From 9bdb460a97e87b11167ef22ec2fb737ecb95aa41 Mon Sep 17 00:00:00 2001
From: Eric Biederman <ebiederm@xmission.com>
Date: Mon, 1 Sep 2003 23:17:58 +0000
Subject: - Updates to config.g so that it works more reliably and has initial
 support   for paths - Renamed some configuration variables   SMP ->
 CONFIG_SMP   MAX_CPUS -> CONFIG_MAX_CPUS   MAX_PHYSICAL_CPUS ->
 CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS
 -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP ->
 CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD
 USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS
 START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV

- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
- Updates to config.g so that it works more reliably and has initial support
  for paths
- Renamed some configuration variables
  SMP -> CONFIG_SMP
  MAX_CPUS -> CONFIG_MAX_CPUS
  MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
- Removed some dead configuration variables
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
SMP -> CONFIG_SMP
FINAL_MAINBOARD_FIXUP
SIO_BASE
SIO_SYSTEM_CLK_INPUT
NO_KEYBOARD
USE_NORMAL_IMAGE
SERIAL_CONSOLE
USE_ELF_BOOT
ENABLE_FIXED_AND_VARIABLE_MTRRS
START_CPU_SEG
DISABLE_WATCHDOG
ENABLE_IOMMU
AMD8111_DEV

- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
killed src/sdram/generic_dump_spd.inc
killed src/sdram/generic_dump_spd.inc

- Updated the arima/hdama to build with the new configuration system
- Updated config.g to list all of the variables with make echo


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
---
 targets/tyan/s2882/Config.lb | 37 ++-----------------------------------
 1 file changed, 2 insertions(+), 35 deletions(-)

(limited to 'targets/tyan/s2882')

diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb
index 5842babc5c..3589656794 100644
--- a/targets/tyan/s2882/Config.lb
+++ b/targets/tyan/s2882/Config.lb
@@ -6,7 +6,6 @@ loadoptions
 
 target s2882
 
-uses AMD8111_DEV
 uses ARCH
 uses CONFIG_COMPRESS
 uses CONFIG_IOAPIC
@@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START
 uses CONFIG_SMP
 uses CONFIG_UDELAY_TSC
 uses CPU_FIXUP
-uses ENABLE_FIXED_AND_VARIABLE_MTRRS
 uses FALLBACK_SIZE
-uses FINAL_MAINBOARD_FIXUP
 uses HAVE_FALLBACK_BOOT
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
@@ -31,7 +28,6 @@ uses k8
 uses MAINBOARD
 uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
-uses MAX_CPUS
 #uses MEMORY_HOLE
 uses PAYLOAD_SIZE
 uses _RAMBASE
@@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE
 uses ROM_SECTION_OFFSET
 uses ROM_SECTION_SIZE
 uses ROM_SIZE
-uses SIO_BASE
-uses SIO_SYSTEM_CLK_INPUT
 uses STACK_SIZE
-uses USE_ELF_BOOT
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
 uses USE_OPTION_TABLE
 uses HAVE_OPTION_TABLE
 uses CONFIG_CHIP_CONFIGURE
@@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL
 uses DEBUG
 uses CONFIG_MAX_CPUS
 uses CONFIG_LOGICAL_CPUS
-uses MAX_PHYSICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
 uses LINUXBIOS_EXTRA_VERSION
 uses XIP_ROM_SIZE
 uses XIP_ROM_BASE
@@ -97,10 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
-### Customize our winbond superio chip for this motherboard
-###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
 #
 ###
 ### Build code to export a programmable irq routing table
@@ -114,9 +102,8 @@ option IRQ_SLOT_COUNT=15
 ###
 option CONFIG_SMP=1
 option CONFIG_MAX_CPUS=2
-option MAX_CPUS=2
 option CONFIG_LOGICAL_CPUS=0
-option MAX_PHYSICAL_CPUS=2
+option CONFIG_MAX_PHYSICAL_CPUS=2
 #
 ###
 ### Build code to setup a generic IOAPIC
@@ -135,25 +122,10 @@ option CONFIG_IOAPIC=1
 #option MEMORY_HOLE=0
 #
 ###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
 ### Clean up the motherboard id strings
 ###
 option MAINBOARD_PART_NUMBER="S2882"
 option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
@@ -174,9 +146,6 @@ option ROM_IMAGE_SIZE=65536
 ## We do use compressed image
 option CONFIG_COMPRESS=1
 
-option USE_ELF_BOOT=1
-
-
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
 
@@ -200,8 +169,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9
 
 option DEBUG=1
 
-option AMD8111_DEV=0x5
-
 #
 
 ## LinuxBIOS C code runs at this location in RAM
-- 
cgit v1.2.3