From 4172efc17f4185d1762f6d3d2aa3e1f4b2594499 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Thu, 5 Nov 2009 17:24:03 +0000 Subject: biosemu (non-yabel) cleanup * Drop pcbios folder that only exists for a single function * include int1a handler in biosemu.c * Wipe a lot of dead code, and set up F segment correctly * include return value check from yabel. On the long run we should teach yabel to be able to run with a reduced feature set, ie. no emulation of (almost) all system hardware. Then we could drop the non-yabel x86emu. But for now this patch cleans up the non-yabel biosemu.c to a state where it's not all that ugly anymore.. Signed-off-by: Stefan Reinauer Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4915 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- util/x86emu/Config.lb | 1 - util/x86emu/Makefile | 2 +- util/x86emu/Makefile.inc | 1 - util/x86emu/biosemu.c | 572 ++++++++++++++++++++++++++-------------- util/x86emu/pcbios/Config.lb | 1 - util/x86emu/pcbios/Makefile.inc | 1 - util/x86emu/pcbios/pcibios.c | 185 ------------- util/x86emu/pcbios/pcibios.h | 70 ----- 8 files changed, 382 insertions(+), 451 deletions(-) delete mode 100644 util/x86emu/pcbios/Config.lb delete mode 100644 util/x86emu/pcbios/Makefile.inc delete mode 100644 util/x86emu/pcbios/pcibios.c delete mode 100644 util/x86emu/pcbios/pcibios.h (limited to 'util') diff --git a/util/x86emu/Config.lb b/util/x86emu/Config.lb index e5b4b3a231..85d21e7292 100644 --- a/util/x86emu/Config.lb +++ b/util/x86emu/Config.lb @@ -11,7 +11,6 @@ else object x86_asm.S else object biosemu.o - dir pcbios dir x86emu end end diff --git a/util/x86emu/Makefile b/util/x86emu/Makefile index ee5982d248..a7b21d119a 100644 --- a/util/x86emu/Makefile +++ b/util/x86emu/Makefile @@ -22,7 +22,7 @@ X86EMU_SRC = debug.c decode.c fpu.c ops.c ops2.c prim_ops.c sys.c ifeq ($(CONFIG_PCI_OPTION_ROM_RUN_X86EMU),y) -BIOSEMU_SRC = biosemu.c pcbios/pcibios.c +BIOSEMU_SRC = biosemu.c endif ifeq ($(CONFIG_PCI_OPTION_ROM_RUN_YABEL),y) diff --git a/util/x86emu/Makefile.inc b/util/x86emu/Makefile.inc index b5c3eb4b7c..d71d3c76bc 100644 --- a/util/x86emu/Makefile.inc +++ b/util/x86emu/Makefile.inc @@ -20,7 +20,6 @@ subdirs-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += x86emu obj-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += biosemu.o -subdirs-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += pcbios obj-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += x86.o obj-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += x86_asm.o diff --git a/util/x86emu/biosemu.c b/util/x86emu/biosemu.c index e91343603f..c773539c3e 100644 --- a/util/x86emu/biosemu.c +++ b/util/x86emu/biosemu.c @@ -36,6 +36,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #ifdef CONFIG_COREBOOT_V2 #include #include @@ -47,10 +48,39 @@ #include #include #include - #include +#include "x86emu/prim_ops.h" + +#define DATA_SEGMENT 0x2000 +#define STACK_SEGMENT 0x1000 //1000:xxxx +#define STACK_START_OFFSET 0xfffe +#define INITIAL_EBDA_SEGMENT 0xF600 // segment of the Extended BIOS Data Area +#define INITIAL_EBDA_SIZE 0x400 // size of the EBDA (at least 1KB!! since size is stored in KB!) + +enum { + PCI_BIOS_PRESENT = 0xB101, + FIND_PCI_DEVICE = 0xB102, + FIND_PCI_CLASS_CODE = 