/* * This file is part of the libpayload project. * * Copyright (C) 2010 Patrick Georgi * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ //#define USB_DEBUG #include #include #include "ohci_private.h" #include "ohci.h" static void ohci_start (hci_t *controller); static void ohci_stop (hci_t *controller); static void ohci_reset (hci_t *controller); static void ohci_shutdown (hci_t *controller); static int ohci_bulk (endpoint_t *ep, int size, u8 *data, int finalize); static int ohci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq, int dalen, u8 *data); static void* ohci_create_intr_queue (endpoint_t *ep, int reqsize, int reqcount, int reqtiming); static void ohci_destroy_intr_queue (endpoint_t *ep, void *queue); static u8* ohci_poll_intr_queue (void *queue); static int ohci_process_done_queue(ohci_t *ohci, int spew_debug); #ifdef USB_DEBUG static void dump_td (td_t *cur) { usb_debug("+---------------------------------------------------+\n"); if (((cur->config & (3UL << 19)) >> 19) == 0) usb_debug("|..[SETUP]..........................................|\n"); else if (((cur->config & (3UL << 8)) >> 8) == 2) usb_debug("|..[IN].............................................|\n"); else if (((cur->config & (3UL << 8)) >> 8) == 1) usb_debug("|..[OUT]............................................|\n"); else usb_debug("|..[]...............................................|\n"); usb_debug("|:|============ OHCI TD at [0x%08lx] ==========|:|\n", virt_to_phys(cur)); usb_debug("|:| ERRORS = [%ld] | CONFIG = [0x%08lx] | |:|\n", 3 - ((cur->config & (3UL << 26)) >> 26), cur->config); usb_debug("|:+-----------------------------------------------+:|\n"); usb_debug("|:| C | Condition Code | [%02ld] |:|\n", (cur->config & (0xFUL << 28)) >> 28); usb_debug("|:| O | Direction/PID | [%ld] |:|\n", (cur->config & (3UL << 19)) >> 19); usb_debug("|:| N | Buffer Rounding | [%ld] |:|\n", (cur->config & (1UL << 18)) >> 18); usb_debug("|:| F | Delay Intterrupt | [%ld] |:|\n", (cur->config & (7UL << 21)) >> 21); usb_debug("|:| I | Data Toggle | [%ld] |:|\n", (cur->config & (3UL << 24)) >> 24); usb_debug("|:| G | Error Count | [%ld] |:|\n", (cur->config & (3UL << 26)) >> 26); usb_debug("|:+-----------------------------------------------+:|\n"); usb_debug("|:| Current Buffer Pointer [0x%08lx] |:|\n", cur->current_buffer_pointer); usb_debug("|:+-----------------------------------------------+:|\n"); usb_debug("|:| Next TD [0x%08lx] |:|\n", cur->next_td); usb_debug("|:+-----------------------------------------------+:|\n"); usb_debug("|:| Current Buffer End [0x%08lx] |:|\n", cur->buffer_end); usb_debug("|:|-----------------------------------------------|:|\n"); usb_debug("|...................................................|\n"); usb_debug("+---------------------------------------------------+\n"); } static void dump_ed (ed_t *cur) { td_t *tmp_td = NULL; usb_debug("+===================================================+\n"); usb_debug("| ############# OHCI ED at [0x%08lx] ########### |\n", virt_to_phys(cur)); usb_debug("+---------------------------------------------------+\n"); usb_debug("| Next Endpoint Descriptor [0x%08lx] |\n", cur->next_ed & ~0xFUL); usb_debug("+---------------------------------------------------+\n"); usb_debug("| | @ 0x%08lx : |\n", cur->config); usb_debug("| C | Maximum Packet Length | [%04ld] |\n", ((cur->config & (0x3fffUL << 16)) >> 16)); usb_debug("| O | Function Address | [%04ld] |\n", cur->config & 0x7F); usb_debug("| N | Endpoint Number | [%02ld] |\n", (cur->config & (0xFUL << 7)) >> 7); usb_debug("| F | Endpoint