From c88733c0213728b483d5832585823632636f0ebb Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Thu, 27 Nov 2008 22:48:48 +0000 Subject: The existing check in probe_spi_res() was right for SPI controllers which support all commands, but may not exist. For controllers which support only a subset of commands, it will fail in unexpected ways. Even if a command is supported by the controller, it may be unavailable if the controller is locked down. The new logic checks if RDID could be issued and its return values made sense (not 0xff 0xff 0xff). In that case, RES probing is not performed. Otherwise, we try RES. There is one drawback: If RDID returned unexpected values, we don't issue a RES probe. However, in that case we should try to match RDID anyway. Signed-off-by: Carl-Daniel Hailfinger Acked-by: FENG yu ning git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3774 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- util/flashrom/spi.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'util/flashrom') diff --git a/util/flashrom/spi.c b/util/flashrom/spi.c index f6768571da..a5b85f4e02 100644 --- a/util/flashrom/spi.c +++ b/util/flashrom/spi.c @@ -160,13 +160,11 @@ int probe_spi_res(struct flashchip *flash) unsigned char readarr[3]; uint32_t model_id; - if (spi_rdid(readarr, 3)) - /* We couldn't issue RDID, it's pointless to try RES. */ - return 0; - - /* Check if RDID returns 0xff 0xff 0xff, then we use RES. */ - if ((readarr[0] != 0xff) || (readarr[1] != 0xff) || - (readarr[2] != 0xff)) + /* Check if RDID was successful and did not return 0xff 0xff 0xff. + * In that case, RES is pointless. + */ + if (!spi_rdid(readarr, 3) && ((readarr[0] != 0xff) || + (readarr[1] != 0xff) || (readarr[2] != 0xff))) return 0; if (spi_res(readarr)) -- cgit v1.2.3