into CMOS on each boot" depends on USE_OPTION_TABLE help Enable this option to reset "CMOS" NVRAM values to default on every boot. Use this if you want the NVRAM configuration to never be modified from its default values. config COMPRESS_RAMSTAGE bool "Compress ramstage with LZMA" depends on HAVE_RAMSTAGE # Default value set at the end of the file help Compress ramstage to save memory in the flash image. config COMPRESS_PRERAM_STAGES bool "Compress romstage and verstage with LZ4" depends on !ARCH_X86 && (HAVE_ROMSTAGE || HAVE_VERSTAGE) # Default value set at the end of the file help Compress romstage and (if it exists) verstage with LZ4 to save flash space and speed up boot, since the time for reading the image from SPI (and in the vboot case verifying it) is usually much greater than the time spent decompressing. Doesn't work for XIP stages (assume all ARCH_X86 for now) for obvious reasons. config COMPRESS_BOOTBLOCK bool depends on HAVE_BOOTBLOCK help This option can be used to compress the bootblock with LZ4 and attach a small self-decompression stub to its front. This can drastically reduce boot time on platforms where the bootblock is loaded over a very slow connection and bootblock size trumps all other factors for speed. Since using this option usually requires changes to the SoC memlayout and possibly extra support code, it should not be user-selectable. (There's no real point in offering this to the user anyway... if it works and saves boot time, you would always want it.) config INCLUDE_CONFIG_FILE bool "Include the coreboot .config file into the ROM image" # Default value set at the end of the file help Include the .config file that was used to compile coreboot in the (CBFS) ROM image. This is useful if you want to know which options were used to build a specific coreboot.rom image. Saying Y here will increase the image size by 2-3KB. You can use the following command to easily list the options: grep -a CONFIG_ coreboot.rom Alternatively, you can also use cbfstool to print the image contents (including the raw 'config' item we're looking for). Example: $ cbfstool coreboot.rom print coreboot.rom: 4096 kB, bootblocksize 1008, romsize 4194304, offset 0x0 Alignment: 64 bytes Name Offset Type Size cmos_layout.bin 0x0 CMOS layout 1159 fallback/romstage 0x4c0 stage 339756 fallback/ramstage 0x53440 stage 186664 fallback/payload 0x80dc0 payload 51526 config 0x8d740 raw 3324 (empty) 0x8e480 null 3610440 config COLLECT_TIMESTAMPS bool "Create a table of timestamps collected during boot" default y if ARCH_X86 help Make coreboot create a table of timer-ID/timer-value pairs to allow measuring time spent at different phases of the boot process. config TIMESTAMPS_ON_CONSOLE bool "Print the timestamp values on the console" default n depends on COLLECT_TIMESTAMPS help Print the timestamps to the debug console if enabled at level info. config USE_BLOBS bool "Allow use of binary-only repository" default y help This draws in the blobs repository, which contains binary files that might be required for some chipsets or boards. This flag ensures that a "Free" option remains available for users. config USE_AMD_BLOBS bool "Allow AMD blobs repository (with license agreement)" depends on USE_BLOBS help This draws in the amd_blobs repository, which contains binary files distributed by AMD, including VBIOS, PSP bootloaders, SMU firmwares, etc. Selecting this item to download or clone the repo implies your agreement to the AMD license agreement. A copy of the license text may be reviewed by reading Documentation/soc/amd/amdblobs_license.md, and your copy of the license is present in the repo once downloaded. Note that for some products, omitting PSP, SMU images, or other items may result in a nonbooting coreboot.rom. config USE_QC_BLOBS bool "Allow QC blobs repository (selecting this agrees to the license!)" depends on USE_BLOBS help This draws in the qc_blobs repository, which contains binary files distributed by Qualcomm that are required to build firmware for certain Qualcomm SoCs (including QcLib, QC-SEC, qtiseclib and QUP firmware). If you say Y here you are implicitly agreeing to the Qualcomm license