From 538b849695feccfd6a1419652de2608f0f5bdf1b Mon Sep 17 00:00:00 2001 From: Nikolay Petukhov Date: Thu, 7 Jun 2007 20:52:42 +0000 Subject: Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards. Both are very similar, thus both use the JUKI-511P target. Linux with patches from Juergen Beisert (http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html) boots and work fine (ide, usb, ethernet, serial, keyboard and sound work normally). Problems: - Filo loads a bzImage only from ide0 (ide1 doesn't work yet). - Video doesn't work, yet. Signed-off-by: Nikolay Petukhov Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2716 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- targets/iei/juki-511p/Config.lb | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 targets/iei/juki-511p/Config.lb (limited to 'targets/iei') diff --git a/targets/iei/juki-511p/Config.lb b/targets/iei/juki-511p/Config.lb new file mode 100644 index 0000000000..751aa2c2f8 --- /dev/null +++ b/targets/iei/juki-511p/Config.lb @@ -0,0 +1,37 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Nikolay Petukhov +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target juki-511p +mainboard iei/juki-511p + +option ROM_SIZE=256*1024 + +option HAVE_PIRQ_TABLE=1 + +option CONFIG_COMPRESS=0 +option CONFIG_PRECOMPRESSED_PAYLOAD=0 + +romimage "image" + option ROM_IMAGE_SIZE=64*1024 + option LINUXBIOS_EXTRA_VERSION="-filo" + payload ../../filo.elf +end + +buildrom ./linuxbios.rom ROM_SIZE "image" -- cgit v1.2.3