From e34e178ca3f31064e9c4cced4243524d08579007 Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Thu, 29 Sep 2016 12:33:01 +0200 Subject: sio/ite/common: Add generic environment-controller driver The environment-controller entity is shared by many ITE super-i/o chips. There are some differences between the chips, though. To cover that, the super-i/o chip should select Kconfig options of this driver accordingly. The current implementation isn't exhaustive: It covers only those parts that are connected on boards I could test, plus those that are currently used by the IT8772F. The latter could be ported to use this driver if somebody minds to test it. Change-Id: I7a40f677f667d103ce1d09a3e468915729067803 Signed-off-by: Nico Huber Reviewed-on: https://review.coreboot.org/17284 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/superio/ite/Makefile.inc | 3 + src/superio/ite/common/Kconfig | 24 ++++ src/superio/ite/common/env_ctrl.c | 250 +++++++++++++++++++++++++++++++++ src/superio/ite/common/env_ctrl.h | 135 ++++++++++++++++++ src/superio/ite/common/env_ctrl_chip.h | 100 +++++++++++++ 5 files changed, 512 insertions(+) create mode 100644 src/superio/ite/common/env_ctrl.c create mode 100644 src/superio/ite/common/env_ctrl.h create mode 100644 src/superio/ite/common/env_ctrl_chip.h (limited to 'src') diff --git a/src/superio/ite/Makefile.inc b/src/superio/ite/Makefile.inc index eb073d441d..487beb1709 100644 --- a/src/superio/ite/Makefile.inc +++ b/src/superio/ite/Makefile.inc @@ -16,6 +16,9 @@ ## include generic ite pre-ram stage driver romstage-$(CONFIG_SUPERIO_ITE_COMMON_ROMSTAGE) += common/early_serial.c +## include generic ite environment controller driver +ramstage-$(CONFIG_SUPERIO_ITE_ENV_CTRL) += common/env_ctrl.c + subdirs-y += it8671f subdirs-y += it8712f subdirs-y += it8716f diff --git a/src/superio/ite/common/Kconfig b/src/superio/ite/common/Kconfig index 165944b7e2..162b7f1545 100644 --- a/src/superio/ite/common/Kconfig +++ b/src/superio/ite/common/Kconfig @@ -3,6 +3,7 @@ ## ## Copyright (C) 2009 Ronald G. Minnich ## Copyright (C) 2014 Edward O'Callaghan +## Copyright (C) 2016 secunet Security Networks AG ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by @@ -18,3 +19,26 @@ # romstage. config SUPERIO_ITE_COMMON_ROMSTAGE bool + +# Generic ITE environment controller driver +config SUPERIO_ITE_ENV_CTRL + bool + +if SUPERIO_ITE_ENV_CTRL + +config SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG + bool + help + Enable extended, 16-bit wide tacho counters. + +config SUPERIO_ITE_ENV_CTRL_8BIT_PWM + bool + help + PWM duty cycles are set in 8-bit registers (instead of 7 bit). + +config SUPERIO_ITE_ENV_CTRL_PWM_FREQ2 + bool + help + The second FAN controller has a separate frequency setting. + +endif diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c new file mode 100644 index 0000000000..4ce6ccc50d --- /dev/null +++ b/src/superio/ite/common/env_ctrl.c @@ -0,0 +1,250 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2016 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include "env_ctrl.h" +#include "env_ctrl_chip.h" + +static inline u8 ite_ec_read(const u16 base, const u8 addr) +{ + outb(addr, base + 5); + return inb(base + 6); +} + +static inline void ite_ec_write(const u16 base, const u8 addr, const u8 value) +{ + outb(addr, base + 5); + outb(value, base + 6); +} + +static void extemp_force_idle_status(const u16 base) +{ + u8 reg; + int retries = 10; + + /* Wait up to 10ms for non-busy state. */ + while (retries > 0) { + reg = ite_ec_read(base, ITE_EC_EXTEMP_STATUS); + + if ((reg & ITE_EC_EXTEMP_STATUS_HOST_BUSY) == 0x0) + break; + + retries--; + + mdelay(1); + } + + if (retries == 0 && (reg & ITE_EC_EXTEMP_STATUS_HOST_BUSY) == 0x1) { + /* + * SIO is busy due to unfinished peci transaction. + * Re-configure Register 0x8E to terminate processes. + */ + ite_ec_write(base, ITE_EC_EXTEMP_CONTROL, + ITE_EC_EXTEMP_CTRL_AUTO_4HZ | + ITE_EC_EXTEMP_CTRL_AUTO_START); + } +} + +/* + * Setup External Temperature to read via PECI into TMPINx register + */ +static void enable_peci(const u16 base, const u8 tmpin) +{ + if (tmpin == 0 || tmpin > ITE_EC_TMPIN_CNT) + return; + + /* Enable PECI interface */ + ite_ec_write(base, ITE_EC_INTERFACE_SELECT, + ITE_EC_INTERFACE_SEL_PECI | + ITE_EC_INTERFACE_SPEED_TOLERANCE); + + /* Setup External Temperature using PECI GetTemp */ + ite_ec_write(base, ITE_EC_EXTEMP_ADDRESS, + PECI_CLIENT_ADDRESS); + ite_ec_write(base, ITE_EC_EXTEMP_COMMAND, + PECI_GETTEMP_COMMAND); + ite_ec_write(base, ITE_EC_EXTEMP_WRITE_LENGTH, + PECI_GETTEMP_WRITE_LENGTH); + ite_ec_write(base, ITE_EC_EXTEMP_READ_LENGTH, + PECI_GETTEMP_READ_LENGTH); + ite_ec_write(base, ITE_EC_EXTEMP_CONTROL, + ITE_EC_EXTEMP_CTRL_AUTO_4HZ | + ITE_EC_EXTEMP_CTRL_AUTO_START); + + /* External Temperature reported in TMPINx register */ + ite_ec_write(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE, + (tmpin & 3) << 6); +} + +/* + * Set up External Temperature to read via thermal diode/resistor + * into TMPINx register + */ +static void enable_tmpin(const u16 base, const int tmpin, + const enum ite_ec_thermal_mode mode) +{ + u8 reg; + + reg = ite_ec_read(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE); + + switch (mode) { + case THERMAL_DIODE: + reg |= ITE_EC_ADC_TEMP_DIODE_MODE(tmpin); + break; + case THERMAL_RESISTOR: + reg |= ITE_EC_ADC_TEMP_RESISTOR_MODE(tmpin); + break; + default: + printk(BIOS_WARNING, + "Unsupported thermal mode 0x%x on TMPIN%d\n", + mode, tmpin); + return; + } + + ite_ec_write(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE, reg); + + /* Enable the startup of monitoring operation */ + reg = ite_ec_read(base, ITE_EC_CONFIGURATION); + reg |= ITE_EC_CONFIGURATION_START; + ite_ec_write(base, ITE_EC_CONFIGURATION, reg); +} + +static void fan_smartconfig(const u16 base, const u8 fan, + const enum ite_ec_fan_mode mode, + const struct ite_ec_fan_smartconfig *const conf) +{ + u8 pwm_ctrl; + u8 pwm_start = 0; + u8 pwm_auto = 0; + + if (mode == FAN_SMART_SOFTWARE) { + pwm_ctrl = ITE_EC_FAN_CTL_PWM_MODE_SOFTWARE; + + /* 50% duty cycle by default */ + const u8 duty = conf->pwm_start ? conf->pwm_start : 50; + if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM)) + pwm_start = ITE_EC_FAN_CTL_PWM_DUTY(duty); + else + pwm_ctrl |= ITE_EC_FAN_CTL_PWM_DUTY(duty); + } else { + pwm_ctrl = ITE_EC_FAN_CTL_PWM_MODE_AUTOMATIC; + pwm_ctrl |= ITE_EC_FAN_CTL_TEMPIN(conf->tmpin); + + pwm_start = ITE_EC_FAN_CTL_PWM_START_DUTY(conf->pwm_start); + pwm_start |= ITE_EC_FAN_CTL_PWM_SLOPE_BIT6(conf->slope); + + pwm_auto = ITE_EC_FAN_CTL_PWM_SLOPE_LOWER(conf->slope); + + ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(fan), + conf->tmp_off); + ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_START(fan), + conf->tmp_start); + /* Full speed above 127°C by default */ + ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(fan), + conf->tmp_full ? conf->tmp_full : 127); + ite_ec_write(base, ITE_EC_FAN_CTL_DELTA_TEMP(fan), + ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(conf->tmp_delta)); + } + + ite_ec_write(base, ITE_EC_FAN_CTL_PWM_CONTROL(fan), pwm_ctrl); + ite_ec_write(base, ITE_EC_FAN_CTL_PWM_START(fan), pwm_start); + ite_ec_write(base, ITE_EC_FAN_CTL_PWM_AUTO(fan), pwm_auto); +} + +static void enable_fan(const u16 base, const u8 fan, + const struct ite_ec_fan_config *const conf) +{ + u8 reg; + + if (conf->mode == FAN_IGNORE) + return; + + /* FAN_CTL2 might have its own frequency setting */ + if (IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) { + reg = ite_ec_read(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE); + reg &= ~ITE_EC_FAN_PWM_CLOCK_MASK; + reg |= ITE_EC_FAN_PWM_DEFAULT_CLOCK; + ite_ec_write(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE, reg); + } + + if (conf->mode >= FAN_SMART_SOFTWARE) { + fan_smartconfig(base, fan, conf->mode, &conf->smart); + } else { + reg = ite_ec_read(base, ITE_EC_FAN_CTL_MODE); + if (conf->mode == FAN_MODE_ON) + reg |= ITE_EC_FAN_CTL_ON(fan); + else + reg &= ~ITE_EC_FAN_CTL_ON(fan); + ite_ec_write(base, ITE_EC_FAN_CTL_MODE, reg); + } + + if (IS_ENABLED(SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG) + && conf->mode >= FAN_MODE_ON) { + reg = ite_ec_read(base, ITE_EC_FAN_TAC_COUNTER_ENABLE); + reg |= ITE_EC_FAN_TAC_16BIT_ENABLE(fan); + ite_ec_write(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg); + } + + reg = ite_ec_read(base, ITE_EC_FAN_MAIN_CTL); + if (conf->mode >= FAN_MODE_ON) + reg |= ITE_EC_FAN_MAIN_CTL_TAC_EN(fan); + else + reg &= ~ITE_EC_FAN_MAIN_CTL_TAC_EN(fan); + if (conf->mode >= FAN_SMART_SOFTWARE) + reg |= ITE_EC_FAN_MAIN_CTL_SMART(fan); + else + reg &= ~ITE_EC_FAN_MAIN_CTL_SMART(fan); + ite_ec_write(base, ITE_EC_FAN_MAIN_CTL, reg); +} + +void ite_ec_init(const u16 base, const struct ite_ec_config *const conf) +{ + size_t i; + + /* Configure 23.43kHz PWM active high output */ + u8 fan_ctl = ite_ec_read(base, ITE_EC_FAN_CTL_MODE); + fan_ctl &= ~ITE_EC_FAN_PWM_CLOCK_MASK; + fan_ctl |= ITE_EC_FAN_PWM_DEFAULT_CLOCK; + fan_ctl |= ITE_EC_FAN_CTL_POLARITY_HIGH; + ite_ec_write(base, ITE_EC_FAN_CTL_MODE, fan_ctl); + + /* Enable PECI if configured */ + enable_peci(base, conf->peci_tmpin); + + /* Enable HWM if configured */ + for (i = 0; i < ITE_EC_TMPIN_CNT; ++i) + enable_tmpin(base, i + 1, conf->tmpin_mode[i]); + + /* Enable reading of voltage pins */ + ite_ec_write(base, ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE, conf->vin_mask); + + /* Enable FANx if configured */ + for (i = 0; i < ITE_EC_FAN_CNT; ++i) + enable_fan(base, i + 1, &conf->fan[i]); + + /* + * System may get wrong temperature data when SIO is in + * busy state. Therefore, check the status and terminate + * processes if needed. + */ + if (conf->peci_tmpin != 0) + extemp_force_idle_status(base); +} diff --git a/src/superio/ite/common/env_ctrl.h b/src/superio/ite/common/env_ctrl.h new file mode 100644 index 0000000000..fa131166c0 --- /dev/null +++ b/src/superio/ite/common/env_ctrl.h @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2016 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SUPERIO_ITE_ENV_CTRL_H +#define SUPERIO_ITE_ENV_CTRL_H + +#include "env_ctrl_chip.h" + +#if IS_ENABLED(CONFIG_SUPERIO_ITE_ENV_CTRL_8BIT_PWM) +#define ITE_EC_FAN_MAX_PWM 0xff +#define ITE_EC_FAN_PWM_DEFAULT_CLOCK ITE_EC_FAN_PWM_CLOCK_6MHZ +#else +#define ITE_EC_FAN_MAX_PWM 0x7f +#define ITE_EC_FAN_PWM_DEFAULT_CLOCK ITE_EC_FAN_PWM_CLOCK_3MHZ +#endif + +#define ITE_EC_CONFIGURATION 0x00 +#define