Direction | [%ld] |\n", ((cur->config & (3UL << 11)) >> 11)); usb_debug("| I | Endpoint Speed | [%ld] |\n", ((cur->config & (1UL << 13)) >> 13)); usb_debug("| G | Skip | [%ld] |\n", ((cur->config & (1UL << 14)) >> 14)); usb_debug("| | Format | [%ld] |\n", ((cur->config & (1UL << 15)) >> 15)); usb_debug("+---------------------------------------------------+\n"); usb_debug("| TD Queue Tail Pointer [0x%08lx] |\n", cur->tail_pointer & ~0xFUL); usb_debug("+---------------------------------------------------+\n"); usb_debug("| TD Queue Head Pointer [0x%08lx] |\n", cur->head_pointer & ~0xFUL); usb_debug("| CarryToggleBit [%d] Halted [%d] |\n", (u16)(cur->head_pointer & 0x2UL)>>1, (u16)(cur->head_pointer & 0x1UL)); tmp_td = (td_t *)phys_to_virt((cur->head_pointer & ~0xFUL)); if ((cur->head_pointer & ~0xFUL) != (cur->tail_pointer & ~0xFUL)) { usb_debug("|:::::::::::::::::: OHCI TD CHAIN ::::::::::::::::::|\n"); while (virt_to_phys(tmp_td) != (cur->tail_pointer & ~0xFUL)) { dump_td(tmp_td); tmp_td = (td_t *)phys_to_virt((tmp_td->next_td & ~0xFUL)); } usb_debug("|:::::::::::::::: EOF OHCI TD CHAIN ::::::::::::::::|\n"); usb_debug("+---------------------------------------------------+\n"); } else { usb_debug("+---------------------------------------------------+\n"); } } #endif static void ohci_reset (hci_t *controller) { if (controller == NULL) return; OHCI_INST(controller)->opreg->HcCommandStatus = HostControllerReset; mdelay(2); /* wait 2ms */ OHCI_INST(controller)->opreg->HcControl = 0; mdelay(10); /* wait 10ms */ } static void ohci_reinit (hci_t *controller) { } #if 0 && defined(USB_DEBUG) /* Section 4.3.3 */ static const char *completion_codes[] = { "No error", "CRC", "Bit stuffing", "Data toggle mismatch", "Stall", "Device not responding", "PID check failure", "Unexpected PID", "Data overrun", "Data underrun", "--- (10)", "--- (11)", "Buffer overrun", "Buffer underrun", "Not accessed (14)", "Not accessed (15)" }; /* Section 4.3.1.2 */ static const char *direction[] = { "SETUP", "OUT", "IN", "reserved / from TD" }; #endif hci_t * ohci_init (unsigned long physical_bar) { int i; hci_t *controller = new_controller (); controller->instance = xzalloc(sizeof (ohci_t)); controller->reg_base = (uintptr_t)physical_bar; controller->type = OHCI; controller->start = ohci_start; controller->stop = ohci_stop; controller->reset = ohci_reset; controller->init = ohci_reinit; controller->shutdown = ohci_shutdown; controller->bulk = ohci_bulk; controller->control = ohci_control; controller->set_address = generic_set_address; controller->finish_device_config = NULL; controller->destroy_device = NULL; controller->create_intr_queue = ohci_create_intr_queue; controller->destroy_intr_queue = ohci_destroy_intr_queue; controller->poll_intr_queue = ohci_poll_intr_queue; init_device_entry (controller, 0); OHCI_INST (controller)->roothub = controller->devices[0]; OHCI_INST (controller)->opreg = (opreg_t*)phys_to_virt(physical_bar); usb_debug("OHCI Version %x.%x\n", (OHCI_INST (controller)->opreg->HcRevision >> 4) & 0xf, OHCI_INST (controller)->opreg->HcRevision & 0xf); if ((OHCI_INST (controller)->opreg->HcControl & HostControllerFunctionalStateMask) == USBReset) { /* cold boot */ OHCI_INST (controller)->opreg->HcControl &= ~RemoteWakeupConnected; OHCI_INST (controller)->opreg->HcFmInterval = (11999 * FrameInterval) | ((((11999 - 210)*6)/7) * FSLargestDataPacket); /* TODO: right value for PowerOnToPowerGoodTime ? */ OHCI_INST (controller)->opreg->HcRhDescriptorA = NoPowerSwitching | NoOverCurrentProtection | (10 * PowerOnToPowerGoodTime); OHCI_INST (controller)->opreg->HcRhDescriptorB = (0 * DeviceRemovable); udelay(100); /* TODO: reset asserting according to USB spec */ } else if ((OHCI_INST (controller)->opreg->HcControl & HostControllerFunctionalStateMask) != USBOperational) { OHCI_INST (controller)->opreg->HcControl = (OHCI_INST (controller)->opreg->HcControl & ~HostControllerFunctionalStateMask) | USBResume; udelay(100); /* TODO: resume time according to USB spec */ } int interval = OHCI_INST (controller)->opreg->HcFmInterval; OHCI_INST (controller)->opreg->HcCommandStatus = HostControllerReset; udelay (10); /* at most 10us for reset to complete. State must be set to Operational within 2ms (5.1.1.4) */ OHCI_INST (controller)->opreg->HcFmInterval = interval; OHCI_INST (controller)->hcca = dma_memalign(256, 256); if (!OHCI_INST(controller)->hcca) fatal("Not enough DMA memory for OHCI HCCA.\n"); memset((void*)OHCI_INST (controller)->hcca, 0, 256); if (dma_initialized()) { OHCI_INST(controller)->dma_buffer = dma_memalign(4096, DMA_SIZE); if (!OHCI_INST(controller)->dma_buffer) fatal("Not enough DMA memory for OHCI bounce buffer.\n"); } /* Initialize interrupt table. */ u32 *const intr_table = OHCI_INST(controller)->hcca->HccaInterruptTable; ed_t *const periodic_ed = dma_memalign(sizeof(ed_t), sizeof(ed_t)); if (!periodic_ed) fatal("Not enough DMA memory for OHCI interrupt table.\n"); memset((void *)periodic_ed, 0, sizeof(*periodic_ed)); for (i = 0; i < 32; ++i) intr_table[i] = virt_to_phys(periodic_ed); OHCI_INST (controller)->periodic_ed = periodic_ed; OHCI_INST (controller)->opreg->HcHCCA = virt_to_phys(OHCI_INST (controller)->hcca); /* Make sure periodic schedule is enabled. */ OHCI_INST (controller)->opreg->HcControl |= PeriodicListEnable; OHCI_INST (controller)->opreg->HcControl &= ~IsochronousEnable; // unused by this driver // disable everything, contrary to what OHCI spec says in 5.1.1.4, as we don't need IRQs OHCI_INST (controller)->opreg->HcInterruptEnable = 1 << 31; OHCI_INST (controller)->opreg->HcInterruptDisable = ~(1 << 31); OHCI_INST (controller)->opreg->HcInterruptStatus = ~0; OHCI_INST (controller)->opreg->HcPeriodicStart = (((OHCI_INST (controller)->opreg->HcFmInterval & FrameIntervalMask) / 10) * 9); OHCI_INST (controller)->opreg->HcControl = (OHCI_INST (controller)->opreg->HcControl & ~HostControllerFunctionalStateMask) | USBOperational; mdelay(100); controller->devices[0]->controller = controller; controller->devices[0]->init = ohci_rh_init; controller->devices[0]->init (controller->devices[0]); return controller; } #if CONFIG(LP_USB_PCI) hci_t * ohci_pci_init (pcidev_t addr) { u32 reg_base; /* regarding OHCI spec, Appendix A, BAR_OHCI register description, Table A-4 * BASE ADDRESS only [31-12] bits. All other usually 0, but not all. * OHCI mandates MMIO, so bit 0 is clear */ reg_base = pci_read_config32 (addr, 0x10) & 0xfffff000; return ohci_init((unsigned long)reg_base); } #endif static void ohci_shutdown (hci_t *controller) { if (controller == 0) return; detach_controller (controller); ohci_stop(controller); ohci_reset(controller); free (OHCI_INST (controller)->hcca); free ((void *)OHCI_INST (controller)->periodic_ed); free (OHCI_INST (controller)); free (controller); } static void ohci_start (hci_t *controller) { OHCI_INST (controller)->opreg->HcControl |= PeriodicListEnable; } static void ohci_stop (hci_t *controller) { OHCI_INST (controller)->opreg->HcControl &= ~PeriodicListEnable; } #define OHCI_SLEEP_TIME_US 1000 static int wait_for_ed(usbdev_t *dev, ed_t *head, int pages) { /* wait for results */ int timeout = USB_MAX_PROCESSING_TIME_US / OHCI_SLEEP_TIME_US; while (((head->head_pointer & ~3) != head->tail_pointer) && !