agreement which can be found at: https://review.coreboot.org/cgit/qc_blobs.git/tree/LICENSE ***************************************************** PLEASE MAKE SURE YOU READ AND AGREE TO ALL TERMS IN ABOVE LICENSE AGREEMENT BEFORE SELECTING THIS OPTION! ***************************************************** Not selecting this option means certain Qualcomm SoCs and related mainboards cannot be built and will be hidden from the "Mainboards" section. config COVERAGE bool "Code coverage support" depends on COMPILER_GCC help Add code coverage support for coreboot. This will store code coverage information in CBMEM for extraction from user space. If unsure, say N. config UBSAN bool "Undefined behavior sanitizer support" default n help Instrument the code with checks for undefined behavior. If unsure, say N because it adds a small performance penalty and may abort on code that happens to work in spite of the UB. config ASAN_IN_RAMSTAGE bool "Address sanitizer support" depends on ARCH_X86 default n help Enable address sanitizer - runtime memory debugger, designed to find out-of-bounds accesses and use-after-scope bugs. This feature consumes up to 1/8 of available memory and brings about ~1.5x performance slowdown. If unsure, say N. choice prompt "Stage Cache for ACPI S3 resume" default NO_STAGE_CACHE if !HAVE_ACPI_RESUME default TSEG_STAGE_CACHE if SMM_TSEG config NO_STAGE_CACHE bool "Disabled" help Do not save any component in stage cache for resume path. On resume, all components would be read back from CBFS again. config TSEG_STAGE_CACHE bool "TSEG" depends on SMM_TSEG help The option enables stage cache support for platform. Platform can stash copies of postcar, ramstage and raw runtime data inside SMM TSEG, to be restored on S3 resume path. config CBMEM_STAGE_CACHE bool "CBMEM" depends on !SMM_TSEG help The option enables stage cache support for platform. Platform can stash copies of postcar, ramstage and raw runtime data inside CBMEM. While the approach is faster than reloading stages from boot media it is also a possible attack scenario via which OS can possibly circumvent SMM locks and SPI write protections. If unsure, select 'N' endchoice config UPDATE_IMAGE bool "Update existing coreboot.rom image" help If this option is enabled, no new coreboot.rom file is created. Instead it is expected that there already is a suitable file for further processing. The bootblock will not be modified. If unsure, select 'N' config BOOTSPLASH_IMAGE bool "Add a bootsplash image" help Select this option if you have a bootsplash image that you would like to add to your ROM. This will only add the image to the ROM. To actually run it check options under 'Display' section. config BOOTSPLASH_FILE string "Bootsplash path and filename" depends on BOOTSPLASH_IMAGE # Default value set at the end of the file help The path and filename of the file to use as graphical bootsplash screen. The file format has to be jpg. config FW_CONFIG bool "Firmware Configuration Probing" default n help Enable support for probing devices with fw_config. This is a simple bitmask broken into fields and options for probing. config FW_CONFIG_SOURCE_CBFS bool "Obtain Firmware Configuration value from CBFS" depends on FW_CONFIG default n help With this option enabled coreboot will look for the 32bit firmware configuration value in CBFS at the selected prefix with the file name "fw_config". This option will override other sources and allow the local image to preempt the mainboard selected source. config FW_CONFIG_SOURCE_CHROMEEC_CBI bool "Obtain Firmware Configuration value from Google Chrome EC CBI" depends on FW_CONFIG && EC_GOOGLE_CHROMEEC default n help This option tells coreboot to read the firmware configuration value from the Google Chrome Embedded Controller CBI interface. This source is not tried if FW_CONFIG_SOURCE_CBFS is enabled and the value was found in CBFS. config HAVE_RAMPAYLOAD bool config RAMPAYLOAD bool "Enable coreboot flow without executing ramstage" default y if ARCH_X86 depends on HAVE_RAMPAYLOAD help If this option is enabled, coreboot flow will skip ramstage loading and execution of ramstage to load payload. Instead