From 6114311c8eaabd14f524e2884316249de9d9578b Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Fri, 19 Jun 2009 15:41:49 +0000 Subject: Convert the MSI MS-6178 board to CBFS. Also, enable HIGH_TABLES support for this board. The HIGH_TABLES failed with: No matching ram area found for range: [0x00000000000f0000, 0x0000000000100000) Ram areas [0x0000000000000000, 0x0000000000001000) Reserved [0x0000000000001000, 0x00000000000a0000) RAM [0x0000000000100000, 0x000000000fff0000) RAM [0x000000000fff0000, 0x0000000010000000) Reserved SELFBOOT RETURNED! Boot failed. The fix was to change northbridge.c as follows: - ram_resource(dev, idx++, 1024, tolmk - 1024); + ram_resource(dev, idx++, 768, tolmk - 768); This is build-tested and tested on hardware by me. It boots fine, for instace with SeaBIOS and the standard GRUB1 from my disk. Signed-off-by: Uwe Hermann Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- targets/msi/ms6178/Config.lb | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'targets/msi/ms6178') diff --git a/targets/msi/ms6178/Config.lb b/targets/msi/ms6178/Config.lb index 6c5f058827..1276c88a77 100644 --- a/targets/msi/ms6178/Config.lb +++ b/targets/msi/ms6178/Config.lb @@ -22,7 +22,6 @@ target ms6178 mainboard msi/ms6178 option ROM_SIZE = 512 * 1024 -# option ROM_SIZE = (512 * 1024) - (32 * 1024) option MAINBOARD_VENDOR = "MSI" option MAINBOARD_PART_NUMBER = "MS-6178" @@ -48,3 +47,6 @@ romimage "fallback" end buildrom ./coreboot.rom ROM_SIZE "normal" "fallback" + +# pci_rom i810.vga vendor_id=0x8086 device_id=0x7120 + -- cgit v1.2.3