(head->head_pointer & 1) && ((((td_t*)phys_to_virt(head->head_pointer & ~3))->config & TD_CC_MASK) >= TD_CC_NOACCESS) && timeout--) { /* don't log every ms */ if (!(timeout % 100)) usb_debug("intst: %x; ctrl: %x; cmdst: %x; head: %x -> %x, tail: %x, condition: %x\n", OHCI_INST(dev->controller)->opreg->HcInterruptStatus, OHCI_INST(dev->controller)->opreg->HcControl, OHCI_INST(dev->controller)->opreg->HcCommandStatus, head->head_pointer, ((td_t*)phys_to_virt(head->head_pointer & ~3))->next_td, head->tail_pointer, (((td_t*)phys_to_virt(head->head_pointer & ~3))->config & TD_CC_MASK) >> TD_CC_SHIFT); udelay(OHCI_SLEEP_TIME_US); } if (timeout <= 0) usb_debug("Error: ohci: endpoint " "descriptor processing timed out.\n"); /* Clear the done queue. */ int result = ohci_process_done_queue(OHCI_INST(dev->controller), 1); if (head->head_pointer & 1) { usb_debug("HALTED!\n"); return -1; } return result; } static void ohci_free_ed (ed_t *const head) { /* In case the transfer canceled, we have to free unprocessed TDs. */ while ((head->head_pointer & ~0x3) != head->tail_pointer) { /* Save current TD pointer. */ td_t *const cur_td = (td_t*)phys_to_virt(head->head_pointer & ~0x3); /* Advance head pointer. */ head->head_pointer = cur_td->next_td; /* Free current TD. */ free((void *)cur_td); } /* Always free the dummy TD */ if ((head->head_pointer & ~0x3) == head->tail_pointer) free(phys_to_virt(head->head_pointer & ~0x3)); /* and the ED. */ free((void *)head); } static int ohci_control (usbdev_t *dev, direction_t dir, int drlen, void *setup, int dalen, unsigned char *src) { u8 *data = src; u8 *devreq = setup; int remaining = dalen; td_t *cur; if (!dma_coherent(devreq)) { devreq = OHCI_INST(dev->controller)->dma_buffer; memcpy(devreq, setup, drlen); } if (dalen > 0 && !dma_coherent(src)) { data = OHCI_INST(dev->controller)->dma_buffer + drlen; if (drlen + dalen > DMA_SIZE) { usb_debug("OHCI control transfer too large for DMA buffer: %d\n", drlen + dalen); return -1; } if (dir == OUT) memcpy(data, src, dalen); } // pages are specified as 4K in OHCI, so don't use getpagesize() int first_page = (unsigned long)data / 4096; int last_page = (unsigned long)(data+dalen-1)/4096; if (last_page < first_page) last_page = first_page; int pages = (dalen == 0)?0:(last_page - first_page + 1); /* First TD. */ td_t *const first_td = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!first_td) fatal("Not enough DMA memory for OHCI first TD in buffer.\n"); memset((void *)first_td, 0, sizeof(*first_td)); cur = first_td; cur->config = TD_DIRECTION_SETUP | TD_DELAY_INTERRUPT_NOINTR | TD_TOGGLE_FROM_TD | TD_TOGGLE_DATA0 | TD_CC_NOACCESS; cur->current_buffer_pointer = virt_to_phys(devreq); cur->buffer_end = virt_to_phys(devreq + drlen - 1); while (pages > 0) { /* One more TD. */ td_t *const next = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!next) fatal("Not enough DMA memory for OHCI new page.\n"); memset((void *)next, 0, sizeof(*next)); /* Linked to the previous. */ cur->next_td = virt_to_phys(next); /* Advance to the new TD. */ cur = next; cur->config = (dir == IN ? TD_DIRECTION_IN : TD_DIRECTION_OUT) | TD_DELAY_INTERRUPT_NOINTR | TD_TOGGLE_FROM_ED | TD_CC_NOACCESS; cur->current_buffer_pointer = virt_to_phys(data); pages--; int consumed = (4096 - ((unsigned long)data % 4096)); if (consumed >= remaining) { // end of data is within same page cur->buffer_end = virt_to_phys(data + remaining - 1); remaining = 0; /* assert(pages == 0); */ } else { remaining -= consumed; data += consumed; pages--; int second_page_size = remaining; if (remaining > 4096) { second_page_size = 4096; } cur->buffer_end = virt_to_phys(data + second_page_size - 1); remaining -= second_page_size; data += second_page_size; } } /* One more TD. */ td_t *const next_td = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!next_td) fatal("Not enough DMA memory for OHCI additional TD.