From 97027fbede3ec42d1c5591f0501ff0b11812f61c Mon Sep 17 00:00:00 2001
From: "Ronald G. Minnich" <rminnich@gmail.com>
Date: Thu, 13 May 2004 20:08:45 +0000
Subject: add comment and new config file

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1558 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
---
 targets/tyan/s2880/Config.lb           |   1 +
 targets/via/epia/Config.ituner.filo.lb | 111 +++++++++++++++++++++++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100644 targets/via/epia/Config.ituner.filo.lb

(limited to 'targets')

diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index df1a518976..33d0a972fc 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -207,6 +207,7 @@ romimage "normal"
 #        option ROM_SIZE = 475136
 #	48K for SCSI FW and 48K for ATI ROM
 #	option ROM_SIZE = 425984  
+#	option ROM_SIZE = (512*1024 - 48*1024)
         option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
diff --git a/targets/via/epia/Config.ituner.filo.lb b/targets/via/epia/Config.ituner.filo.lb
new file mode 100644
index 0000000000..08a017a7f6
--- /dev/null
+++ b/targets/via/epia/Config.ituner.filo.lb
@@ -0,0 +1,111 @@
+# Sample config file for EPIA
+# This will make a target directory of ./epia
+
+loadoptions
+
+target epia-ituner-filo
+
+uses ARCH
+uses CONFIG_COMPRESS
+uses CONFIG_IOAPIC
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_UDELAY_TSC
+uses CPU_FIXUP
+uses FALLBACK_SIZE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
+uses i586
+uses i686
+uses INTEL_PPRO_MTRR
+uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
+uses MEMORY_HOLE
+uses PAYLOAD_SIZE
+uses _RAMBASE
+uses _ROMBASE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_OFFSET
+uses ROM_SECTION_SIZE
+uses ROM_SIZE
+uses STACK_SIZE
+uses USE_FALLBACK_IMAGE
+uses USE_OPTION_TABLE
+uses HAVE_OPTION_TABLE
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses  DEFAULT_CONSOLE_LOGLEVEL
+uses  CONFIG_CONSOLE_SERIAL8250
+uses MAINBOARD
+uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
+uses TTYS0_BAUD
+
+
+option CONFIG_CHIP_CONFIGURE=1
+
+option  MAXIMUM_CONSOLE_LOGLEVEL=8
+option  DEFAULT_CONSOLE_LOGLEVEL=3
+option  CONFIG_CONSOLE_SERIAL8250=1
+
+option CPU_FIXUP=1
+option CONFIG_UDELAY_TSC=0
+option i686=1
+option i586=1
+option INTEL_PPRO_MTRR=1
+option ROM_SIZE=256*1024
+
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
+
+# Ituner m100 needs 19200
+option TTYS0_BAUD=19200
+
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+option FALLBACK_SIZE=131072
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x00004000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+
+#
+# Arima hdama
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Normal"
+	mainboard via/epia
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebi
+	payload ../../../../../../filo.19200.elf
+end
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
+	mainboard via/epia
+#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+#	payload ../../../../tg3--ide_disk.zelf	
+#	payload ../../../../../lnxieepro100.ebi
+	payload ../../../../../../filo.19200.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
-- 
cgit v1.2.3