it is expected to load payload from postcar stage itself. In this flow coreboot will perform basic x86 initialization (DRAM resource allocation), MTRR programming, Skip PCI enumeration logic and only allocate BAR for fixed devices (bootable devices, TPM over GSPI). config HAVE_CONFIGURABLE_RAMSTAGE bool config CONFIGURABLE_RAMSTAGE bool "Enable a configurable ramstage." default y if ARCH_X86 depends on HAVE_CONFIGURABLE_RAMSTAGE help A configurable ramstage allows you to select which parts of the ramstage to run. Currently, we can only select a minimal PCI scanning step. The minimal PCI scanning will only check those parts that are enabled in the devicetree.cb. By convention none of those devices should be bridges. config MINIMAL_PCI_SCANNING bool "Enable minimal PCI scanning" depends on CONFIGURABLE_RAMSTAGE && PCI help If this option is enabled, coreboot will scan only PCI devices marked as mandatory in devicetree.cb endmenu menu "Mainboard" source "src/mainboard/Kconfig" config DEVICETREE string default "devicetree.cb" help This symbol allows mainboards to select a different file under their mainboard directory for the devicetree.cb file. This allows the board variants that need different devicetrees to be in the same directory. Examples: "devicetree.variant.cb" "variant/devicetree.cb" config OVERRIDE_DEVICETREE string default "" help This symbol allows variants to provide an override devicetree file to override the registers and/or add new devices on top of the ones provided by baseboard devicetree using CONFIG_DEVICETREE. Examples: "devicetree.variant-override.cb" "variant/devicetree-override.cb" config FMDFILE string "fmap description file in fmd format" default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/chromeos.fmd" if CHROMEOS default "" help The build system creates a default FMAP from ROM_SIZE and CBFS_SIZE, but in some cases more complex setups are required. When an fmd is specified, it overrides the default format. config CBFS_SIZE hex "Size of CBFS filesystem in ROM" depends on FMDFILE = "" # Default value set at the end of the file help This is the part of the ROM actually managed by CBFS, located at the end of the ROM (passed through cbfstool -o) on x86 and at at the start of the ROM (passed through cbfstool -s) everywhere else. It defaults to span the whole ROM on all but Intel systems that use an Intel Firmware Descriptor. It can be overridden to make coreboot live alongside other components like ChromeOS's vboot/FMAP or Intel's IFD / ME / TXE binaries. This symbol should only be used to generate a default FMAP and is unused when a non-default fmd file is provided via CONFIG_FMDFILE. endmenu # load site-local kconfig to allow user specific defaults and overrides source "site-local/Kconfig" config SYSTEM_TYPE_LAPTOP default n bool config SYSTEM_TYPE_TABLET default n bool config SYSTEM_TYPE_DETACHABLE default n bool config SYSTEM_TYPE_CONVERTIBLE default n bool config CBFS_AUTOGEN_ATTRIBUTES default n bool help If this option is selected, every file in cbfs which has a constraint regarding position or alignment will get an additional file attribute which describes this constraint. menu "Chipset" comment "SoC" source "src/soc/*/Kconfig" comment "CPU" source "src/cpu/Kconfig" comment "Northbridge" source "src/northbridge/*/*/Kconfig" comment "Southbridge" source "src/southbridge/*/*/Kconfig" comment "Super I/O" source "src/superio/*/*/Kconfig" comment "Embedded Controllers" source "src/ec/acpi/Kconfig" source "src/ec/*/*/Kconfig" source "src/southbridge/intel/common/firmware/Kconfig" source "src/vendorcode/*/Kconfig" source "src/arch/*/Kconfig" endmenu source "src/device/Kconfig" menu "Generic Drivers" source "src/drivers/*/Kconfig" source "src/drivers/*/*/Kconfig" source "src/commonlib/storage/Kconfig" endmenu menu "Security" source "src/security/Kconfig" source "src/vendorcode/eltan/security/Kconfig" endmenu source "src/acpi/Kconfig" # This option is for the current boards/chipsets where SPI flash # is not the boot device. Currently nearly all boards/chipsets assume # SPI flash is the boot device. config BOOT_DEVICE_NOT_SPI_FLASH bool default n config