From 2c439adb51ca8323b55d759e2a45b71a6187a9da Mon Sep 17 00:00:00 2001 From: Reka Norman Date: Thu, 7 Oct 2021 16:08:18 +1100 Subject: util/spd_tools: Add LP5 support for ADL Add LP5 support to spd_tools. Currently, only Intel Alder Lake (ADL) is supported. The SPDs are generated based on a combination of: - The LPDDR5 spec JESD209-5B. - The SPD spec SPD4.1.2.M-2 (the LPDDR3/4 spec is used since JEDEC has not released an SPD spec for LPDDR5). - Intel recommendations in advisory #616599. BUG=b:201234943, b:198704251 TEST=Generate the SPD and manifests for a test part, and check that the SPD matches Intel's expectation. More details in CB:58680. Change-Id: Ic1e68d44f7c0ad64aa9904b7e1297d24bd5db56e Signed-off-by: Reka Norman Reviewed-on: https://review.coreboot.org/c/coreboot/+/58679 Tested-by: build bot (Jenkins) Reviewed-by: Karthik Ramasubramanian --- util/spd_tools/README.md | 97 ++++ util/spd_tools/src/part_id_gen/part_id_gen.go | 1 + util/spd_tools/src/spd_gen/lp5.go | 617 ++++++++++++++++++++++++++ util/spd_tools/src/spd_gen/spd_gen.go | 17 +- 4 files changed, 726 insertions(+), 6 deletions(-) create mode 100644 util/spd_tools/src/spd_gen/lp5.go (limited to 'util/spd_tools') diff --git a/util/spd_tools/README.md b/util/spd_tools/README.md index 5be666bde4..a422017581 100644 --- a/util/spd_tools/README.md +++ b/util/spd_tools/README.md @@ -8,6 +8,9 @@ The memory technologies currently supported are: * LPDDR4x - based on the JESD209-4C spec and Intel recommendations (docs #616599, #610202, #634730). * DDR4 - based on the JESD79-4C and Jedec 4.1.2.L-5 R29 v103 specs. +* LPDDR5 - based on the LPDDR5 spec JESD209-5B, the SPD spec SPD4.1.2.M-2 (the + LPDDR3/4 spec is used since JEDEC has not released an SPD spec for LPDDR5), + and Intel recommendations in advisory #616599. There are two tools provided to assist with generating SPDs and Makefiles to integrate into the coreboot build. These tools can also be used to allocate DRAM @@ -292,6 +295,100 @@ string like "9 10 11 12 14". } ``` +### LP5 attributes + +#### Mandatory + +* `densityPerDieGb`: Density per die in Gb. Valid values: `4, 6, 8, 12, 16, + 24, 32` Gb per die. + +* `diesPerPackage`: Number of physical dies in each SDRAM package. Valid + values: `2, 4, 8` dies per package. + +* `bitWidthPerChannel`: Width of each physical channel. Valid values: `8, 16` + bits. + +* `ranksPerChannel`: Number of ranks per physical channel. Valid values: `1, + 2`. If the channels across multiple dies share the same DQ/DQS pins but use + a separate CS, then ranks is 2 else it is 1. + +* `speedMbps`: Maximum data rate supported by the part in Mbps. Valid values: + `5500, 6400` Mbps. + +#### Optional + +* `trfcabNs`: Minimum Refresh Recovery Delay Time (tRFCab) for all banks in + nanoseconds. As per JESD209-5B, this is dependent on the density per die. + Default values used: + + * 4 Gb : 180 ns + * 6 Gb : 210 ns + * 8 Gb : 210 ns + * 12 Gb: 280 ns + * 16 Gb: 280 ns + * 24 Gb: 