From e70142c9c2e2b7b4fbf8883790df72b6d5536c19 Mon Sep 17 00:00:00 2001 From: Barnali Sarkar Date: Tue, 28 Mar 2017 16:32:33 +0530 Subject: soc/intel/apollolake: Clean up code by using common FAST_SPI module This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: Ifd72734dadda541fe4c828e4f1716e532ec69c27 Signed-off-by: Barnali Sarkar Reviewed-on: https://review.coreboot.org/19080 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin Reviewed-by: Subrata Banik Reviewed-by: Furquan Shaikh --- src/soc/intel/apollolake/Kconfig | 1 + src/soc/intel/apollolake/Makefile.inc | 6 - src/soc/intel/apollolake/bootblock/bootblock.c | 35 +- src/soc/intel/apollolake/chip.c | 4 +- src/soc/intel/apollolake/flash_ctrlr.c | 391 --------------------- src/soc/intel/apollolake/include/soc/flash_ctrlr.h | 94 ----- src/soc/intel/apollolake/mmap_boot.c | 17 +- src/soc/intel/apollolake/romstage.c | 1 - 8 files changed, 9 insertions(+), 540 deletions(-) delete mode 100644 src/soc/intel/apollolake/flash_ctrlr.c delete mode 100644 src/soc/intel/apollolake/include/soc/flash_ctrlr.h (limited to 'src') diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index 852dfadaf0..d60f85eccf 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -54,6 +54,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_ACPI select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_FAST_SPI select SOC_INTEL_COMMON_BLOCK_ITSS select SOC_INTEL_COMMON_BLOCK_LPSS select SOC_INTEL_COMMON_BLOCK_PCR diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc index 1d5bac8ddb..36455f366f 100644 --- a/src/soc/intel/apollolake/Makefile.inc +++ b/src/soc/intel/apollolake/Makefile.inc @@ -11,7 +11,6 @@ subdirs-y += ../../../cpu/x86/cache bootblock-y += bootblock/bootblock.c bootblock-y += bootblock/bootblock.c bootblock-y += car.c -bootblock-y += flash_ctrlr.c bootblock-y += gpio.c bootblock-y += heci.c bootblock-y += lpc_lib.c @@ -24,7 +23,6 @@ bootblock-$(CONFIG_FSP_CAR) += bootblock/cache_as_ram_fsp.S romstage-y += car.c romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c -romstage-y += flash_ctrlr.c romstage-y += gpio.c romstage-y += heci.c romstage-y += i2c_early.c @@ -38,7 +36,6 @@ romstage-y += pmutil.c romstage-y += reset.c romstage-y += spi.c -smm-y += flash_ctrlr.c smm-y += mmap_boot.c smm-y += pmutil.c smm-y += gpio.c @@ -52,7 +49,6 @@ ramstage-y += cpu.c ramstage-y += chip.c ramstage-y += cse.c ramstage-y += elog.c -ramstage-y += flash_ctrlr.c ramstage-y += dsp.c ramstage-y += gpio.c ramstage-y += graphics.c @@ -79,7 +75,6 @@ ramstage-y += xdci.c ramstage-y += xhci.c ramstage-y += sd.c -postcar-y += flash_ctrlr.c postcar-y += memmap.c postcar-y += mmap_boot.c postcar-y += spi.c @@ -89,7 +84,6 @@ postcar-y += tsc_freq.c postcar-$(CONFIG_FSP_CAR) += exit_car_fsp.S verstage-y += car.c -verstage-y += flash_ctrlr.c verstage-y += i2c_early.c verstage-y += heci.c verstage-y += memmap.c diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c index 8a56890af5..2c98be4fae 100644 --- a/src/soc/intel/apollolake/bootblock/bootblock.c +++ b/src/soc/intel/apollolake/bootblock/bootblock.c @@ -18,13 +18,13 @@ #include #include #include +#include #include -#include #include +#include #include #include #include -#include #include #include #include @@ -92,35 +92,6 @@ static void