From f0e721050a6b9e6b4b25b11f18f6b256c2da453a Mon Sep 17 00:00:00 2001 From: Varshit B Pandya Date: Wed, 10 Nov 2021 19:16:45 +0530 Subject: mb/google/brya/var/redrix: Configure _DSC for CAM devices to ACPI_DEVICE_SLEEP_D3_COLD Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:199823938 TEST=Build and boot redrix to OS. Verify entries in SSDT and monitor LED during boot. Signed-off-by: Varshit B Pandya Change-Id: I88ea1b87698c63e1bd69367ee857fba3f25c84ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/59260 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- src/mainboard/google/brya/variants/redrix/overridetree.cb | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/brya/variants/redrix/overridetree.cb b/src/mainboard/google/brya/variants/redrix/overridetree.cb index dc1a424260..e4119f6503 100644 --- a/src/mainboard/google/brya/variants/redrix/overridetree.cb +++ b/src/mainboard/google/brya/variants/redrix/overridetree.cb @@ -276,6 +276,7 @@ chip soc/intel/alderlake register "num_freq_entries" = "1" register "link_freq[0]" = "DEFAULT_LINK_FREQ" register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "has_power_resource" = "1" #Controls @@ -311,6 +312,7 @@ chip soc/intel/alderlake register "acpi_name" = ""CAM0"" register "chip_name" = ""Hi-556 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" register "ssdb.lanes_used" = "2" register "ssdb.link_used" = "1" @@ -351,8 +353,19 @@ chip soc/intel/alderlake register "acpi_name" = ""NVM0"" register "chip_name" = ""M24C64X"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC"" + register "has_power_resource" = "1" + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_UCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" register "nvm_size" = "0x2000" register "nvm_pagesize" = "1" -- cgit v1.2.3