380 ns + * 32 Gb: 380 ns + +* `trfcpbNs`: Minimum Refresh Recovery Delay Time (tRFCpb) per bank in + nanoseconds. As per JESD209-5B, this is dependent on the density per die. + Default values used: + + * 4 Gb : 90 ns + * 6 Gb : 120 ns + * 8 Gb : 120 ns + * 12 Gb: 140 ns + * 16 Gb: 140 ns + * 24 Gb: 190 ns + * 32 Gb: 190 ns + +* `trpabMinNs`: Minimum Row Precharge Delay Time (tRPab) for all banks in + nanoseconds. As per JESD209-5B, this is max(21ns, 2nCK), which defaults to + `21 ns`. + +* `trppbMinNs`: Minimum Row Precharge Delay Time (tRPpb) per bank in + nanoseconds. As per JESD209-5B, this is max(18ns, 2nCK) which defaults to + `18 ns`. + +* `tckMinPs`: SDRAM minimum cycle time (tCKmin) value in picoseconds. LPDDR5 + has two clocks: the command/addrees clock (CK) and the data clock (WCK). + They are related by the WCK:CK ratio, which can be either 4:1 or 2:1. For + LPDDR5, tCKmin is the CK period, which can be calculated from the + `speedMbps` attribute and the WCK:CK ratio as follows: `tCKmin = 1 / + (speedMbps / 2 / WCK:CK)`. The default values used are for a 4:1 WCK:CK + ratio: + + * 6400 Mbps: 1250 ps + * 5500 Mbps: 1455 ps + +* `taaMinPs`: Minimum CAS Latency Time(tAAmin) in picoseconds. This value + defaults to nck * tCKmin, where nck is maximum CAS latency, and is + determined from the `speedMbps` attribute as per JESD209-5B: + + * 6400 Mbps: 17 + * 5500 Mbps: 15 + +* `trcdMinNs`: Minimum RAS# to CAS# Delay Time (tRCDmin) in nanoseconds. As + per JESD209-5B, this is max(18ns, 2nCK) which defaults to `18 ns`. + +#### Example `memory_parts.json` + +``` +{ + "parts": [ + { + "name": "MT62F1G32D4DR-031 WT:B", + "attribs": { + "densityPerDieGb": 8, + "diesPerPackage": 4, + "bitWidthPerChannel": 16, + "ranksPerChannel": 2, + "speedMbps": 6400 + } + }, + ] +} +``` + ### Output The `spd_gen` tool generates the directory structure shown below. The inputs to diff --git a/util/spd_tools/src/part_id_gen/part_id_gen.go b/util/spd_tools/src/part_id_gen/part_id_gen.go index c67f1273ee..750b825e4e 100644 --- a/util/spd_tools/src/part_id_gen/part_id_gen.go +++ b/util/spd_tools/src/part_id_gen/part_id_gen.go @@ -45,6 +45,7 @@ var supportedPlatforms = [...]string{ var supportedMemTechs = [...]string{ "lp4x", "ddr4", + "lp5", } func usage() { diff --git a/util/spd_tools/src/spd_gen/lp5.go b/util/spd_tools/src/spd_gen/lp5.go new file mode 100644 index 0000000000..2e52bd595c --- /dev/null +++ b/util/spd_tools/src/spd_gen/lp5.go @@ -0,0 +1,617 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +package main + +import ( + "encoding/json" + "fmt" +) + +/* ------------------------------------------------------------------------------------------ */ +/* LP5-defined types */ +/* ------------------------------------------------------------------------------------------ */ + +type lp5 struct { +} + +type LP5MemAttributes struct { + /* Primary attributes - must be provided by JSON file for each part */ + DensityPerDieGb int + DiesPerPackage int + BitWidthPerChannel int + RanksPerChannel int + SpeedMbps int + + /* + * All the following parameters are optional and required only if the part requires + * special parameters as per the datasheet. + */ + /* Timing parameters */ + TRFCABNs int + TRFCPBNs int + TRPABMinNs int + TRPPBMinNs int + TCKMinPs int + TAAMinPs int + TRCDMinNs int +} + +type LP5DensityParams struct { + DensityEncoding byte + RowAddressBitsx8Channel int + RowAddressBitsx16Channel int + TRFCABNs int + TRFCPBNs int +} + +type LP5SpeedParams struct { + TCKMinPs int + MaxCASLatency int +} + +type LP5SPDAttribFunc func(*LP5MemAttributes) byte + +type LP5SPDAttribTableEntry struct { + constVal byte + getVal LP5SPDAttribFunc +} + +/* ------------------------------------------------------------------------------------------ */ +/* Constants */ +/* ------------------------------------------------------------------------------------------ */ + +const ( + /* SPD Byte Index */ + LP5SPDIndexSize = 0 + LP5SPDIndexRevision = 1 + LP5SPDIndexMemoryType = 2 + LP5SPDIndexModuleType = 3 + LP5SPDIndexDensityBanks = 4 + LP5SPDIndexAddressing = 5 + LP5SPDIndexPackageType = 6 + LP5SPDIndexOptionalFeatures = 7 + LP5SPDIndexModuleOrganization = 12 + LP5SPDIndexBusWidth = 13 + LP5SPDIndexTimebases = 17 + LP5SPDIndexTCKMin = 18 + LP5SPDIndexTAAMin = 24 + LP5SPDIndexTRCDMin = 26 + LP5SPDIndexTRPABMin = 27 + LP5SPDIndexTRPPBMin = 28 + LP5SPDIndexTRFCABMinLSB = 29 + LP5SPDIndexTRFCABMinMSB = 30 + LP5SPDIndexTRFCPBMinLSB = 31 + LP5SPDIndexTRFCPBMinMSB = 32 + LP5SPDIndexTRPPBMinFineOffset = 120 + LP5SPDIndexTRPABMinFineOffset = 121 + LP5SPDIndexTRCDMinFineOffset = 122 + LP5SPDIndexTAAMinFineOffset = 123 + LP5SPDIndexTCKMinFineOffset = 125 + LP5SPDIndexManufacturerPartNumberStartByte = 329 + LP5SPDIndexManufacturerPartNumberEndByte = 348 + + /* SPD Byte Value */ + + /* + * From JEDEC spec: + * 6:4 (Bytes total) = 2 (512 bytes) + * 3:0 (Bytes used) = 3 (384 bytes) + * Set to 0x23 for LPDDR5. + */ + LP5SPDValueSize = 0x23 + + /* + * Revision 1.0. + */ + LP5SPDValueRevision = 0x10 + + /* + * As per advisory #616599, ADL MRC expects LPDDR5 memory type = 0x13. + */ + LP5SPDValueMemoryType = 0x13 + + /* + * From JEDEC spec: + * 7:7 (Hybrid) = 0 (Not hybrid) + * 6:4 (Hybrid media) = 000 (Not hybrid) + * 3:0 (Base Module Type) = 1110 (Non-DIMM solution) + * + * This is dependent on hardware design. LPDDR5 only has memory down solution. + * Hence this is not hybrid non-DIMM solution. + * Set to 0x0E. + */ + LP5SPDValueModuleType = 0x0e + + /* + * From JEDEC spec: + * 5:4 (Maximum Activate Window) = 00 (8192 * tREFI) + * 3:0 (Maximum Activate Count) = 1000 (Unlimited MAC) + * Set to 0x08. + */ + LP5SPDValueOptionalFeatures = 0x08 + + /* + * For ADL (as per advisory #616599): + * 7:5 (Number of system channels) = 000 (1 channel always) + * 4:3 (Bus width extension) = 00 (no ECC) + * 2:0 (Bus width) = 001 (x16 always) + * Set to 0x01. + */ + LP5SPDValueBusWidth = 