cache_bios_region(void) set_var_mtrr(mtrr, 4ULL*GiB - rom_size, rom_size, MTRR_TYPE_WRPROT); } -/* - * Program temporary BAR for SPI in case any of the stages before ramstage need - * to access SPI MMIO regs. Ramstage will assign a new BAR during PCI - * enumeration. - */ -static void enable_spibar(void) -{ - device_t dev = PCH_DEV_SPI; - uint8_t val; - - /* Disable Bus Master and MMIO space. */ - val = pci_read_config8(dev, PCI_COMMAND); - val &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config8(dev, PCI_COMMAND, val); - - /* Program Temporary BAR for SPI */ - pci_write_config32(dev, PCI_BASE_ADDRESS_0, - PRERAM_SPI_BASE_ADDRESS | - PCI_BASE_ADDRESS_SPACE_MEMORY); - - /* Enable Bus Master and MMIO Space */ - val = pci_read_config8(dev, PCI_COMMAND); - val |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config8(dev, PCI_COMMAND, val); - - /* Initialize SPI to allow BIOS to write/erase on flash. */ - spi_flash_init(); -} - static void enable_pmcbar(void) { device_t pmc = PCH_DEV_PMC; @@ -152,7 +123,7 @@ void bootblock_soc_early_init(void) enable_pm_timer_emulation(); - enable_spibar(); + fast_spi_early_init(PRERAM_SPI_BASE_ADDRESS); cache_bios_region(); diff --git a/src/soc/intel/apollolake/chip.c b/src/soc/intel/apollolake/chip.c index 3108987329..5211f84383 100644 --- a/src/soc/intel/apollolake/chip.c +++ b/src/soc/intel/apollolake/chip.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -31,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -578,7 +578,7 @@ void platform_fsp_notify_status(enum fsp_notify_phase phase) */ static void spi_flash_init_cb(void *unused) { - spi_flash_init(); + fast_spi_init(); } BOOT_STATE_INIT_ENTRY(BS_PRE_DEVICE, BS_ON_ENTRY, spi_flash_init_cb, NULL); diff --git a/src/soc/intel/apollolake/flash_ctrlr.c b/src/soc/intel/apollolake/flash_ctrlr.c deleted file mode 100644 index 95f540cb18..0000000000 --- a/src/soc/intel/apollolake/flash_ctrlr.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2016 Intel Corp. - * (Written by Alexandru Gagniuc for Intel Corp.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define __SIMPLE_DEVICE__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Helper to create a SPI context on API entry. */ -#define BOILERPLATE_CREATE_CTX(ctx) \ - struct spi_flash_ctx real_ctx; \ - struct spi_flash_ctx *ctx = &real_ctx; \ - _get_spi_flash_ctx(ctx) - -/* - * Anything that's not success is <0. Provided solely for readability, as these - * constants are not used outside this file. - */ -enum errors { - SUCCESS = 0, - E_NOT_IMPLEMENTED = -1, - E_TIMEOUT = -2, - E_HW_ERROR = -3, - E_ARGUMENT = -4, -}; - -/* Reduce data-passing burden by grouping transaction data in a context. */ -struct spi_flash_ctx { - uintptr_t mmio_base; - device_t pci_dev; - uint32_t hsfsts_on_last_error; -}; - -static void _get_spi_flash_ctx(struct spi_flash_ctx *ctx) -{ - uint32_t bar; - - /* FIXME: use device definition */ - ctx->pci_dev = PCH_DEV_SPI; - - bar = pci_read_config32(ctx->pci_dev, PCI_BASE_ADDRESS_0); - ctx->mmio_base = bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK; - ctx->hsfsts_on_last_error = 0; -} - -/* Read register from the SPI flash controller. 