0xB103, + GENERATE_SPECIAL_CYCLE = 0xB106, + READ_CONFIG_BYTE = 0xB108, + READ_CONFIG_WORD = 0xB109, + READ_CONFIG_DWORD = 0xB10A, + WRITE_CONFIG_BYTE = 0xB10B, + WRITE_CONFIG_WORD = 0xB10C, + WRITE_CONFIG_DWORD = 0xB10D, + GET_IRQ_ROUTING_OPTIONS = 0xB10E, + SET_PCI_IRQ = 0xB10F +}; -#include "pcbios/pcibios.h" +enum { + SUCCESSFUL = 0x00, + FUNC_NOT_SUPPORTED = 0x81, + BAD_VENDOR_ID = 0x83, + DEVICE_NOT_FOUND = 0x86, + BAD_REGISTER_NUMBER = 0x87, + SET_FAILED = 0x88, + BUFFER_TOO_SMALL = 0x89 +}; #define MEM_WB(where, what) wrb(where, what) #define MEM_WW(where, what) wrw(where, what) @@ -60,44 +90,7 @@ #define MEM_RW(where) rdw(where) #define MEM_RL(where) rdl(where) -u8 x_inb(u16 port); -u16 x_inw(u16 port); -void x_outb(u16 port, u8 val); -void x_outw(u16 port, u16 val); -u32 x_inl(u16 port); -void x_outl(u16 port, u32 val); - -// -void X86EMU_setMemBase(void *base, size_t size); - -/* general software interrupt handler */ -u32 getIntVect(int num) -{ - return MEM_RW(num << 2) + (MEM_RW((num << 2) + 2) << 4); -} - -/* FIXME: There is already a push_word() in the emulator */ -void pushw(u16 val) -{ - X86_ESP -= 2; - MEM_WW(((u32) X86_SS << 4) + X86_SP, val); -} - -int run_bios_int(int num) -{ - u32 eflags; - - eflags = X86_EFLAGS; - pushw(eflags); - pushw(X86_CS); - pushw(X86_IP); - X86_CS = MEM_RW((num << 2) + 2); - X86_IP = MEM_RW(num << 2); - - return 1; -} - -u8 x_inb(u16 port) +static u8 biosemu_inb(u16 port) { u8 val; @@ -110,7 +103,7 @@ u8 x_inb(u16 port) return val; } -u16 x_inw(u16 port) +static u16 biosemu_inw(u16 port) { u16 val; @@ -122,7 +115,7 @@ u16 x_inw(u16 port) return val; } -u32 x_inl(u16 port) +static u32 biosemu_inl(u16 port) { u32 val; @@ -134,7 +127,7 @@ u32 x_inl(u16 port) return val; } -void x_outb(u16 port, u8 val) +static void biosemu_outb(u16 port, u8 val) { #ifdef CONFIG_DEBUG if (port != 0x43) @@ -143,7 +136,7 @@ void x_outb(u16 port, u8 val) outb(val, port); } -void x_outw(u16 port, u16 val) +static void biosemu_outw(u16 port, u16 val) { #ifdef CONFIG_DEBUG printk("outw(0x%04x, 0x%04x)\n", val, port); @@ -151,7 +144,7 @@ void x_outw(u16 port, u16 val) outw(val, port); } -void x_outl(u16 port, u32 val) +static void biosemu_outl(u16 port, u32 val) { #ifdef CONFIG_DEBUG printk("outl(0x%08x, 0x%04x)\n", val, port); @@ -159,23 +152,245 @@ void x_outl(u16 port, u32 val) outl(val, port); } -X86EMU_pioFuncs myfuncs = { - x_inb, x_inw, x_inl, - x_outb, x_outw, x_outl +static X86EMU_pioFuncs biosemu_piofuncs = { + biosemu_inb, biosemu_inw, biosemu_inl, + biosemu_outb, biosemu_outw, biosemu_outl }; +/* Interrupt Handlers */ + +static int int15_handler(void) +{ + /* This int15 handler is VIA Tech. and Intel specific. Other chipsets need other + * handlers. The right way to do this is to move this handler code into + * the mainboard or northbridge code. + */ + switch (X86_AX) { + case 0x5f19: + X86_EFLAGS |= FB_CF; /* set carry flag */ + break; + case 0x5f18: + X86_EAX = 0x5f; + // MCLK = 133, 32M frame buffer, 256 M main memory + X86_EBX = 0x545; + X86_ECX = 0x060; + X86_EFLAGS &= ~FB_CF; + break; + case 0x5f00: + X86_EAX = 0x8600; + X86_EFLAGS |= FB_CF; /* set carry flag */ + break; + case 0x5f01: + X86_EAX = 0x5f; + X86_ECX = (X86_ECX & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768 + X86_EFLAGS &= ~FB_CF; + break; + case 0x5f02: + X86_EAX = 0x5f; + X86_EBX = (X86_EBX & 0xffff0000) | 2; + X86_ECX = (X86_ECX & 0xffff0000) | 0x401; // PAL + crt only + X86_EDX = (X86_EDX & 0xffff0000) | 0; // TV Layout - default + X86_EFLAGS &= ~FB_CF; + break; + case 0x5f0f: + X86_EAX = 0x860f; + X86_EFLAGS |= FB_CF; /* set carry flag */ + break; + /* And now Intel IGD code */ +#define BOOT_DISPLAY_DEFAULT 0 +#define BOOT_DISPLAY_CRT (1 << 0) +#define BOOT_DISPLAY_TV (1 << 1) +#define BOOT_DISPLAY_EFP (1 << 2) +#define BOOT_DISPLAY_LCD (1 << 3) +#define BOOT_DISPLAY_CRT2 (1 << 4) +#define BOOT_DISPLAY_TV2 (1 << 5) +#define BOOT_DISPLAY_EFP2 (1 << 6) +#define BOOT_DISPLAY_LCD2 (1 << 7) + + case 0x5f35: + X86_EAX = 0x5f; + X86_ECX = BOOT_DISPLAY_DEFAULT; + X86_EFLAGS &= ~FB_CF; + break; + case 0x5f40: + X86_EAX = 0x5f; + X86_ECX = 3; // This is mainboard specific + printk("DISPLAY=%x\n", X86_ECX); + X86_EFLAGS &= ~FB_CF; + break; + default: + printk("Unknown INT15 function %04x!\n", X86_AX); + X86_EFLAGS |= FB_CF; /* set carry flag */ + } + + return 1; +} + +static int int1a_handler(void) +{ + int ret = 0; + struct device *dev = 0; + + switch (X86_AX) { + case PCI_BIOS_PRESENT: + X86_AH = 0x00; /* no config space/special cycle support */ + X86_AL = 0x01; /* config mechanism 1 */ + X86_EDX = 'P' | 'C' << 8 | 'I' << 16 | ' ' << 24; + X86_EBX = 0x0210; /* Version 2.10 */ + X86_ECX = 0xFF00; /* FIXME: Max bus number */ + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + break; + case FIND_PCI_DEVICE: + /* FIXME: support SI != 0 */ +#ifdef CONFIG_COREBOOT_V2 + dev = dev_find_device(X86_DX, X86_CX, dev); +#else + dev = dev_find_pci_device(X86_DX, X86_CX, dev); +#endif + if (dev != 0) { + X86_BH = dev->bus->secondary; + X86_BL = dev->path.pci.devfn; + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case FIND_PCI_CLASS_CODE: + /* FixME: support SI != 0 */ + dev = dev_find_class(X86_ECX, dev); + if (dev != 0) { + X86_BH = dev->bus->secondary; + X86_BL = dev->path.pci.devfn; + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case READ_CONFIG_BYTE: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + X86_CL = pci_read_config8(dev, X86_DI); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case READ_CONFIG_WORD: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + X86_CX = pci_read_config16(dev, X86_DI); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case READ_CONFIG_DWORD: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + X86_ECX = pci_read_config32(dev, X86_DI); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case WRITE_CONFIG_BYTE: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + pci_write_config8(dev, X86_DI, X86_CL); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case WRITE_CONFIG_WORD: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + pci_write_config16(dev, X86_DI, X86_CX); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + case WRITE_CONFIG_DWORD: + dev = dev_find_slot(X86_BH, X86_BL); + if (dev != 0) { + pci_write_config16(dev, X86_DI, X86_ECX); + X86_AH = SUCCESSFUL; + X86_EFLAGS &= ~FB_CF; /* clear carry flag */ + ret = 1; + } else { + X86_AH = DEVICE_NOT_FOUND; + X86_EFLAGS |= FB_CF; /* set carry flag */ + ret = 0; + } + break; + default: + X86_AH = FUNC_NOT_SUPPORTED; + X86_EFLAGS |= FB_CF; + break; + } + return