0x01 + + /* + * From JEDEC spec: + * 3:2 (MTB) = 00 (0.125ns) + * 1:0 (FTB) = 00 (1ps) + * Set to 0x00. + */ + LP5SPDValueTimebases = 0x00 + + /* As per JEDEC spec, unused digits of manufacturer part number are left as blank. */ + LP5SPDValueManufacturerPartNumberBlank = 0x20 +) + +const ( + /* + * LPDDR5 has a flexible bank architecture with three programmable bank modes: BG, 8B, 16B. + * ADL will use 8B mode for all parts. + * + * From JEDEC spec: + * 7:6 (Bank Group Bits) = 00 (no bank groups) + * 5:4 (Bank Address Bits) = 01 (8 banks) + * Set bits 7:4 to 0b0001. + */ + LP5BankGroupsBanks = 0x1 + + /* + * Tables 8 and 9 from JESD209-5B. + * ADL uses 8B mode for all parts. The column addresses are the same for x8 and x16. + * Effective column address bits = column address bits + burst address bits = 6 + 5 = 11. + * As per JESD 21-C, this is encoded as 0b010. + */ + LP5ColumnAddressBits = 0x2 +) + +/* ------------------------------------------------------------------------------------------ */ +/* Global variables */ +/* ------------------------------------------------------------------------------------------ */ + +var LP5PlatformSetMap = map[int][]int{ + 0: {PlatformADL}, +} + +var LP5PartAttributeMap = map[string]LP5MemAttributes{} +var LP5CurrSet int + +/* + * DensityEncoding: Maps the die density in Gb to the SPD encoding of the die density + * as per JESD 21-C. + * + * RowAddressBits: Maps the die density to the number of row address bits. + * Tables 6-11 in JESD209-5B (same for all three bank modes). + * + * TRFCABNs/TRFCPBNs: Maps the die density to the refresh timings. + * Tables 235 and 236 in JESD209-5B (same for all three bank modes). + */ +var LP5DensityGbToSPDEncoding = map[int]LP5DensityParams{ + 4: { + DensityEncoding: 0x4, + RowAddressBitsx8Channel: 15, + RowAddressBitsx16Channel: 14, + TRFCABNs: 180, + TRFCPBNs: 90, + }, + 6: { + DensityEncoding: 0xb, + RowAddressBitsx8Channel: 16, + RowAddressBitsx16Channel: 15, + TRFCABNs: 210, + TRFCPBNs: 120, + }, + 8: { + DensityEncoding: 0x5, + RowAddressBitsx8Channel: 16, + RowAddressBitsx16Channel: 15, + TRFCABNs: 210, + TRFCPBNs: 120, + }, + 12: { + DensityEncoding: 0x8, + RowAddressBitsx8Channel: 17, + RowAddressBitsx16Channel: 16, + TRFCABNs: 280, + TRFCPBNs: 140, + }, + 16: { + DensityEncoding: 0x6, + RowAddressBitsx8Channel: 17, + RowAddressBitsx16Channel: 16, + TRFCABNs: 280, + TRFCPBNs: 140, + }, + 24: { + DensityEncoding: 0x9, + RowAddressBitsx8Channel: 18, + RowAddressBitsx16Channel: 17, + TRFCABNs: 380, + TRFCPBNs: 190, + }, + 32: { + DensityEncoding: 0x7, + RowAddressBitsx8Channel: 18, + RowAddressBitsx16Channel: 17, + TRFCABNs: 380, + TRFCPBNs: 190, + }, +} + +/* + * Maps the number of row address bits to the SPD encoding as per JESD 21-C. + */ +var LP5RowAddressBitsEncoding = map[int]byte{ + 14: 0x2, + 15: 0x3, + 16: 0x4, + 17: 0x5, + 18: 0x6, +} + +/* + * TCKMinPs: + * LPDDR5 has two clocks: the command/address clock (CK) and the data