From eed64473fdc6056ad96557f7e16e22855816746e Mon Sep 17 00:00:00 2001 From: Lijian Zhao Date: Tue, 26 Feb 2019 23:57:10 -0800 Subject: mb/google/arcada: Update USB2 port6 AFE setting Accoriding to 574354, we need to tune each port to pass eye diagram other than just use recommanded setting as they are base guidence only. Bug=b:124407280 TEST=Build and boot up on arcada board. Signed-off-by: Lijian Zhao Change-Id: I587695809b368edd33852c4241de097ca31e9d66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31632 Reviewed-by: Pratikkumar V Prajapati Reviewed-by: Duncan Laurie Tested-by: build bot (Jenkins) --- src/mainboard/google/sarien/variants/arcada/devicetree.cb | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/sarien/variants/arcada/devicetree.cb b/src/mainboard/google/sarien/variants/arcada/devicetree.cb index c966e9ac68..c0411e1564 100644 --- a/src/mainboard/google/sarien/variants/arcada/devicetree.cb +++ b/src/mainboard/google/sarien/variants/arcada/devicetree.cb @@ -125,7 +125,14 @@ chip soc/intel/cannonlake register "usb2_ports[3]" = "USB2_PORT_EMPTY" register "usb2_ports[4]" = "USB2_PORT_EMPTY" register "usb2_ports[5]" = "USB2_PORT_LONG(OC_SKIP)" # Camera - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # WWAN + register "usb2_ports[6]" = "{ + .enable = 1, \ + .ocpin = OC_SKIP, \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_28P15MV, \ + .pre_emp_bit = USB2_HALF_BIT_PRE_EMP, \ + }" # WWAN register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # USH register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth -- cgit v1.2.3