From 1918c81d65ecfdcb64fa811debd919b2a25cf47d Mon Sep 17 00:00:00 2001 From: Idwer Vollering Date: Fri, 1 Sep 2017 17:24:18 +0200 Subject: util/board_status: do a spell check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Ie39be471851586076343b8e9454a9140d4664b8d Signed-off-by: Idwer Vollering Reviewed-on: https://review.coreboot.org/21322 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer Reviewed-by: Sumeet R Pawnikar --- util/board_status/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'util/board_status') diff --git a/util/board_status/README b/util/board_status/README index 23378262dd..c462e7de2c 100644 --- a/util/board_status/README +++ b/util/board_status/README @@ -9,13 +9,13 @@ Else you will need to have to set the default log level at compile time, to do that go in "Console --->" in make menuconfig, then set "Default console log level" to SPEW -Rereference: ------------- +Reference: +---------- [1] in make menuconfig you should have: [*] Use CMOS for configuration values This option is also known as CONFIG_USE_OPTION_TABLE in Kconfig. -Information trough SSH +Information through SSH ====================== -board_status.sh can gather information trough ssh with the -r +board_status.sh can gather information through ssh with the -r option. When using "-r ", The script will attempt to log into @@ -28,10 +28,10 @@ That can be achieved with the use of SSH keys and ssh-agent. board_status.sh expects the remote host to have the following programs in its path: cbmem, dmesg -Boot log gathering trough a serial port +Boot log gathering through a serial port ======================================= When using -s , board_status.sh starts by retrieving the -boot log trough the serial port. +boot log through the serial port. To produce such logs, power off the board, run board_status.sh with the right arguments, power on the board. -- cgit v1.2.3