clock (WCK). They are + * related by the WCK:CK ratio, which can be either 4:1 or 2:1. On ADL, 4:1 is used. + * For ADL, the MRC expects the tCKmin to encode the CK period. This is calculated as: + * tCKmin = 1 / CK rate + * = 1 / (WCK rate / WCK:CK) + * = 1 / (speed grade / 2 / WCK:CK) // "double data rate" + * + * MaxCASLatency: + * From Table 220 of JESD209-5B, using a 4:1 WCK:CK ratio and Set 0. + */ +var LP5SpeedMbpsToSPDEncoding = map[int]LP5SpeedParams{ + 6400: { + TCKMinPs: 1250, /* 1 / (6400 / 2 / 4) */ + MaxCASLatency: 17, + }, + 5500: { + TCKMinPs: 1455, /* 1 / (5500 / 2 / 4) */ + MaxCASLatency: 15, + }, +} + +var LP5SPDAttribTable = map[int]LP5SPDAttribTableEntry{ + LP5SPDIndexSize: {constVal: LP5SPDValueSize}, + LP5SPDIndexRevision: {constVal: LP5SPDValueRevision}, + LP5SPDIndexMemoryType: {constVal: LP5SPDValueMemoryType}, + LP5SPDIndexModuleType: {constVal: LP5SPDValueModuleType}, + LP5SPDIndexDensityBanks: {getVal: LP5EncodeDensityBanks}, + LP5SPDIndexAddressing: {getVal: LP5EncodeSdramAddressing}, + LP5SPDIndexPackageType: {getVal: LP5EncodePackageType}, + LP5SPDIndexOptionalFeatures: {constVal: LP5SPDValueOptionalFeatures}, + LP5SPDIndexModuleOrganization: {getVal: LP5EncodeModuleOrganization}, + LP5SPDIndexBusWidth: {constVal: LP5SPDValueBusWidth}, + LP5SPDIndexTimebases: {constVal: LP5SPDValueTimebases}, + LP5SPDIndexTCKMin: {getVal: LP5EncodeTCKMin}, + LP5SPDIndexTCKMinFineOffset: {getVal: LP5EncodeTCKMinFineOffset}, + LP5SPDIndexTAAMin: {getVal: LP5EncodeTAAMin}, + LP5SPDIndexTAAMinFineOffset: {getVal: LP5EncodeTAAMinFineOffset}, + LP5SPDIndexTRCDMin: {getVal: LP5EncodeTRCDMin}, + LP5SPDIndexTRCDMinFineOffset: {getVal: LP5EncodeTRCDMinFineOffset}, + LP5SPDIndexTRPABMin: {getVal: LP5EncodeTRPABMin}, + LP5SPDIndexTRPABMinFineOffset: {getVal: LP5EncodeTRPABMinFineOffset}, + LP5SPDIndexTRPPBMin: {getVal: LP5EncodeTRPPBMin}, + LP5SPDIndexTRPPBMinFineOffset: {getVal: LP5EncodeTRPPBMinFineOffset}, + LP5SPDIndexTRFCABMinLSB: {getVal: LP5EncodeTRFCABMinLsb}, + LP5SPDIndexTRFCABMinMSB: {getVal: LP5EncodeTRFCABMinMsb}, + LP5SPDIndexTRFCPBMinLSB: {getVal: LP5EncodeTRFCPBMinLsb}, + LP5SPDIndexTRFCPBMinMSB: {getVal: LP5EncodeTRFCPBMinMsb}, +} + +/* ------------------------------------------------------------------------------------------ */ +/* Functions */ +/* ------------------------------------------------------------------------------------------ */ + +func LP5EncodeDensityBanks(memAttribs *LP5MemAttributes) byte { + var b byte + + // 3:0 Density per die. + b = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].DensityEncoding + + // 5:4 Bank address bits. + // 7:6 Bank group bits. + b |= LP5BankGroupsBanks << 4 + + return b +} + +func LP5EncodeSdramAddressing(memAttribs *LP5MemAttributes) byte { + var b byte + + // 2:0 Column address bits. + b = LP5ColumnAddressBits + + // 5:3 Row address bits. + density := memAttribs.DensityPerDieGb + var rowAddressBits int + if memAttribs.BitWidthPerChannel == 8 { + rowAddressBits = LP5DensityGbToSPDEncoding[density].RowAddressBitsx8Channel + } else { + rowAddressBits = LP5DensityGbToSPDEncoding[density].RowAddressBitsx16Channel + } + b |= LP5RowAddressBitsEncoding[rowAddressBits] << 3 + + return b +} + +func LP5EncodePackageType(memAttribs *LP5MemAttributes) byte { + var b byte + + // 1:0 Signal loading index. + b = 1 + + // 3:2 Channels per package. + // Channels per package = package width (e.g. x32) / bitWidthPerChannel (x8 or x16). + // This can equivalently be calculated as diesPerPackage / ranksPerChannel. + // This calculation is used to avoid adding a redundant attribute for package width. + channels := memAttribs.DiesPerPackage / memAttribs.RanksPerChannel + b |= byte(channels>>1) << 2 + + // 6:4 Dies per package. + b |= (byte(memAttribs.DiesPerPackage) - 1) << 4 + + // 7:7 Package type. + var packageType byte + if memAttribs.DiesPerPackage > 1 { + packageType = 1 // Non-Monolithic + } else { + packageType = 0 // Monolithic + } + b |= packageType << 7 + + return b +} + +func LP5EncodeModuleOrganization(memAttribs *LP5MemAttributes) byte { + var b byte + + // 2:0 Device data width per channel + b = byte(memAttribs.BitWidthPerChannel / 8) + + // 5:3 Package ranks per channel + b |= byte(memAttribs.RanksPerChannel-1) << 3 + + return b +} + +func LP5EncodeTCKMin(memAttribs *LP5MemAttributes) byte { + return convPsToMtbByte(memAttribs.TCKMinPs) +} + +func LP5EncodeTCKMinFineOffset(memAttribs *LP5MemAttributes) byte { + return convPsToFtbByte(memAttribs.TCKMinPs) +} + +func LP5EncodeTAAMin(memAttribs *LP5MemAttributes) byte { + return convPsToMtbByte(memAttribs.TAAMinPs) +} + +func LP5EncodeTAAMinFineOffset(memAttribs *LP5MemAttributes) byte { + return convPsToFtbByte(memAttribs.TAAMinPs) +} + +func LP5EncodeTRCDMin(memAttribs *LP5MemAttributes) byte { + return convNsToMtbByte(memAttribs.TRCDMinNs) +} + +func LP5EncodeTRCDMinFineOffset(memAttribs *LP5MemAttributes) byte { + return convNsToFtbByte(memAttribs.TRCDMinNs) +} + +func LP5EncodeTRPABMin(memAttribs *LP5MemAttributes) byte { + return convNsToMtbByte(memAttribs.TRPABMinNs) +} + +func LP5EncodeTRPABMinFineOffset(memAttribs *LP5MemAttributes) byte { + return convNsToFtbByte(memAttribs.TRPABMinNs) +} + +func LP5EncodeTRPPBMin(memAttribs *LP5MemAttributes) byte { + return convNsToMtbByte(memAttribs.TRPPBMinNs) +} + +func LP5EncodeTRPPBMinFineOffset(memAttribs *LP5MemAttributes) byte { + return convNsToFtbByte(memAttribs.TRPPBMinNs) +} + +func LP5EncodeTRFCABMinMsb(memAttribs *LP5MemAttributes) byte { + return byte((convNsToMtb(memAttribs.TRFCABNs) >> 8) & 0xff) +} + +func LP5EncodeTRFCABMinLsb(memAttribs *LP5MemAttributes) byte { + return byte(convNsToMtb(memAttribs.TRFCABNs) & 0xff) +} + +func LP5EncodeTRFCPBMinMsb(memAttribs *LP5MemAttributes) byte { + return byte((convNsToMtb(memAttribs.TRFCPBNs) >> 8) & 0xff) +} + +func LP5EncodeTRFCPBMinLsb(memAttribs *LP5MemAttributes) byte { + return byte(convNsToMtb(memAttribs.TRFCPBNs) & 