# Supermicro X11SSM-F This section details how to run coreboot on the [Supermicro X11SSM-F]. ## Flashing coreboot The flash IC [MX25L12873F] can be found near PCH PCIe Slot 4. The board can be flashed externally with a SOIC test clip or probes. Since there is no diode between VCC3.3 and the flash chip, so VCC must **not** be connected. Instead, the flash chip is powered from VCC3.3, which is always-on (even in S5). WP# and HOLD# have pull-ups and don't need to be connected. FTDI FT2232H and FT232H based programmers worked. Flashing is also possible through the BMC web interface, when a valid license was entered. ## BMC (IPMI) This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC firmware resides in a 32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a [MX25L25635F]. ## Disabling LAN firmware To disable the proprietary LAN firmware, the undocumented jumper J6 can be set to 2-3. ## Tested and working - GRUB2 payload with Debian testing and kernel 5.2 - ECC ram (Linux' ie31200 driver works) - USB ports - Ethernet - SATA ports - RS232 external - PCIe slots - BMC (IPMI) - VGA on Aspeed - TPM on TPM expansion header ## Known issues - See general issue section - LNXTHERM missing - S3 resume not working ## Technology ```{eval-rst} +------------------+--------------------------------------------------+ | CPU | Intel Kaby Lake | +------------------+--------------------------------------------------+ | PCH | Intel C236 | +------------------+--------------------------------------------------+ | Coprocessor | Intel SPS (server version of the ME) | +------------------+--------------------------------------------------+ | Super I/O | ASPEED AST2400 | +------------------+--------------------------------------------------+ | Ethernet | 2x Intel I210-AT 1 GbE | | | 1x dedicated BMC | +------------------+--------------------------------------------------+ | PCIe slots | 1x 3.0 x8 | | | 1x 3.0 x8 (in x16) | | | 2x 3.0 x4 (in x8) | +------------------+--------------------------------------------------+ | USB slots | 2x USB 2.0 (ext) | | | 2x USB 3.0 (ext) | | | 1x USB 3.0 (int) | | | 1x dual USB 3.0 header | | | 2x dual USB 2.0 header | +------------------+--------------------------------------------------+ | SATA slots | 8x S-ATA III | +------------------+--------------------------------------------------+ | Other slots | 1x RS232 (ext) | | | 1x RS232 header | | | 1x TPM header | | | 1x Power SMB header | | | 5x PWM Fan connector | | | 2x I-SGPIO | | | 2x S-ATA DOM Power connector | | | 1x XDP Port | | | 1x External BMC I2C Header (for IPMI card) | | | 1x Chassis Intrusion Header | +------------------+--------------------------------------------------+ ``` ## Extra links - [Supermicro X11SSM-F] - [Board manual] [Supermicro X11SSM-F]: https://www.supermicro.com/en/products/motherboard/X11SSM-F [Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1785.pdf [AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376 [IPMI]: ../../../../drivers/ipmi_kcs.md [MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf [MX25L12873F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L12873F.pdf