From fb43107e62ffba04f2d9aafad05c794d904471aa Mon Sep 17 00:00:00 2001 From: Frank Chu Date: Fri, 11 Nov 2022 15:20:25 +0800 Subject: mb/google/brya/var/marasov: Add touchscreen and touchpad for marasov Declare touchscreen and touchpad under I2C3 and I2C5 BUG=b:254365935 BRANCH=firmware-brya-14505.B TEST=Built successfully Signed-off-by: Frank Chu Change-Id: Ifc865fc0c0c42af0d74272289c562e347fac3a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/69467 Reviewed-by: Nick Vaccaro Reviewed-by: Frank Chu Tested-by: build bot (Jenkins) --- .../google/brya/variants/marasov/overridetree.cb | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'src') diff --git a/src/mainboard/google/brya/variants/marasov/overridetree.cb b/src/mainboard/google/brya/variants/marasov/overridetree.cb index b09d2f30ce..cb7733580d 100644 --- a/src/mainboard/google/brya/variants/marasov/overridetree.cb +++ b/src/mainboard/google/brya/variants/marasov/overridetree.cb @@ -117,6 +117,38 @@ chip soc/intel/alderlake device i2c 50 on end end end #I2C1 + device ref i2c3 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN9008"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "300" + register "generic.reset_off_delay_ms" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "6" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end #I2C3 + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""PIXA2342"" + register "desc" = ""PIXART Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "wake" = "GPE0_DW2_14" + register "detect" = "1" + device i2c 15 on end + end + end #I2C5 device ref pcie_rp11 on # Enable NVMe SSD PCIe 11-12 using clk 1 register "pch_pcie_rp[PCH_RP(11)]" = "{ -- cgit v1.2.3