BOOT_DEVICE_SPI_FLASH bool default y if !BOOT_DEVICE_NOT_SPI_FLASH default n config BOOT_DEVICE_MEMORY_MAPPED bool default y if ARCH_X86 && BOOT_DEVICE_SPI_FLASH default n help Inform system if SPI is memory-mapped or not. config BOOT_DEVICE_SUPPORTS_WRITES bool default n help Indicate that the platform has writable boot device support. config RTC bool default n config HEAP_SIZE hex default 0x100000 if FLATTENED_DEVICE_TREE default 0x4000 config STACK_SIZE hex default 0x1000 if ARCH_X86 default 0x0 config MAX_CPUS int default 1 source "src/console/Kconfig" config HAVE_ACPI_RESUME bool default n config DISABLE_ACPI_HIBERNATE bool default n help Removes S4 from the available sleepstates config RESUME_PATH_SAME_AS_BOOT bool default y if ARCH_X86 depends on HAVE_ACPI_RESUME help This option indicates that when a system resumes it takes the same path as a regular boot. e.g. an x86 system runs from the reset vector at 0xfffffff0 on both resume and warm/cold boot. config NO_MONOTONIC_TIMER def_bool n config HAVE_MONOTONIC_TIMER bool depends on !NO_MONOTONIC_TIMER default y help The board/chipset provides a monotonic timer. config GENERIC_UDELAY bool depends on HAVE_MONOTONIC_TIMER default y if !ARCH_X86 help The board/chipset uses a generic udelay function utilizing the monotonic timer. config TIMER_QUEUE def_bool n depends on HAVE_MONOTONIC_TIMER help Provide a timer queue for performing time-based callbacks. config COOP_MULTITASKING def_bool n depends on TIMER_QUEUE && ARCH_X86 help Cooperative multitasking allows callbacks to be multiplexed on the main thread of ramstage. With this enabled it allows for multiple execution paths to take place when they have udelay() calls within their code. config NUM_THREADS int default 4 depends on COOP_MULTITASKING help How many execution threads to cooperatively multitask with. config HAVE_OPTION_TABLE bool default n help This variable specifies whether a given board has a cmos.layout file containing NVRAM/CMOS bit definitions. It defaults to 'n' but can be selected in mainboard/*/Kconfig. config PCI_IO_CFG_EXT bool default n config IOAPIC bool default n config USE_WATCHDOG_ON_BOOT bool default n config GFXUMA bool default n help Enable Unified Memory Architecture for graphics. config HAVE_MP_TABLE bool help This variable specifies whether a given board has MP table support. It is usually set in mainboard/*/Kconfig. Whether or not the MP table is actually generated by coreboot is configurable by the user via GENERATE_MP_TABLE. config HAVE_PIRQ_TABLE bool help This variable specifies whether a given board has PIRQ table support. It is usually set in mainboard/*/Kconfig. Whether or not the PIRQ table is actually generated by coreboot is configurable by the user via GENERATE_PIRQ_TABLE. config ACPI_NHLT bool default n help Build support for NHLT (non HD Audio) ACPI table generation. #These Options are here to avoid "undefined" warnings. #The actual selection and help texts are in the following menu. menu "System tables" config GENERATE_MP_TABLE prompt "Generate an MP table" if HAVE_MP_TABLE || DRIVERS_GENERIC_IOAPIC bool default HAVE_MP_TABLE || DRIVERS_GENERIC_IOAPIC help Generate an MP table (conforming to the Intel MultiProcessor specification 1.4) for this board. If unsure, say Y. config GENERATE_PIRQ_TABLE prompt "Generate a PIRQ table" if HAVE_PIRQ_TABLE bool default HAVE_PIRQ_TABLE help Generate a PIRQ table for this board. If unsure, say Y. config GENERATE_SMBIOS_TABLES depends on ARCH_X86 bool "Generate SMBIOS tables" default y help Generate SMBIOS tables for this board. If unsure, say Y. config SMBIOS_PROVIDED_BY_MOBO bool default n config MAINBOARD_SERIAL_NUMBER prompt "SMBIOS Serial Number" if !SMBIOS_PROVIDED_BY_MOBO string depends on GENERATE_SMBIOS_TABLES default "123456789" help The Serial Number to store in SMBIOS structures. config MAINBOARD_VERSION prompt "SMBIOS Version Number" if !SMBIOS_PROVIDED_BY_MOBO string depends on GENERATE_SMBIOS_TABLES default "1.0" help The Version Number to store in SMBIOS structures. config MAINBOARD_SMBIOS_MANUFACTURER prompt "SMBIOS Manufacturer" if !SMBIOS_PROVIDED_BY_MOBO string depends on GENERATE_SMBIOS_TABLES