Intel® Galileo Gen 2 Development Board

Warning: Use of the Intel® Galileo Gen 2 mainboard code requires modification of the util/xcompile/xcompile file to change the machine architecture from i686 to i586 because the Quark™ processor does not support the instructions introduced with the Pentium™ 6 architecture. Edit the file util/xcompile/xcompile Search for -march Replace i686 with i586 Save the result Without this change the Quark™ processor will halt when it executes one of the instructions introduced with the Pentium™ 6 architecture. The Intel® Galileo Gen 2 mainboard code was developed along with the Intel® Quark™ SoC: Overall development SoC support FSP 1.1 integration Board support

Galileo Gen 2 Board Documentation

• Block Diagram
• Getting Started
• Overview
• Port Diagram
• Product Brief
• Schematic
• User Guide
• Components
  • A/D: Texas Instruments ADC108S102
  • Analog Switch: Texas Instruments TS5A23159
  • Ethernet (10/100 MB/S): Texas Instruments DP83848
  • Load Switch: Texas Instruments TPS22920x
  • Memory (256 MiB): Micron MT41K128M8
  • SoC: Intel® Quark™ X-1000
  • Serial EEPROM (1 KiB): ON Semiconductor® CAT24C08
  • SPI Flash (8 MiB): Winbond™ W25Q64FV
  • Step Down Converter: Texas Instruments TPS62130
  • Step Down Converter: Texas Instruments TPS652510
  • Termination Regulator: Texas Instruments TPS51200

Debug Tools

• Flash Programmer:
  • Dediprog SF100 ISP IC Programmer
• JTAG Connector: Olimex ARM-JTAG-20-10
• JTAG Debugger:
  • Olimex LTD ARM-USB-OCD-H
  • Tincan Tools Flyswatter2
• Hardware Setup and Software Installation
• USB Serial cable: FTDI TTL-232R-3V3

Modified: 30 January 2016