\n"); memset((void *)next_td, 0, sizeof(*next_td)); /* Linked to the previous. */ cur->next_td = virt_to_phys(next_td); /* Advance to the new TD. */ cur = next_td; cur->config = (dir == IN ? TD_DIRECTION_OUT : TD_DIRECTION_IN) | TD_DELAY_INTERRUPT_ZERO | /* Write done head after this TD. */ TD_TOGGLE_FROM_TD | TD_TOGGLE_DATA1 | TD_CC_NOACCESS; cur->current_buffer_pointer = 0; cur->buffer_end = 0; /* Final dummy TD. */ td_t *const final_td = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!final_td) fatal("Not enough DMA memory for OHCI dummy TD!\n"); memset((void *)final_td, 0, sizeof(*final_td)); /* Linked to the previous. */ cur->next_td = virt_to_phys(final_td); /* Data structures */ ed_t *head = dma_memalign(sizeof(ed_t), sizeof(ed_t)); if (!head) fatal("Not enough DMA memory for OHCI data structures.\n"); memset((void*)head, 0, sizeof(*head)); head->config = (dev->address << ED_FUNC_SHIFT) | (0 << ED_EP_SHIFT) | (OHCI_FROM_TD << ED_DIR_SHIFT) | (dev->speed?ED_LOWSPEED:0) | (dev->endpoints[0].maxpacketsize << ED_MPS_SHIFT); head->tail_pointer = virt_to_phys(final_td); head->head_pointer = virt_to_phys(first_td); usb_debug("ohci_control(): doing transfer with %x. first_td at %x\n", head->config & ED_FUNC_MASK, virt_to_phys(first_td)); #ifdef USB_DEBUG dump_ed(head); #endif /* activate schedule */ OHCI_INST(dev->controller)->opreg->HcControlHeadED = virt_to_phys(head); OHCI_INST(dev->controller)->opreg->HcControl |= ControlListEnable; OHCI_INST(dev->controller)->opreg->HcCommandStatus = ControlListFilled; int result = wait_for_ed(dev, head, (dalen == 0)?0:(last_page - first_page + 1)); /* Wait some frames before and one after disabling list access. */ mdelay(4); OHCI_INST(dev->controller)->opreg->HcControl &= ~ControlListEnable; mdelay(1); /* free memory */ ohci_free_ed(head); if (result >= 0) { result = dalen - result; if (dir == IN && data != src) memcpy(src, data, result); } return result; } /* finalize == 1: if data is of packet aligned size, add a zero length packet */ static int ohci_bulk (endpoint_t *ep, int dalen, u8 *src, int finalize) { int i; td_t *cur, *next; int remaining = dalen; u8 *data = src; usb_debug("bulk: %x bytes from %x, finalize: %x, maxpacketsize: %x\n", dalen, src, finalize, ep->maxpacketsize); if (!dma_coherent(src)) { data = OHCI_INST(ep->dev->controller)->dma_buffer; if (dalen > DMA_SIZE) { usb_debug("OHCI bulk transfer too large for DMA buffer: %d\n", dalen); return -1; } if (ep->direction == OUT) memcpy(data, src, dalen); } // pages are specified as 4K in OHCI, so don't use getpagesize() int first_page = (unsigned long)data / 4096; int last_page = (unsigned long)(data+dalen-1)/4096; if (last_page < first_page) last_page = first_page; int pages = (dalen == 0)?0:(last_page - first_page + 1); int td_count = (pages+1)/2; if (finalize && ((dalen % ep->maxpacketsize) == 0)) { td_count++; } /* First TD. */ td_t *const first_td = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!first_td) fatal("Not enough DMA memory for OHCI bulk transfer.