default MAINBOARD_VENDOR help Override the default Manufacturer stored in SMBIOS structures. config MAINBOARD_SMBIOS_PRODUCT_NAME prompt "SMBIOS Product name" if !SMBIOS_PROVIDED_BY_MOBO string depends on GENERATE_SMBIOS_TABLES default MAINBOARD_PART_NUMBER help Override the default Product name stored in SMBIOS structures. config VPD_SMBIOS_VERSION bool "Populates SMBIOS type 0 version from the VPD_RO variable 'firmware_version'" default n depends on VPD && GENERATE_SMBIOS_TABLES help Selecting this option will read firmware_version from VPD_RO and override SMBIOS type 0 version. One special scenario of using this feature is to assign a BIOS version to a coreboot image without the need to rebuild from source. endmenu source "payloads/Kconfig" menu "Debugging" comment "CPU Debug Settings" source "src/cpu/*/Kconfig.debug_cpu" comment "BLOB Debug Settings" source "src/drivers/intel/fsp*/Kconfig.debug_blob" comment "General Debug Settings" # TODO: Better help text and detailed instructions. config GDB_STUB bool "GDB debugging support" default n depends on DRIVERS_UART help If enabled, you will be able to set breakpoints for gdb debugging. See src/arch/x86/lib/c_start.S for details. config GDB_WAIT bool "Wait for a GDB connection in the ramstage" default n depends on GDB_STUB help If enabled, coreboot will wait for a GDB connection in the ramstage. config FATAL_ASSERTS bool "Halt when hitting a BUG() or assertion error" default n help If enabled, coreboot will call hlt() on a BUG() or failed ASSERT(). config HAVE_DEBUG_GPIO bool config DEBUG_GPIO bool "Output verbose GPIO debug messages" depends on HAVE_DEBUG_GPIO config DEBUG_CBFS bool "Output verbose CBFS debug messages" default n help This option enables additional CBFS related debug messages. config HAVE_DEBUG_RAM_SETUP def_bool n config DEBUG_RAM_SETUP bool "Output verbose RAM init debug messages" default n depends on HAVE_DEBUG_RAM_SETUP help This option enables additional RAM init related debug messages. It is recommended to enable this when debugging issues on your board which might be RAM init related. Note: This option will increase the size of the coreboot image. If unsure, say N. config DEBUG_PIRQ bool "Check PIRQ table consistency" default n depends on GENERATE_PIRQ_TABLE help If unsure, say N. config HAVE_DEBUG_SMBUS def_bool n config DEBUG_SMBUS bool "Output verbose SMBus debug messages" default n depends on HAVE_DEBUG_SMBUS help This option enables additional SMBus (and SPD) debug messages. Note: This option will increase the size of the coreboot image. If unsure, say N. config DEBUG_SMI bool "Output verbose SMI debug messages" default n depends on HAVE_SMI_HANDLER select SPI_FLASH_SMM if SPI_CONSOLE || CONSOLE_SPI_FLASH help This option enables additional SMI related debug messages. Note: This option will increase the size of the coreboot image. If unsure, say N. config DEBUG_PERIODIC_SMI bool "Trigger SMI periodically" depends on DEBUG_SMI # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional # printk(BIOS_DEBUG, ...) calls. config DEBUG_MALLOC prompt "Output verbose malloc debug messages" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 bool default n help This option enables additional malloc related debug messages. Note: This option will increase the size of the coreboot image. If unsure, say N. config DEBUG_CONSOLE_INIT bool "Debug console initialisation code" default n help With this option printk()'s are attempted before console hardware initialisation has been completed. Your mileage may vary. Typically you will need to modify source in console_hw_init() such that a working console appears before the one you want to debug. If unsure, say N. # Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional # printk(BIOS_DEBUG, ...) calls. config REALMODE_DEBUG prompt "Enable debug messages for option ROM execution" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8 bool default n depends on PCI_OPTION_ROM_RUN_REALMODE help This option enables additional x86emu related debug messages. Note: This option will increase the time to emulate a ROM. If unsure, say N. config X86EMU_DEBUG bool "Output verbose x86emu debug messages" default n depends on PCI_OPTION_ROM_RUN_YABEL help This option enables additional x86emu related debug messages. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_JMP bool "Trace JMP/RETF" default n depends on X86EMU_DEBUG help Print information about JMP and RETF opcodes from x86emu. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_TRACE bool "Trace all opcodes" default n depends on X86EMU_DEBUG help Print _all_ opcodes that are executed by x86emu. WARNING: This will produce a LOT of output and take a long time. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_PNP bool "Log Plug&Play accesses" default n depends on X86EMU_DEBUG help Print Plug And Play accesses made by option ROMs. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_DISK bool "Log Disk I/O" default n depends on X86EMU_DEBUG help Print Disk I/O related messages. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_PMM bool "Log PMM" default n depends on X86EMU_DEBUG help Print messages related to POST Memory Manager (PMM). Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_VBE bool "Debug VESA BIOS Extensions" default n depends on X86EMU_DEBUG help Print messages related to VESA BIOS Extension (VBE) functions. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_INT10 bool "Redirect INT10 output to console" default n depends on X86EMU_DEBUG help Let INT10 (i.e. character output) calls print messages to debug output. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_INTERRUPTS bool "Log intXX calls" default n depends on X86EMU_DEBUG help Print messages related to interrupt handling. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_CHECK_VMEM_ACCESS bool "Log special memory accesses" default n depends on X86EMU_DEBUG help Print messages related to accesses to certain areas of the virtual memory (e.g. BDA (BIOS Data Area) or interrupt vectors) Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_MEM bool "Log all memory accesses" default n depends on X86EMU_DEBUG help Print memory accesses made by option ROM. Note: This also includes accesses to fetch instructions. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_IO bool "Log IO accesses" default n depends on X86EMU_DEBUG help Print I/O accesses made by option ROM. Note: This option will increase the size of the coreboot image. If unsure, say N. config X86EMU_DEBUG_TIMINGS bool "Output timing information" default n depends on X86EMU_DEBUG && HAVE_MONOTONIC_TIMER help Print timing information needed by i915tool. If unsure, say N. config DEBUG_SPI_FLASH bool "Output verbose SPI flash debug messages" default n depends on SPI_FLASH help This option enables additional SPI flash related debug messages. if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8 # Only visible with the right southbridge and loglevel. config DEBUG_INTEL_ME bool "Verbose logging for Intel Management Engine" default n help Enable verbose logging for Intel Management Engine driver that is present on Intel 6-series chipsets. endif config TRACE bool "Trace function calls" default n help If enabled, every function will print information to console once the function is entered. The syntax is ~0xaaaabbbb(0xccccdddd) the 0xaaaabbbb is the actual function and 0xccccdddd is EIP of calling function. Please note some printk related functions are omitted from trace to have good looking console dumps. config DEBUG_COVERAGE bool "Debug code coverage" default n depends on COVERAGE help If enabled, the code coverage hooks in coreboot will output some information about the coverage data that is dumped. config DEBUG_BOOT_STATE bool "Debug boot state machine" default n help Control debugging of the boot state machine. When selected displays the state boundaries in ramstage. config DEBUG_ADA_CODE bool "Compile debug code in Ada sources" default n help Add the compiler switch `-gnata` to compile code guarded by `pragma Debug`. config HAVE_EM100_SUPPORT bool "Platform can support the Dediprog EM100 SPI emulator" help This is enabled by platforms which can support using the EM100. config EM100 bool "Configure image for EM100 usage" depends on HAVE_EM100_SUPPORT help The Dediprog