From 0867062412dd4bfe5a556e5f3fd85ba5b682d79b Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 30 Jun 2009 15:17:49 +0000 Subject: This patch unifies the use of config options in v2 to all start with CONFIG_ It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- util/romcc/tests/simple_test4.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'util/romcc/tests/simple_test4.c') diff --git a/util/romcc/tests/simple_test4.c b/util/romcc/tests/simple_test4.c index 57af2af390..4f72dcad67 100644 --- a/util/romcc/tests/simple_test4.c +++ b/util/romcc/tests/simple_test4.c @@ -96,27 +96,27 @@ int log2(int value) /* Base Address */ -#ifndef TTYS0_BASE -#define TTYS0_BASE 0x3f8 +#ifndef CONFIG_TTYS0_BASE +#define CONFIG_TTYS0_BASE 0x3f8 #endif -#ifndef TTYS0_BAUD -#define TTYS0_BAUD 115200 +#ifndef CONFIG_TTYS0_BAUD +#define CONFIG_TTYS0_BAUD 115200 #endif -#if ((115200%TTYS0_BAUD) != 0) +#if ((115200%CONFIG_TTYS0_BAUD) != 0) #error Bad ttys0 baud rate #endif -#define TTYS0_DIV (115200/TTYS0_BAUD) +#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD) /* Line Control Settings */ -#ifndef TTYS0_LCS +#ifndef CONFIG_TTYS0_LCS /* Set 8bit, 1 stop bit, no parity */ -#define TTYS0_LCS 0x3 +#define CONFIG_TTYS0_LCS 0x3 #endif -#define UART_LCS TTYS0_LCS +#define UART_LCS CONFIG_TTYS0_LCS /* Data */ #define UART_RBR 0x00 @@ -138,7 +138,7 @@ int log2(int value) int uart_can_tx_byte(void) { - return inb(TTYS0_BASE + UART_LSR) & 0x20; + return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20; } void uart_wait_to_tx_byte(void) @@ -149,14 +149,14 @@ void uart_wait_to_tx_byte(void) void uart_wait_until_sent(void) { - while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) + while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40)) ; } void uart_tx_byte(unsigned char data) { uart_wait_to_tx_byte(); - outb(data, TTYS0_BASE + UART_TBR); + outb(data, CONFIG_TTYS0_BASE + UART_TBR); /* Make certain the data clears the fifos */ uart_wait_until_sent(); } @@ -164,14 +164,14 @@ void uart_tx_byte(unsigned char data) void uart_init(void) { /* disable interrupts */ - outb(0x0, TTYS0_BASE + UART_IER); + outb(0x0, CONFIG_TTYS0_BASE + UART_IER); /* enable fifo's */ - outb(0x01, TTYS0_BASE + UART_FCR); + outb(0x01, CONFIG_TTYS0_BASE + UART_FCR); /* Set Baud Rate Divisor to 12 ==> 115200 Baud */ - outb(0x80 | UART_LCS, TTYS0_BASE + UART_LCR); - outb(TTYS0_DIV & 0xFF, TTYS0_BASE + UART_DLL); - outb((TTYS0_DIV >> 8) & 0xFF, TTYS0_BASE + UART_DLM); - outb(UART_LCS, TTYS0_BASE + UART_LCR); + outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); + outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL); + outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM); + outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); } void __console_tx_char(unsigned char byte) -- cgit v1.2.3