\n"); memset((void *)first_td, 0, sizeof(*first_td)); cur = next = first_td; for (i = 0; i < td_count; ++i) { /* Advance to next TD. */ cur = next; cur->config = (ep->direction == IN ? TD_DIRECTION_IN : TD_DIRECTION_OUT) | TD_DELAY_INTERRUPT_NOINTR | TD_TOGGLE_FROM_ED | TD_CC_NOACCESS; cur->current_buffer_pointer = virt_to_phys(data); pages--; if (remaining == 0) { /* magic TD for empty packet transfer */ cur->current_buffer_pointer = 0; cur->buffer_end = 0; /* assert((pages == 0) && finalize); */ } int consumed = (4096 - ((unsigned long)data % 4096)); if (consumed >= remaining) { // end of data is within same page cur->buffer_end = virt_to_phys(data + remaining - 1); remaining = 0; /* assert(pages == finalize); */ } else { remaining -= consumed; data += consumed; pages--; int second_page_size = remaining; if (remaining > 4096) { second_page_size = 4096; } cur->buffer_end = virt_to_phys(data + second_page_size - 1); remaining -= second_page_size; data += second_page_size; } /* One more TD. */ next = (td_t *)dma_memalign(sizeof(td_t), sizeof(td_t)); if (!next) fatal("Not enough DMA mem for TD bulk transfer.\n"); memset((void *)next, 0, sizeof(*next)); /* Linked to the previous. */ cur->next_td = virt_to_phys(next); } /* Write done head after last TD. */ cur->config &= ~TD_DELAY_INTERRUPT_MASK; /* Advance to final, dummy TD. */ cur = next; /* Data structures */ ed_t *head = dma_memalign(sizeof(ed_t), sizeof(ed_t)); if (!head) fatal("Not enough DMA memory for OHCI bulk transfer's head.\n"); memset((void*)head, 0, sizeof(*head)); head->config = (ep->dev->address << ED_FUNC_SHIFT) | ((ep->endpoint & 0xf) << ED_EP_SHIFT) | (((ep->direction == IN)?OHCI_IN:OHCI_OUT) << ED_DIR_SHIFT) | (ep->dev->speed?ED_LOWSPEED:0) | (ep->maxpacketsize << ED_MPS_SHIFT); head->tail_pointer = virt_to_phys(cur); head->head_pointer = virt_to_phys(first_td) | (ep->toggle?ED_TOGGLE:0); usb_debug("doing bulk transfer with %x(%x). first_td at %x, last %x\n", head->config & ED_FUNC_MASK, (head->config & ED_EP_MASK) >> ED_EP_SHIFT, virt_to_phys(first_td), virt_to_phys(cur)); /* activate schedule */ OHCI_INST(ep->dev->controller)->opreg->HcBulkHeadED = virt_to_phys(head); OHCI_INST(ep->dev->controller)->opreg->HcControl |= BulkListEnable; OHCI_INST(ep->dev->controller)->opreg->HcCommandStatus = BulkListFilled; int result = wait_for_ed(ep->dev, head, (dalen == 0)?0:(last_page - first_page + 1)); /* Wait some frames before and one after disabling list access. */ mdelay(4); OHCI_INST(ep->dev->controller)->opreg->HcControl &= ~BulkListEnable; mdelay(1); ep->toggle = head->head_pointer & ED_TOGGLE; /* free memory */ ohci_free_ed(head); if (result >= 0) { result = dalen - result; if (ep->direction == IN && data != src) memcpy(src, data, result); } return result; } struct _intr_queue; struct _intrq_td { volatile td_t td; u8 *data; struct _intrq_td *next; struct _intr_queue *intrq; }; struct _intr_queue { volatile ed_t ed; struct _intrq_td *head; struct _intrq_td *tail; u8 *data; int reqsize; endpoint_t *endp; unsigned int remaining_tds; int destroy; }; typedef struct _intrq_td intrq_td_t; typedef struct _intr_queue intr_queue_t; #define INTRQ_TD_FROM_TD(x) ((intrq_td_t *)x) static void ohci_fill_intrq_td(intrq_td_t *const td, intr_queue_t *const intrq, u8 *const data) { memset(td, 0, sizeof(*td)); td->td.config = TD_QUEUETYPE_INTR | (intrq->endp->direction == IN ? TD_DIRECTION_IN : TD_DIRECTION_OUT) | TD_DELAY_INTERRUPT_ZERO | TD_TOGGLE_FROM_ED | TD_CC_NOACCESS; td->td.current_buffer_pointer = virt_to_phys(data); td->td.buffer_end = td->td.current_buffer_pointer + intrq->reqsize - 1; td->intrq = intrq; td->data = data; } /* create and hook-up an intr queue into device schedule */ static void * ohci_create_intr_queue(endpoint_t *const ep, const int reqsize, const int reqcount, const int reqtiming) { int i; intrq_td_t *first_td = NULL, *last_td = NULL; if (reqsize > 4096) return NULL; intr_queue_t *const intrq = (intr_queue_t *)dma_memalign(sizeof(intrq->ed), sizeof(*intrq)); if (!intrq) { usb_debug("Not enough DMA memory for intr queue.