ret; +} /* Interrupt multiplexer */ -void do_int(int num) +/* Find base address of interrupt handler */ +static u32 getIntVect(int num) +{ + return MEM_RW(num << 2) + (MEM_RW((num << 2) + 2) << 4); +} + +static int run_bios_int(int num) +{ + u32 eflags; + + eflags = X86_EFLAGS; + push_word(eflags); + push_word(X86_CS); + push_word(X86_IP); + X86_CS = MEM_RW((num << 2) + 2); + X86_IP = MEM_RW(num << 2); + + return 1; +} + +static void do_int(int num) { int ret = 0; - printk("int%x vector at %x\n", num, getIntVect(num)); + printk("int%x (AX=%04x) vector at %x\n", num, X86_AX, getIntVect(num)); switch (num) { -#ifndef _PC case 0x10: case 0x42: case 0x6D: @@ -188,9 +403,8 @@ void do_int(int num) ret = 1; } break; -#endif case 0x15: - //ret = int15_handler(); + ret = int15_handler(); ret = 1; break; case 0x16: @@ -198,7 +412,7 @@ void do_int(int num) ret = 0; break; case 0x1A: - ret = pcibios_handler(); + ret = int1a_handler(); ret = 1; break; case 0xe6: @@ -214,158 +428,123 @@ void do_int(int num) } -#if 0 -#define SYS_BIOS 0xf0000 /* * here we are really paranoid about faking a "real" * BIOS. Most of this information was pulled from * dosemu. */ -#if 0 -void setup_int_vect(void) +static void setup_system_bios(void) { int i; - /* let the int vects point to the SYS_BIOS seg */ - for (i = 0; i < 0x80; i++) { - MEM_WW(i << 2, 0); - MEM_WW((i << 2) + 2, SYS_BIOS >> 4); - } - - reset_int_vect(); + /* Set up Interrupt Vectors. The IVT starts at 0x0000:0x0000 + * Additionally, we put some stub code into the F segment for + * those pesky little buggers that jmp to the hard coded addresses + * instead of calling int XX. This stub code looks like this + * + * CD XX int 0xXX + * C3 ret + * F4 hlt + */ - /* font tables default location (int 1F) */ - MEM_WW(0x1f << 2, 0xfa6e); - /* int 11 default location (Get Equipment Configuration) */ - MEM_WW(0x11 << 2, 0xf84d); - /* int 12 default location (Get Conventional Memory Size) */ - MEM_WW(0x12 << 2, 0xf841); - /* int 15 default location (I/O System Extensions) */ - MEM_WW(0x15 << 2, 0xf859); - /* int 1A default location (RTC, PCI and others) */ - MEM_WW(0x1a << 2, 0xff6e); /* int 05 default location (Bound Exceeded) */ - MEM_WW(0x05 << 2, 0xff54); + MEM_WL(0x05 << 2, 0xf000ff54); + MEM_WL(0xfff54, 0xf4c305cd); /* int 08 default location (Double Fault) */ - MEM_WW(0x08 << 2, 0xfea5); - /* int 13 default location (Disk) */ - MEM_WW(0x13 << 2, 0xec59); + MEM_WL(0x08 << 2, 0xf000fea5); + MEM_WL(0xffea5, 0xf4c308cd); /* int 0E default location (Page Fault) */ - MEM_WW(0x0e << 2, 0xef57); + MEM_WL(0x0e << 2, 0xf000ef57); + MEM_WL(0xfef57, 0xf4c30ecd); + /* int 10 default location */ + MEM_WL(0x10 << 2, 0xf000f065); + MEM_WL(0xff065, 0xf4c310cd); + /* int 11 default location (Get Equipment Configuration) */ + MEM_WL(0x11 << 2, 0xf000f84d); + MEM_WL(0xff84d, 0xf4c311cd); + /* int 12 default location (Get Conventional Memory Size) */ + MEM_WL(0x12 << 2, 0xf000f841); + MEM_WL(0xff841, 0xf4c312cd); + /* int 13 default location (Disk) */ + MEM_WL(0x13 << 2, 0xf000ec59); + MEM_WL(0xfec59, 0xf4c313cd); + /* int 14 default location (Disk) */ + MEM_WL(0x14 << 2, 0xf000e739); + MEM_WL(0xfe739, 0xf4c314cd); + /* int 15 default location (I/O System Extensions) */ + MEM_WL(0x15 << 2, 