0xff) +} + +func LP5UpdateTCKMin(memAttribs *LP5MemAttributes) { + if memAttribs.TCKMinPs == 0 { + memAttribs.TCKMinPs = LP5SpeedMbpsToSPDEncoding[memAttribs.SpeedMbps].TCKMinPs + } +} + +func LP5UpdateTAAMin(memAttribs *LP5MemAttributes) { + if memAttribs.TAAMinPs == 0 { + maxCAS := LP5SpeedMbpsToSPDEncoding[memAttribs.SpeedMbps].MaxCASLatency + memAttribs.TAAMinPs = memAttribs.TCKMinPs * maxCAS + } +} + +func LP5UpdateTRFCAB(memAttribs *LP5MemAttributes) { + if memAttribs.TRFCABNs == 0 { + memAttribs.TRFCABNs = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].TRFCABNs + } +} + +func LP5UpdateTRFCPB(memAttribs *LP5MemAttributes) { + if memAttribs.TRFCPBNs == 0 { + memAttribs.TRFCPBNs = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].TRFCPBNs + } +} + +func LP5UpdateTRCD(memAttribs *LP5MemAttributes) { + if memAttribs.TRCDMinNs == 0 { + /* Table 372 from JESD209-5B */ + memAttribs.TRCDMinNs = 18 + } +} + +func LP5UpdateTRPAB(memAttribs *LP5MemAttributes) { + if memAttribs.TRPABMinNs == 0 { + /* Table 372 from JESD209-5B */ + memAttribs.TRPABMinNs = 21 + } +} + +func LP5UpdateTRPPB(memAttribs *LP5MemAttributes) { + if memAttribs.TRPPBMinNs == 0 { + /* Table 372 from JESD209-5B */ + memAttribs.TRPPBMinNs = 18 + } +} + +func lp5UpdateMemoryAttributes(memAttribs *LP5MemAttributes) { + LP5UpdateTCKMin(memAttribs) + LP5UpdateTAAMin(memAttribs) + LP5UpdateTRFCAB(memAttribs) + LP5UpdateTRFCPB(memAttribs) + LP5UpdateTRCD(memAttribs) + LP5UpdateTRPAB(memAttribs) + LP5UpdateTRPPB(memAttribs) +} + +func LP5ValidateDensity(density int) error { + if _, ok := LP5DensityGbToSPDEncoding[density]; !ok { + return fmt.Errorf("Incorrect density per die: %d Gb", density) + } + return nil +} + +func LP5ValidateDies(dies int) error { + if dies != 2 && dies != 4 && dies != 8 { + return fmt.Errorf("Incorrect dies: %d", dies) + } + return nil +} + +func LP5ValidateDataWidth(width int) error { + if width != 8 && width != 16 { + return fmt.Errorf("Incorrect bit width: %d", width) + } + return nil +} + +func LP5ValidateRanks(ranks int) error { + if ranks != 1 && ranks != 2 { + return fmt.Errorf("Incorrect ranks: %d", ranks) + } + return nil +} + +func LP5ValidateSpeed(speed int) error { + if _, ok := LP5SpeedMbpsToSPDEncoding[speed]; !ok { + return fmt.Errorf("Incorrect speed: %d Mbps", speed) + } + return nil +} + +func lp5ValidateMemPartAttributes(memAttribs *LP5MemAttributes) error { + if err := LP5ValidateDensity(memAttribs.DensityPerDieGb); err != nil { + return err + } + if err := LP5ValidateDies(memAttribs.DiesPerPackage); err != nil { + return err + } + if err := LP5ValidateDataWidth(memAttribs.BitWidthPerChannel); err != nil { + return err + } + if err := LP5ValidateRanks(memAttribs.RanksPerChannel); err != nil { + return err + } + if err := LP5ValidateSpeed(memAttribs.SpeedMbps); err != nil { + return err + } + + return nil +} + +func LP5IsManufacturerPartNumberByte(index int) bool { + if index >= LP5SPDIndexManufacturerPartNumberStartByte && + index <= LP5SPDIndexManufacturerPartNumberEndByte { + return true + } + return false +} + +/* ------------------------------------------------------------------------------------------ */ +/* Interface Functions */ +/* ------------------------------------------------------------------------------------------ */ + +func (lp5) getSetMap() map[int][]int { + return LP5PlatformSetMap +} + +func (lp5) addNewPart(name string, attribs interface{}) error { + var lp5Attributes LP5MemAttributes + eByte, err := json.Marshal(attribs) + if err != nil { + return err + } + + if err := json.Unmarshal(eByte, &lp5Attributes); err != nil { + return err + } + + if err := lp5ValidateMemPartAttributes(&lp5Attributes); err != nil { + return err + } + + LP5PartAttributeMap[name] = lp5Attributes + return nil +} + +func (lp5) getSPDAttribs(name string, set int) (interface{}, error) { + lp5Attributes := LP5PartAttributeMap[name] + + LP5CurrSet = set + + lp5UpdateMemoryAttributes(&lp5Attributes) + + return lp5Attributes, nil +} + +func (lp5) getSPDLen() int { + return 512 +} + +func (lp5) getSPDByte(index int, attribs interface{}) byte { + e, ok := LP5SPDAttribTable[index] + if !ok { + if LP5IsManufacturerPartNumberByte(index) { + return LP5SPDValueManufacturerPartNumberBlank + } + return 0x00 + } + + if e.getVal != nil { + var lp5Attribs LP5MemAttributes + lp5Attribs = attribs.(LP5MemAttributes) + return e.getVal(&lp5Attribs) + } + + return e.constVal +} diff --git a/util/spd_tools/src/spd_gen/spd_gen.go b/util/spd_tools/src/spd_gen/spd_gen.go index 57b428b2b3..fa6549262d 100644 --- a/util/spd_tools/src/spd_gen/spd_gen.go +++ b/util/spd_tools/src/spd_gen/spd_gen.go @@ -65,6 +65,12 @@ var platformNames = map[int]string{ PlatformCZN: "CZN", } +var memTechMap = map[string]memTech{ + "lp4x": lp4x{}, + "ddr4": ddr4{}, + "lp5": lp5{}, +} + /* ------------------------------------------------------------------------------------------ */ /* Conversion Helper Functions */ /* ------------------------------------------------------------------------------------------ */ @@ -211,7 +217,9 @@ func usage() { fmt.Printf("\nUsage: %s \n\n", os.Args[0]) fmt.Printf(" where,\n") fmt.Printf(" mem_parts_list_json = JSON File containing list of memory parts and attributes\n") - fmt.Printf(" mem_technology = Memory technology -- one of lp4x, ddr4\n\n\n") + fmt.Printf(" mem_technology = Memory technology for which to generate SPDs\n") + fmt.Printf(" supported technologies: %v\n\n\n", + reflect.ValueOf(memTechMap).MapKeys()) } func main() { @@ -223,11 +231,8 @@ func main() { var t memTech memPartsFilePath, memTechnology := os.Args[1], os.Args[2] - if strings.ToUpper(memTechnology) == "LP4X" { - t = lp4x{} - } else if strings.ToUpper(memTechnology) == "DDR4" { - t = ddr4{} - } else { + t, ok := memTechMap[strings.ToLower(memTechnology)] + if !ok { log.Fatal("Unsupported memory technology ", memTechnology) } -- cgit v1.2.3