\n"); free(intrq); return NULL; } memset(intrq, 0, sizeof(*intrq)); intrq->data = (u8 *)dma_malloc(reqcount * reqsize); intrq->reqsize = reqsize; intrq->endp = ep; /* Create #reqcount TDs. */ u8 *cur_data = intrq->data; for (i = 0; i < reqcount; ++i) { intrq_td_t *const td = dma_memalign(sizeof(td->td), sizeof(*td)); if (!td) fatal("Not enough DMA mem to transfer descriptor.\n"); ++intrq->remaining_tds; ohci_fill_intrq_td(td, intrq, cur_data); cur_data += reqsize; if (!first_td) first_td = td; else last_td->td.next_td = virt_to_phys(&td->td); last_td = td; } /* Create last, dummy TD. */ intrq_td_t *dummy_td = dma_memalign(sizeof(dummy_td->td), sizeof(*dummy_td)); if (!dummy_td) fatal("Not enough memory to add dummy TD.\n"); memset(dummy_td, 0, sizeof(*dummy_td)); dummy_td->intrq = intrq; if (last_td) last_td->td.next_td = virt_to_phys(&dummy_td->td); last_td = dummy_td; /* Initialize ED. */ intrq->ed.config = (ep->dev->address << ED_FUNC_SHIFT) | ((ep->endpoint & 0xf) << ED_EP_SHIFT) | (((ep->direction == IN) ? OHCI_IN : OHCI_OUT) << ED_DIR_SHIFT) | (ep->dev->speed ? ED_LOWSPEED : 0) | (ep->maxpacketsize << ED_MPS_SHIFT); intrq->ed.tail_pointer = virt_to_phys(last_td); intrq->ed.head_pointer = virt_to_phys(first_td) | (ep->toggle ? ED_TOGGLE : 0); /* Insert ED into periodic table. */ int nothing_placed = 1; ohci_t *const ohci = OHCI_INST(ep->dev->controller); u32 *const intr_table = ohci->hcca->HccaInterruptTable; const u32 dummy_ptr = virt_to_phys(ohci->periodic_ed); for (i = 0; i < 32; i += reqtiming) { /* Advance to the next free position. */ while ((i < 32) && (intr_table[i] != dummy_ptr)) ++i; if (i < 32) { intr_table[i] = virt_to_phys(&intrq->ed); nothing_placed = 0; } } if (nothing_placed) { usb_debug("Error: Failed to place ohci interrupt endpoint " "descriptor into periodic table: no space left\n"); ohci_destroy_intr_queue(ep, intrq); return NULL; } return intrq; } /* remove queue from device schedule, dropping all data that came in */ static void ohci_destroy_intr_queue(endpoint_t *const ep, void *const q_) { intr_queue_t *const intrq = (intr_queue_t *)q_; int i; /* Remove interrupt queue from periodic table. */ ohci_t *const ohci = OHCI_INST(ep->dev->controller); u32 *const intr_table = ohci->hcca->HccaInterruptTable; for (i=0; i < 32; ++i) { if (intr_table[i] == virt_to_phys(intrq)) intr_table[i] = virt_to_phys(ohci->periodic_ed); } /* Wait for frame to finish. */ mdelay(1); /* Free unprocessed TDs. */ while ((intrq->ed.head_pointer & ~0x3) != intrq->ed.tail_pointer) { td_t *const cur_td = (td_t *)phys_to_virt(intrq->ed.head_pointer & ~0x3); intrq->ed.head_pointer = cur_td->next_td; free(INTRQ_TD_FROM_TD(cur_td)); --intrq->remaining_tds; } /* Free final, dummy TD. */ free(phys_to_virt(intrq->ed.head_pointer & ~0x3)); /* Free data buffer. */ free(intrq->data); /* Free TDs already fetched from the done queue. */ ohci_process_done_queue(ohci, 1); while (intrq->head) { intrq_td_t *const cur_td = intrq->head; intrq->head = intrq->head->next; free(cur_td); --intrq->remaining_tds; } /* Mark interrupt queue to be destroyed. ohci_process_done_queue() will free the remaining TDs and finish the interrupt queue off once all TDs are gone. */ intrq->destroy = 