0xf000f859); + MEM_WL(0xf859, 0xf4c315cd); + /* int 16 default location */ + MEM_WL(0x16 << 2, 0xf000e82e); + MEM_WL(0xfe82e, 0xf4c316cd); /* int 17 default location (Parallel Port) */ - MEM_WW(0x17 << 2, 0xefd2); - /* fdd table default location (int 1e) */ - MEM_WW(0x1e << 2, 0xefc7); - - /* Set Equipment flag to VGA */ - i = MEM_RB(0x0410) & 0xCF; - MEM_WB(0x0410, i); - /* XXX Perhaps setup more of the BDA here. See also int42(0x00). */ -} - -int setup_system_bios(void *base_addr) -{ - char *base = (char *) base_addr; - - /* - * we trap the "industry standard entry points" to the BIOS - * and all other locations by filling them with "hlt" - * TODO: implement hlt-handler for these - */ - memset(base, 0xf4, 0x10000); - - /* set bios date */ - //strcpy(base + 0x0FFF5, "06/11/99"); + MEM_WL(0x17 << 2, 0xf000efd2); + MEM_WL(0xfefd2, 0xf4c317cd); + /* int 1A default location (RTC, PCI and others) */ + MEM_WL(0x1a << 2, 0xf000fe6e); + MEM_WL(0xffe6e, 0xf4c31acd); + /* int 1E default location (FDD table) */ + MEM_WL(0x1e << 2, 0xf000efc7); + MEM_WL(0xfefc7, 0xf4c31ecd); + /* font tables default location (int 1F) */ + MEM_WL(0x1f << 2, 0xf000fa6e); + MEM_WL(0xffa6e, 0xf4c31fcd); + /* int 42 default location */ + MEM_WL(0x42 << 2, 0xf000f065); + /* int 6D default location */ + MEM_WL(0x6D << 2, 0xf000f065); + + /* Clear EBDA */ + for (i=(INITIAL_EBDA_SEGMENT << 4); + i<(INITIAL_EBDA_SEGMENT << 4) + INITIAL_EBDA_SIZE; i++) + MEM_WB(i, 0); + /* at offset 0h in EBDA is the size of the EBDA in KB */ + MEM_WW((INITIAL_EBDA_SEGMENT << 4) + 0x0, INITIAL_EBDA_SIZE / 1024); + + /* Clear BDA */ + for (i=0x400; i<0x500; i+=4) + MEM_WL(i, 0); + + /* Set up EBDA */ + MEM_WW(0x40e, INITIAL_EBDA_SEGMENT); + + /* Set RAM size to 16MB (fake) */ + MEM_WW(0x413, 16384); + + // TODO Set up more of BDA here + + /* setup original ROM BIOS Area (F000:xxxx) */ + const char *date = "06/23/99"; + for (i = 0; date[i]; i++) + MEM_WB(0xffff5 + i, date[i]); /* set up eisa ident string */ - //strcpy(base + 0x0FFD9, "PCI_ISA"); - /* write system model id for IBM-AT */ - //*((unsigned char *) (base + 0x0FFFE)) = 0xfc; - - return 1; + const char *ident = "PCI_ISA"; + for (i = 0; ident[i]; i++) + MEM_WB(0xfffd9 + i, ident[i]); + + // write system model id for IBM-AT + // according to "Ralf Browns Interrupt List" Int15 AH=C0 Table 515, + // model FC is the original AT and also used in all DOSEMU Versions. + MEM_WB(0xFFFFE, 0xfc); } -#endif - -void reset_int_vect(void) -{ - /* - * This table is normally located at 0xF000:0xF0A4. However, int 0x42, - * function 0 (Mode Set) expects it (or a copy) somewhere in the bottom - * 64kB. Note that because this data doesn't survive POST, int 0x42 should - * only be used during EGA/VGA BIOS initialisation. - */ - static const u8 VideoParms[] = { - /* Timing for modes 0x00 & 0x01 */ - 0x38, 0x28, 0x2d, 0x0a, 0x1f, 0x06, 0x19, 0x1c, - 0x02, 0x07, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - /* Timing for modes 0x02 & 0x03 */ - 0x71, 0x50, 0x5a, 0x0a, 0x1f, 0x06, 0x19, 0x1c, - 0x02, 0x07, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - /* Timing for modes 0x04, 0x05 & 0x06 */ - 0x38, 0x28, 0x2d, 0x0a, 0x7f, 0x06, 0x64, 0x70, - 0x02, 0x01, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00, - /* Timing for mode 0x07 */ - 0x61, 