'reg' is the register offset. */ -static uint32_t _spi_flash_ctrlr_reg_read(struct spi_flash_ctx *ctx, - uint16_t reg) -{ - uintptr_t addr = ALIGN_DOWN(ctx->mmio_base + reg, 4); - return read32((void *)addr); -} - -uint32_t spi_flash_ctrlr_reg_read(uint16_t reg) -{ - BOILERPLATE_CREATE_CTX(ctx); - return _spi_flash_ctrlr_reg_read(ctx, reg); -} - -/* Write to register in SPI flash controller. 'reg' is the register offset. */ -static void _spi_flash_ctrlr_reg_write(struct spi_flash_ctx *ctx, uint16_t reg, - uint32_t val) -{ - uintptr_t addr = ALIGN_DOWN(ctx->mmio_base + reg, 4); - write32((void *)addr, val); - -} - -/* - * The hardware datasheet is not clear on what HORD values actually do. It - * seems that HORD_SFDP provides access to the first 8 bytes of the SFDP, which - * is the signature and revision fields. HORD_JEDEC provides access to the - * actual flash parameters, and is most likely what you want to use when - * probing the flash from software. - * It's okay to rely on SFPD, since the SPI flash controller requires an SFDP - * 1.5 or newer compliant SPI flash chip. - * NOTE: Due to the register layout of the hardware, all accesses will be - * aligned to a 4 byte boundary. - */ -static uint32_t read_spi_flash_sfdp_param(struct spi_flash_ctx *ctx, - uint16_t sfdp_reg) -{ - uint32_t ptinx_index = sfdp_reg & SPIBAR_PTINX_IDX_MASK; - _spi_flash_ctrlr_reg_write(ctx, SPIBAR_PTINX, - ptinx_index | SPIBAR_PTINX_HORD_JEDEC); - return _spi_flash_ctrlr_reg_read(ctx, SPIBAR_PTDATA); -} - -/* Fill FDATAn FIFO in preparation for a write transaction. */ -static void fill_xfer_fifo(struct spi_flash_ctx *ctx, const void *data, - size_t len) -{ - len = min(len, SPIBAR_FDATA_FIFO_SIZE); - - /* YES! memcpy() works. FDATAn does not require 32-bit accesses. */ - memcpy((void *)(ctx->mmio_base + SPIBAR_FDATA(0)), data, len); -} - -/* Drain FDATAn FIFO after a read transaction populates data. */ -static void drain_xfer_fifo(struct spi_flash_ctx *ctx, void *dest, size_t len) -{ - len = min(len, SPIBAR_FDATA_FIFO_SIZE); - - /* YES! memcpy() works. FDATAn does not require 32-bit accesses. */ - memcpy(dest, (void *)(ctx->mmio_base + SPIBAR_FDATA(0)), len); -} - -/* Fire up a transfer using the hardware sequencer. */ -static void start_hwseq_xfer(struct spi_flash_ctx *ctx, uint32_t hsfsts_cycle, - uint32_t flash_addr, size_t len) -{ - /* Make sure all W1C status bits get cleared. */ - uint32_t hsfsts = SPIBAR_HSFSTS_W1C_BITS; - /* Set up transaction parameters. */ - hsfsts |= hsfsts_cycle & SPIBAR_HSFSTS_FCYCLE_MASK; - hsfsts |= SPIBAR_HSFSTS_FBDC(len - 1); - - _spi_flash_ctrlr_reg_write(ctx, SPIBAR_FADDR, flash_addr); - _spi_flash_ctrlr_reg_write(ctx, SPIBAR_HSFSTS_CTL, - hsfsts | SPIBAR_HSFSTS_FGO); -} - -static void print_xfer_error(struct spi_flash_ctx *ctx, - const char *failure_reason, uint32_t flash_addr) -{ - printk(BIOS_ERR, "SPI Transaction %s at flash offset %x.\n" - "\tHSFSTS = 0x%08x\n", - failure_reason, flash_addr, ctx->hsfsts_on_last_error); -} - -static int wait_for_hwseq_xfer(struct spi_flash_ctx *ctx) -{ - uint32_t hsfsts; - do { - hsfsts = _spi_flash_ctrlr_reg_read(ctx, SPIBAR_HSFSTS_CTL); - - if (hsfsts & SPIBAR_HSFSTS_FCERR) { - ctx->hsfsts_on_last_error = hsfsts; - return E_HW_ERROR; - } - /* TODO: set up timer and abort on timeout */ - } while (!