1; /* Save data toggle. */ ep->toggle = intrq->ed.head_pointer & ED_TOGGLE; } /* read one intr-packet from queue, if available. extend the queue for new input. return NULL if nothing new available. Recommended use: while (data=poll_intr_queue(q)) process(data); */ static u8 * ohci_poll_intr_queue(void *const q_) { intr_queue_t *const intrq = (intr_queue_t *)q_; u8 *data = NULL; /* Process done queue first, then check if we have work to do. */ ohci_process_done_queue(OHCI_INST(intrq->endp->dev->controller), 0); if (intrq->head) { /* Save pointer to processed TD and advance. */ intrq_td_t *const cur_td = intrq->head; intrq->head = cur_td->next; /* Return data buffer of this TD. */ data = cur_td->data; /* Requeue this TD (i.e. copy to dummy and requeue as dummy). */ intrq_td_t *const dummy_td = INTRQ_TD_FROM_TD(phys_to_virt(intrq->ed.tail_pointer)); ohci_fill_intrq_td(dummy_td, intrq, cur_td->data); /* Reset all but intrq pointer (i.e. init as dummy). */ memset(cur_td, 0, sizeof(*cur_td)); cur_td->intrq = intrq; /* Insert into interrupt queue as dummy. */ dummy_td->td.next_td = virt_to_phys(&cur_td->td); intrq->ed.tail_pointer = virt_to_phys(&cur_td->td); } return data; } static int ohci_process_done_queue(ohci_t *const ohci, const int spew_debug) { /* returns the amount of bytes *not* transmitted for short packets */ int result = 0; int i, j; /* Temporary queue of interrupt queue TDs (to reverse order). */ intrq_td_t *temp_tdq = NULL; /* Check if done head has been written. */ if (!(ohci->opreg->HcInterruptStatus & WritebackDoneHead)) return 0; /* Fetch current done head. Lsb is only interesting for hw interrupts. */ u32 phys_done_queue = ohci->hcca->HccaDoneHead & ~1; /* Tell host controller, he may overwrite the done head pointer. */ ohci->opreg->HcInterruptStatus = WritebackDoneHead; i = 0; /* Process done queue (it's in reversed order). */ while (phys_done_queue) { td_t *const done_td = (td_t *)phys_to_virt(phys_done_queue); /* Advance pointer to next TD. */ phys_done_queue = done_td->next_td; switch (done_td->config & TD_QUEUETYPE_MASK) { case TD_QUEUETYPE_ASYNC: /* Free processed async TDs and count short transfer. */ if (done_td->current_buffer_pointer) result += (done_td->buffer_end & 0xfff) - (done_td->current_buffer_pointer & 0xfff) + 1; free((void *)done_td); break; case TD_QUEUETYPE_INTR: { intrq_td_t *const td = INTRQ_TD_FROM_TD(done_td); intr_queue_t *const intrq = td->intrq; /* Check if the corresponding interrupt queue is still beeing processed. */ if (intrq->destroy) { /* Free this TD, and */ free(td); --intrq->remaining_tds; usb_debug("Freed TD from orphaned interrupt " "queue, %d TDs remain.\n", intrq->remaining_tds); /* the interrupt queue if it has no more TDs. */ if (!intrq->remaining_tds) free(intrq); } else { /* Save done TD to be processed. */ td->next = temp_tdq; temp_tdq = td; } break; } default: break; } ++i; } if (spew_debug) usb_debug("Processed %d done TDs.\n", i); j = 0; /* Process interrupt queue TDs in right order. */ while (temp_tdq) { /* Save pointer of current TD and advance. */ intrq_td_t *const cur_td = temp_tdq; temp_tdq = temp_tdq->next; /* The interrupt queue for the current TD. */ intr_queue_t *const intrq = cur_td->intrq; /* Append to interrupt queue. */ if (!intrq->head) { /* First element. */ intrq->head = intrq->tail = cur_td; } else { /* Insert at tail. */ intrq->tail->next = cur_td; intrq->tail = cur_td; } /* It's always the last element. */ cur_td->next = NULL; ++j; } if (spew_debug) usb_debug("processed %d done tds, %d intr tds thereof.\n", i, j); return result; }