EM100 SPI emulator allows fast loading of new SPI images over USB. However it only supports a maximum SPI clock of 20MHz and single data output. Enable this option to use a 20MHz SPI clock and disable "Dual Output Fast Read" Support. On AMD platforms this changes the SPI speed at run-time if the mainboard code supports this. On supported Intel platforms this works by changing the settings in the descriptor.bin file. endmenu ############################################################################### # Set variables with no prompt - these can be set anywhere, and putting at # the end of this file gives the most flexibility. source "src/lib/Kconfig" config WARNINGS_ARE_ERRORS bool default y # The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE, # POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are # mutually exclusive. One of these options must be selected in the # mainboard Kconfig if the chipset supports enabling and disabling of # the power button. Chipset code uses the ENABLE_POWER_BUTTON option set # in mainboard/Kconfig to know if the button should be enabled or not. config POWER_BUTTON_DEFAULT_ENABLE def_bool n help Select when the board has a power button which can optionally be disabled by the user. config POWER_BUTTON_DEFAULT_DISABLE def_bool n help Select when the board has a power button which can optionally be enabled by the user, e.g. when the board ships with a jumper over the power switch contacts. config POWER_BUTTON_FORCE_ENABLE def_bool n help Select when the board requires that the power button is always enabled. config POWER_BUTTON_FORCE_DISABLE def_bool n help Select when the board requires that the power button is always disabled, e.g. when it has been hardwired to ground. config POWER_BUTTON_IS_OPTIONAL bool default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE) help Internal option that controls ENABLE_POWER_BUTTON visibility. config REG_SCRIPT bool default n help Internal option that controls whether we compile in register scripts. config MAX_REBOOT_CNT int default 3 help Internal option that sets the maximum number of bootblock executions allowed with the normal image enabled before assuming the normal image is defective and switching to the fallback image. config UNCOMPRESSED_RAMSTAGE bool config NO_XIP_EARLY_STAGES bool default n if ARCH_X86 default y help Identify if early stages are eXecute-In-Place(XIP). config EARLY_CBMEM_LIST bool default n help Enable display of CBMEM during romstage and postcar. config RELOCATABLE_MODULES bool help If RELOCATABLE_MODULES is selected then support is enabled for building relocatable modules in the RAM stage. Those modules can be loaded anywhere and all the relocations are handled automatically. config GENERIC_GPIO_LIB bool help If enabled, compile the generic GPIO library. A "generic" GPIO implies configurability usually found on SoCs, particularly the ability to control internal pull resistors. config BOOTBLOCK_CUSTOM # To be selected by arch, SoC or mainboard if it does not want use the normal # src/lib/bootblock.c#main() C entry point. bool config MEMLAYOUT_LD_FILE string default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/memlayout.ld" help This variable allows SoC/mainboard to supply in a custom linker file if required. This determines the linker file used for all the stages (bootblock, romstage, verstage, ramstage, postcar) in src/arch/${ARCH}/Makefile.inc. ############################################################################### # Set default values for symbols created before mainboards. This allows the # option to be displayed in the general menu, but the default to be loaded in # the mainboard if desired. config COMPRESS_RAMSTAGE default y if !UNCOMPRESSED_RAMSTAGE config COMPRESS_PRERAM_STAGES depends on !ARCH_X86 default y config INCLUDE_CONFIG_FILE default y config BOOTSPLASH_FILE depends on BOOTSPLASH_IMAGE default "bootsplash.jpg" config CBFS_SIZE default ROM_SIZE config HAVE_BOOTBLOCK bool default y config HAVE_VERSTAGE bool depends on VBOOT_SEPARATE_VERSTAGE default y config HAVE_ROMSTAGE bool default y config HAVE_RAMSTAGE bool default n if RAMPAYLOAD default y