(hsfsts & SPIBAR_HSFSTS_FDONE)); - - return SUCCESS; -} - -/* Execute SPI flash transfer. This is a blocking call. */ -static int exec_sync_hwseq_xfer(struct spi_flash_ctx *ctx, - uint32_t hsfsts_cycle, uint32_t flash_addr, - size_t len) -{ - int ret; - start_hwseq_xfer(ctx, hsfsts_cycle, flash_addr, len); - ret = wait_for_hwseq_xfer(ctx); - if (ret != SUCCESS) { - const char *reason = (ret == E_TIMEOUT) ? "timeout" : "error"; - print_xfer_error(ctx, reason, flash_addr); - } - return ret; -} - -unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len) -{ - return MIN(buf_len, SPIBAR_FDATA_FIFO_SIZE); -} - -/* - * Write-protection status for BIOS region (BIOS_CONTROL register): - * EISS/WPD bits 00 01 10 11 - * -- -- -- -- - * normal mode RO RW RO RO - * SMM mode RO RW RO RW - */ -void spi_flash_init(void) -{ - uint32_t bios_ctl; - - BOILERPLATE_CREATE_CTX(ctx); - - bios_ctl = pci_read_config32(ctx->pci_dev, SPIBAR_BIOS_CONTROL); - bios_ctl |= SPIBAR_BIOS_CONTROL_WPD; - bios_ctl &= ~SPIBAR_BIOS_CONTROL_EISS; - - /* Enable Prefetching and caching. */ - bios_ctl |= SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE; - bios_ctl &= ~SPIBAR_BIOS_CONTROL_CACHE_DISABLE; - - pci_write_config32(ctx->pci_dev, SPIBAR_BIOS_CONTROL, bios_ctl); -} - -/* Flash device operations. */ -static struct spi_flash boot_flash CAR_GLOBAL; - -static int nuclear_spi_flash_erase(const struct spi_flash *flash, - uint32_t offset, size_t len) -{ - int ret; - size_t erase_size; - uint32_t erase_cycle; - - BOILERPLATE_CREATE_CTX(ctx); - - if (!IS_ALIGNED(offset, 4 * KiB) || !IS_ALIGNED(len, 4 * KiB)) { - printk(BIOS_ERR, "BUG! SPI erase region not sector aligned.\n"); - return E_ARGUMENT; - } - - while (len) { - if (IS_ALIGNED(offset, 64 * KiB) && (len >= 64 * KiB)) { - erase_size = 64 * KiB; - erase_cycle = SPIBAR_HSFSTS_CYCLE_64K_ERASE; - } else { - erase_size = 4 * KiB; - erase_cycle = SPIBAR_HSFSTS_CYCLE_4K_ERASE; - } - printk(BIOS_SPEW, "Erasing flash addr %x + %zu KiB\n", - offset, erase_size / KiB); - - ret = exec_sync_hwseq_xfer(ctx, erase_cycle, offset, 0); - if (ret != SUCCESS) - return ret; - - offset += erase_size; - len -= erase_size; - } - - return SUCCESS; -} - -/* - * Ensure read/write xfer len is not greater than SPIBAR_FDATA_FIFO_SIZE and - * that the operation does not cross 256-byte boundary. - */ -static size_t get_xfer_len(uint32_t addr, size_t len) -{ - size_t xfer_len = min(len, SPIBAR_FDATA_FIFO_SIZE); - size_t bytes_left = ALIGN_UP(addr, 256) - addr; - - if (bytes_left) - xfer_len = min(xfer_len, bytes_left); - - return xfer_len; -} - -static int nuclear_spi_flash_read(const struct spi_flash *flash, uint32_t addr, - size_t len, void *buf) -{ - int ret; - size_t xfer_len; - uint8_t *data = buf; - - BOILERPLATE_CREATE_CTX(ctx); - - while (len) { - xfer_len = get_xfer_len(addr, len); - - ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_READ, - addr, xfer_len); - if (ret != SUCCESS) - return ret; - - drain_xfer_fifo(ctx, data, xfer_len); - - addr += xfer_len; - data += xfer_len; - len -= xfer_len; - } - - return SUCCESS; -} - -static int nuclear_spi_flash_write(const struct spi_flash *flash, uint32_t addr, - size_t len, const void *buf) -{ - int ret; - size_t xfer_len; - const uint8_t *data = buf; - - BOILERPLATE_CREATE_CTX(ctx); - - while (len) { - xfer_len = get_xfer_len(addr, len); - fill_xfer_fifo(ctx, data, xfer_len); - - ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_WRITE, - addr, xfer_len); - if (ret != SUCCESS) - return ret; - - addr += xfer_len; - data += xfer_len; - len -= xfer_len; - } - - return SUCCESS; -} - -static int nuclear_spi_flash_status(const struct spi_flash *flash, uint8_t *reg) -{ - int ret; - BOILERPLATE_CREATE_CTX(ctx); - - ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_RD_STATUS, 0, - sizeof(*reg)); - if (ret != SUCCESS) - return ret; - - drain_xfer_fifo(ctx, reg, sizeof(*reg)); - return ret; -} - -/* - * We can't use FDOC and FDOD to read FLCOMP, as previous platforms did. - * For details see: - * Ch 31, SPI: p. 194 - * The size of the flash component is always taken from density field in the - * SFDP table. FLCOMP.C0DEN is no longer used by the Flash Controller. - */ -struct spi_flash *spi_flash_programmer_probe(struct spi_slave *dev, int force) -{ - BOILERPLATE_CREATE_CTX(ctx); - struct spi_flash *flash; - uint32_t flash_bits; - - flash = car_get_var_ptr(&boot_flash); - - /* - * bytes = (bits + 1) / 8; - * But we need to do the addition in a way which doesn't overflow for - * 4 Gbit devices (flash_bits == 0xffffffff). - */ - /* FIXME: Don't hardcode 0x04 ? */ - flash_bits = read_spi_flash_sfdp_param(ctx, 0x04); - flash->size = (flash_bits >> 3) + 1; - - memcpy(&flash->spi, dev, sizeof(*dev)); - flash->name = "Apollolake hardware sequencer"; - - /* Can erase both 4 KiB and 64 KiB chunks. Declare the smaller size. */ - flash->sector_size = 4 * KiB; - /* - * FIXME: Get erase+cmd, and status_cmd from SFDP. - * - * flash->erase_cmd = ??? - * flash->status_cmd = ??? - */ - - flash->internal_write = nuclear_spi_flash_write; - flash->internal_erase = nuclear_spi_flash_erase; - flash->internal_read = nuclear_spi_flash_read; - flash->internal_status = nuclear_spi_flash_status; - - return flash; -} - -int spi_flash_get_fpr_info(struct fpr_info *info) -{ - BOILERPLATE_CREATE_CTX(ctx); - - if (!ctx->mmio_base) - return -1; - - info->base = ctx->mmio_base + SPIBAR_FPR_BASE; - info->max = SPIBAR_FPR_MAX; - - return 0; -} diff --git a/src/soc/intel/apollolake/include/soc/flash_ctrlr.h b/src/soc/intel/apollolake/include/soc/flash_ctrlr.h deleted file mode 100644 index 336ce5266f..0000000000 --- a/src/soc/intel/apollolake/include/soc/flash_ctrlr.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2016 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _SOC_APOLLOLAKE_SPI_H_ -#define _SOC_APOLLOLAKE_SPI_H_ - -/* PCI configuration registers */ -#define SPIBAR_BIOS_CONTROL 0xdc -/* Bit definitions for BIOS_CONTROL */ -#define SPIBAR_BIOS_CONTROL_WPD (1 << 0) -#define SPIBAR_BIOS_CONTROL_CACHE_DISABLE (1 << 2) -#define SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE (1 << 3) -#define SPIBAR_BIOS_CONTROL_EISS (1 << 5) - -/* Maximum bytes of data that can fit in FDATAn registers */ -#define SPIBAR_FDATA_FIFO_SIZE 0x40 - -/* Register offsets from the MMIO region base (PCI_BASE_ADDRESS_0) */ -#define SPIBAR_BIOS_BFPREG 0x00 -#define SPIBAR_HSFSTS_CTL 0x04 -#define SPIBAR_FADDR 0x08 -#define SPIBAR_FDATA(n) (0x10 + ((n) & 0xf) * 4) -#define SPIBAR_FPR_BASE 0x84 -#define SPIBAR_PTINX 0xcc -#define SPIBAR_PTDATA 0xd0 - -#define SPIBAR_FPR_MAX 5 - -/* Bit definitions and masks for BIOS_BFPREG register. */ -#define SPIBAR_BFPREG_PRB_MASK (0x7fff) -#define SPIBAR_BFPREG_PRL_SHIFT (16) -#define SPIBAR_BFPREG_PRL_MASK (0x7fff << SPIBAR_BFPREG_PRL_SHIFT) -#define SPIBAR_BFPREG_SBRS (1 << 31) - -/* Bit definitions for HSFSTS_CTL register */ -#define SPIBAR_HSFSTS_FBDC_MASK (0x3f << 24) -#define SPIBAR_HSFSTS_FBDC(n) (((n) << 24) & SPIBAR_HSFSTS_FBDC_MASK) -#define SPIBAR_HSFSTS_WET (1 << 21) -#define SPIBAR_HSFSTS_FCYCLE_MASK (0xf << 17) -#define SPIBAR_HSFSTS_FCYCLE(cyc) (((cyc) << 17) \ - & SPIBAR_HSFSTS_FCYCLE_MASK) -#define SPIBAR_HSFSTS_FGO (1 << 16) -#define SPIBAR_HSFSTS_FLOCKDN (1 << 15) -#define SPIBAR_HSFSTS_FDV (1 << 14) -#define SPIBAR_HSFSTS_FDOPSS (1 << 13) -#define SPIBAR_HSFSTS_SAF_CE (1 << 8) -#define SPIBAR_HSFSTS_SAF_ACTIVE (1 << 7) -#define SPIBAR_HSFSTS_SAF_LE (1 << 6) -#define SPIBAR_HSFSTS_SCIP (1 << 5) -#define SPIBAR_HSFSTS_SAF_DLE (1 << 4) -#define SPIBAR_HSFSTS_SAF_ERROR (1 << 3) -#define SPIBAR_HSFSTS_AEL (1 << 2) -#define SPIBAR_HSFSTS_FCERR (1 << 1) -#define SPIBAR_HSFSTS_FDONE (1 << 0) -#define SPIBAR_HSFSTS_W1C_BITS (0xff) -/* Supported flash cycle types */ -#define SPIBAR_HSFSTS_CYCLE_READ SPIBAR_HSFSTS_FCYCLE(0) -#define SPIBAR_HSFSTS_CYCLE_WRITE SPIBAR_HSFSTS_FCYCLE(2) -#define SPIBAR_HSFSTS_CYCLE_4K_ERASE SPIBAR_HSFSTS_FCYCLE(3) -#define SPIBAR_HSFSTS_CYCLE_64K_ERASE SPIBAR_HSFSTS_FCYCLE(4) -#define SPIBAR_HSFSTS_CYCLE_RD_STATUS SPIBAR_HSFSTS_FCYCLE(8) - -/* Bit definitions for PTINX register */ -#define SPIBAR_PTINX_COMP_0 (0 << 14) -#define SPIBAR_PTINX_COMP_1 (1 << 14) -#define SPIBAR_PTINX_HORD_SFDP (0 << 12) -#define SPIBAR_PTINX_HORD_PARAM (1 << 12) -#define SPIBAR_PTINX_HORD_JEDEC (2 << 12) -#define SPIBAR_PTINX_IDX_MASK 0xffc - -/* - * Reads status register. On success returns 0 and status contains the value - * read from the status register. On error returns -1. - */ -int spi_flash_read_status(uint8_t *status); - -/* Read SPI controller register. */ -uint32_t spi_flash_ctrlr_reg_read(uint16_t reg); - -void spi_flash_init(void); -#endif diff --git a/src/soc/intel/apollolake/mmap_boot.c b/src/soc/intel/apollolake/mmap_boot.c index 50d0ff0590..598c068428 100644 --- a/src/soc/intel/apollolake/mmap_boot.c +++ b/src/soc/intel/apollolake/mmap_boot.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include /* @@ -65,7 +65,7 @@ static struct xlate_region_device real_dev CAR_GLOBAL; static void bios_mmap_init(void) { - size_t size, start, bios_end, bios_mapped_size; + size_t size, start, bios_mapped_size; uintptr_t base; size = car_get_var(bios_size); @@ -73,18 +73,7 @@ static void bios_mmap_init(void) /* If bios_size is initialized, then bail out. */ if (size != 0) return; - - /* - * BIOS_BFPREG provides info about BIOS Flash Primary Region - * Base and Limit. - * Base and Limit fields are in units of 4KiB. - */ - uint32_t val = spi_flash_ctrlr_reg_read(SPIBAR_BIOS_BFPREG); - - start = (val & SPIBAR_BFPREG_PRB_MASK) * 4 * KiB; - bios_end = (((val & SPIBAR_BFPREG_PRL_MASK) >> - SPIBAR_BFPREG_PRL_SHIFT) + 1) * 4 * KiB; - size = bios_end - start; + start = fast_spi_get_bios_region(&size); /* BIOS region is mapped right below 4G. */ base = 4ULL * GiB - size; diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c index c1353c8240..98c70156da 100644 --- a/src/soc/intel/apollolake/romstage.c +++ b/src/soc/intel/apollolake/romstage.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3