0x50, 0x52, 0x0f, 0x19, 0x06, 0x19, 0x19, - 0x02, 0x0d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00, - /* Display page lengths in little endian order */ - 0x00, 0x08, /* Modes 0x00 and 0x01 */ - 0x00, 0x10, /* Modes 0x02 and 0x03 */ - 0x00, 0x40, /* Modes 0x04 and 0x05 */ - 0x00, 0x40, /* Modes 0x06 and 0x07 */ - /* Number of columns for each mode */ - 40, 40, 80, 80, 40, 40, 80, 80, - /* CGA Mode register value for each mode */ - 0x2c, 0x28, 0x2d, 0x29, 0x2a, 0x2e, 0x1e, 0x29, - /* Padding */ - 0x00, 0x00, 0x00, 0x00 - }; - int i; - - for (i = 0; i < sizeof(VideoParms); i++) - MEM_WB(i + (0x1000 - sizeof(VideoParms)), VideoParms[i]); - MEM_WW(0x1d << 2, 0x1000 - sizeof(VideoParms)); - MEM_WW((0x1d << 2) + 2, 0); - - printk(BIOS_DEBUG,"SETUP INT\n"); - MEM_WW(0x10 << 2, 0xf065); - MEM_WW((0x10 << 2) + 2, SYS_BIOS >> 4); - MEM_WW(0x42 << 2, 0xf065); - MEM_WW((0x42 << 2) + 2, SYS_BIOS >> 4); - MEM_WW(0x6D << 2, 0xf065); - MEM_WW((0x6D << 2) + 2, SYS_BIOS >> 4); -} -#endif +#define BIOSEMU_MEM_BASE 0x00000000 +#define BIOSEMU_MEM_SIZE 0x00100000 void run_bios(struct device * dev, unsigned long addr) { -#if 1 int i; - unsigned short initialcs = (addr & 0xF0000) >> 4; - unsigned short initialip = (addr + 3) & 0xFFFF; - unsigned short devfn = dev->bus->secondary << 8 | dev->path.pci.devfn; - + u16 initialcs = (addr & 0xF0000) >> 4; + u16 initialip = (addr + 3) & 0xFFFF; + u16 devfn = (dev->bus->secondary << 8) | dev->path.pci.devfn; X86EMU_intrFuncs intFuncs[256]; - X86EMU_setMemBase(0, 0x100000); - X86EMU_setupPioFuncs(&myfuncs); + X86EMU_setMemBase(BIOSEMU_MEM_BASE, BIOSEMU_MEM_SIZE); + X86EMU_setupPioFuncs(&biosemu_piofuncs); for (i = 0; i < 256; i++) intFuncs[i] = do_int; X86EMU_setupIntrFuncs(intFuncs); - { - char *date = "01/01/99"; - for (i = 0; date[i]; i++) - wrb(0xffff5 + i, date[i]); - wrb(0xffff7, '/'); - wrb(0xffffa, '/'); - } - - { - /* FixME: move PIT init to its own file */ - outb(0x36, 0x43); - outb(0x00, 0x40); - outb(0x00, 0x40); - } - //setup_int_vect(); + setup_system_bios(); /* cpu setup */ X86_AX = devfn ? devfn : 0xff; @@ -374,26 +553,37 @@ void run_bios(struct device * dev, unsigned long addr) X86_CS = initialcs; /* Initialize stack and data segment */ - X86_SS = initialcs; - X86_SP = 0xfffe; - X86_DS = 0x0040; - X86_ES = 0x0000; + X86_SS = STACK_SEGMENT; + X86_SP = STACK_START_OFFSET;; + X86_DS = DATA_SEGMENT; /* We need a sane way to return from bios * execution. A hlt instruction and a pointer * to it, both kept on the stack, will do. */ - pushw(0xf4f4); /* hlt; hlt */ - pushw(X86_SS); - pushw(X86_SP + 2); + push_word(0xf4f4); /* hlt; hlt */ + push_word(X86_SS); + push_word(X86_SP + 2); #ifdef CONFIG_DEBUG //X86EMU_trace_on(); #endif - printk("entering emulator\n"); + printk("Executing Initialization Vector...\n"); X86EMU_exec(); - printk("exited emulator\n"); + printk("Option ROM Exit Status: %04x\n", X86_AX); -#endif + /* Check whether the stack is "clean" i.e. containing the HLT + * instruction we pushed before executing and pointing to the original + * stack address... indicating that the initialization probably was + * successful + */ + if ((pop_word() == 0xf4f4) && (X86_SS == STACK_SEGMENT) + && (X86_SP == STACK_START_OFFSET)) { + printk("Stack is clean, initialization successfull!\n"); + } else { + printk("Stack unclean, initialization probably NOT COMPLETE!!\n"); + printk("SS:SP = %04x:%04x, expected: %04x:%04x\n", + X86_SS, X86_SP, STACK_SEGMENT, STACK_START_OFFSET); + } } diff --git a/util/x86emu/pcbios/Config.lb b/util/x86emu/pcbios/Config.lb deleted file mode 100644 index 231b6629b5..0000000000 --- a/util/x86emu/pcbios/Config.lb +++ /dev/null @@ -1 +0,0 @@ -object pcibios.o \ No newline at end of file diff --git a/util/x86emu/pcbios/Makefile.inc b/util/x86emu/pcbios/Makefile.inc deleted file mode 100644 index 35d2d97adb..0000000000 --- a/util/x86emu/pcbios/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -obj-y += pcibios.o diff --git a/util/x86emu/pcbios/pcibios.c b/util/x86emu/pcbios/pcibios.c deleted file mode 100644 index 506aad0786..0000000000 --- a/util/x86emu/pcbios/pcibios.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * This software and ancillary information (herein called SOFTWARE ) - * called LinuxBIOS is made available under the terms described - * here. The SOFTWARE has been approved for release with associated - * LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has - * been authored by an employee or employees of the University of - * California, operator of the Los Alamos National Laboratory under - * Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The - * U.S. Government has rights to use, reproduce, and distribute this - * SOFTWARE. The public may copy, distribute, prepare derivative works - * and publicly display this SOFTWARE without charge, provided that this - * Notice and any statement of authorship are reproduced on all copies. - * Neither the Government nor the University makes any warranty, express - * or implied, or assumes any liability or responsibility for the use of - * this SOFTWARE. If SOFTWARE is modified to produce derivative works, - * such modified SOFTWARE should be clearly marked, so as not to confuse - * it with the version available from LANL. - */ - /* - * This file is part of the coreboot project. - * - * (c) Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifdef CONFIG_COREBOOT_V2 -#include -#else -#include -#endif -#include -#include -#include -#include -#include - -#include "pcibios.h" - -int pcibios_handler(void) -{ - int ret = 0; - struct device *dev = 0; - - switch (X86_AX) { - case PCI_BIOS_PRESENT: - X86_AH = 0x00; /* no config space/special cycle support */ - X86_AL = 0x01; /* config mechanism 1 */ - X86_EDX = 'P' | 'C' << 8 | 'I' << 16 | ' ' << 24; - X86_EBX = 0x0210; /* Version 2.10 */ - X86_ECX = 0xFF00; /* FixME: Max bus number */ - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - break; - case FIND_PCI_DEVICE: - /* FixME: support SI != 0 */ -#ifdef CONFIG_COREBOOT_V2 - dev = dev_find_device(X86_DX, X86_CX, dev); -#else - dev = dev_find_pci_device(X86_DX, X86_CX, dev); -#endif - if (dev != 0) { - X86_BH = dev->bus->secondary; - X86_BL = dev->path.pci.devfn; - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case FIND_PCI_CLASS_CODE: - /* FixME: support SI != 0 */ - dev = dev_find_class(X86_ECX, dev); - if (dev != 0) { - X86_BH = dev->bus->secondary; - X86_BL = dev->path.pci.devfn; - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case READ_CONFIG_BYTE: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - X86_CL = pci_read_config8(dev, X86_DI); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case READ_CONFIG_WORD: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - X86_CX = pci_read_config16(dev, X86_DI); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case READ_CONFIG_DWORD: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - X86_ECX = pci_read_config32(dev, X86_DI); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case WRITE_CONFIG_BYTE: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - pci_write_config8(dev, X86_DI, X86_CL); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case WRITE_CONFIG_WORD: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - pci_write_config16(dev, X86_DI, X86_CX); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - case WRITE_CONFIG_DWORD: - dev = dev_find_slot(X86_BH, X86_BL); - if (dev != 0) { - pci_write_config16(dev, X86_DI, X86_ECX); - X86_AH = SUCCESSFUL; - X86_EFLAGS &= ~FB_CF; /* clear carry flag */ - ret = 1; - } else { - X86_AH = DEVICE_NOT_FOUND; - X86_EFLAGS |= FB_CF; /* set carry flag */ - ret = 0; - } - break; - default: - X86_AH = FUNC_NOT_SUPPORTED; - X86_EFLAGS |= FB_CF; - break; - } - - return ret; -} diff --git a/util/x86emu/pcbios/pcibios.h b/util/x86emu/pcbios/pcibios.h deleted file mode 100644 index 0ee19112f7..0000000000 --- a/util/x86emu/pcbios/pcibios.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This software and ancillary information (herein called SOFTWARE ) - * called LinuxBIOS is made available under the terms described - * here. The SOFTWARE has been approved for release with associated - * LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has - * been authored by an employee or employees of the University of - * California, operator of the Los Alamos National Laboratory under - * Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The - * U.S. Government has rights to use, reproduce, and distribute this - * SOFTWARE. The public may copy, distribute, prepare derivative works - * and publicly display this SOFTWARE without charge, provided that this - * Notice and any statement of authorship are reproduced on all copies. - * Neither the Government nor the University makes any warranty, express - * or implied, or assumes any liability or responsibility for the use of - * this SOFTWARE. If SOFTWARE is modified to produce derivative works, - * such modified SOFTWARE should be clearly marked, so as not to confuse - * it with the version available from LANL. - */ - /* - * This file is part of the coreboot project. - * - * (c) Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef PCI_BIOS_H -#define PCI_BIOS_H - -enum { - PCI_BIOS_PRESENT = 0xB101, - FIND_PCI_DEVICE = 0xB102, - FIND_PCI_CLASS_CODE = 0xB103, - GENERATE_SPECIAL_CYCLE = 0xB106, - READ_CONFIG_BYTE = 0xB108, - READ_CONFIG_WORD = 0xB109, - READ_CONFIG_DWORD = 0xB10A, - WRITE_CONFIG_BYTE = 0xB10B, - WRITE_CONFIG_WORD = 0xB10C, - WRITE_CONFIG_DWORD = 0xB10D, - GET_IRQ_ROUTING_OPTIONS = 0xB10E, - SET_PCI_IRQ = 0xB10F -}; - -enum { - SUCCESSFUL = 0x00, - FUNC_NOT_SUPPORTED = 0x81, - BAD_VENDOR_ID = 0x83, - DEVICE_NOT_FOUND = 0x86, - BAD_REGISTER_NUMBER = 0x87, - SET_FAILED = 0x88, - BUFFER_TOO_SMALL = 0x89 -}; - -int pcibios_handler(void); - -#endif /* PCI_BIOS_H */ - -- cgit v1.2.3