ITE_EC_CONFIGURATION_START (1 << 0) + +#define ITE_EC_INTERFACE_SELECT 0x0a +#define ITE_EC_INTERFACE_PSEUDO_EOC (1 << 7) +#define ITE_EC_INTERFACE_SMB_ENABLE (1 << 6) +#define ITE_EC_INTERFACE_SEL_DISABLE (0 << 4) +#define ITE_EC_INTERFACE_SEL_SST_SLAVE (1 << 4) +#define ITE_EC_INTERFACE_SEL_PECI (2 << 4) +#define ITE_EC_INTERFACE_SEL_SST_HOST (3 << 4) +#define ITE_EC_INTERFACE_CLOCK_32MHZ (0 << 3) +#define ITE_EC_INTERFACE_CLOCK_24MHZ (1 << 3) +#define ITE_EC_INTERFACE_SPEED_TOLERANCE (1 << 2) +#define ITE_EC_INTERFACE_PECI_AWFCS (1 << 0) + +#define ITE_EC_FAN_PWM_SMOOTHING_FREQ 0x0b +#define ITE_EC_FAN_PWM_SMOOTHING_MASK (3 << 6) +#define ITE_EC_FAN_PWM_SMOOTHING_1KHZ (0 << 6) +#define ITE_EC_FAN_PWM_SMOOTHING_256HZ (1 << 6) +#define ITE_EC_FAN_PWM_SMOOTHING_64HZ (2 << 6) +#define ITE_EC_FAN_PWM_SMOOTHING_16HZ (3 << 6) + +#define ITE_EC_FAN_TAC_COUNTER_ENABLE 0x0c +#define ITE_EC_FAN_TAC_16BIT_ENABLE(x) (1 << ((x)-1)) +#define ITE_EC_FAN_TAC_LIMIT(x) (0x10 + ((x)-1)) +#define ITE_EC_FAN_TAC_EXT_LIMIT(x) (0x1b + ((x)-1)) + +#define ITE_EC_FAN_MAIN_CTL 0x13 +#define ITE_EC_FAN_MAIN_CTL_TAC_EN(x) (1 << ((x)+3)) +#define ITE_EC_FAN_MAIN_CTL_COLL_FULL_SPEED (1 << 3) +#define ITE_EC_FAN_MAIN_CTL_SMART(x) (1 << ((x)-1)) +#define ITE_EC_FAN_CTL_MODE 0x14 +#define ITE_EC_FAN_CTL_POLARITY_HIGH (1 << 7) +#define ITE_EC_FAN_PWM_CLOCK_MASK (7 << 4) +#define ITE_EC_FAN_PWM_CLOCK_48MHZ (0 << 4) +#define ITE_EC_FAN_PWM_CLOCK_24MHZ (1 << 4) +#define ITE_EC_FAN_PWM_CLOCK_12MHZ (2 << 4) +#define ITE_EC_FAN_PWM_CLOCK_8MHZ (3 << 4) +#define ITE_EC_FAN_PWM_CLOCK_6MHZ (4 << 4) +#define ITE_EC_FAN_PWM_CLOCK_3MHZ (5 << 4) +#define ITE_EC_FAN_PWM_CLOCK_1_5MHZ (6 << 4) +#define ITE_EC_FAN_PWM_CLOCK_51KHZ (7 << 4) +#define ITE_EC_FAN_PWM_MIN_DUTY_20 (1 << 3) +#define ITE_EC_FAN_CTL_ON(x) (1 << ((x)-1)) +#define ITE_EC_FAN_CTL_PWM_CONTROL(x) (0x15 + ((x)-1)) +#define ITE_EC_FAN_CTL_PWM_MODE_SOFTWARE (0 << 7) +#define ITE_EC_FAN_CTL_PWM_MODE_AUTOMATIC (1 << 7) +#define ITE_EC_FAN_CTL_PWM_DUTY_MASK (ITE_EC_FAN_MAX_PWM << 0) +#define ITE_EC_FAN_CTL_PWM_DUTY(p) \ + ({ \ + const unsigned int _p = p; \ + (_p >= 100) \ + ? ITE_EC_FAN_MAX_PWM \ + : (_p * ITE_EC_FAN_MAX_PWM) / 100; \ + }) +#define ITE_EC_FAN_CTL_TEMPIN_MASK (3 << 0) +#define ITE_EC_FAN_CTL_TEMPIN(x) (((x)-1) & 3) + +#define ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE 0x50 +#define ITE_EC_ADC_TEMP_CHANNEL_ENABLE 0x51 +#define ITE_EC_ADC_TEMP_EXT_REPORTS_TO(x) (((x) & 3) << 6) +#define ITE_EC_ADC_TEMP_RESISTOR_MODE(x) (1 << ((x)+2)) +#define ITE_EC_ADC_TEMP_DIODE_MODE(x) (1 << ((x)-1)) +#define ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE 0x55 + +#define ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(x) (0x60 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_TEMP_LIMIT_START(x) (0x61 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(x) (0x62 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_PWM_START(x) (0x63 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_PWM_SLOPE_BIT6(s) (((s) & 0x40) << 1) +#define ITE_EC_FAN_CTL_PWM_START_DUTY(p) ITE_EC_FAN_CTL_PWM_DUTY(p) +#define ITE_EC_FAN_CTL_PWM_AUTO(x) (0x64 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7) +#define ITE_EC_FAN_CTL_PWM_SLOPE_LOWER(s) ((s) & 0x3f) +#define ITE_EC_FAN_CTL_DELTA_TEMP(x) (0x65 + ((x)-1) * 8) +#define ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(c) ((c) & 0x1f) + +#define ITE_EC_EXTEMP_STATUS 0x88 +#define ITE_EC_EXTEMP_STATUS_HOST_BUSY (1 << 0) +#define ITE_EC_EXTEMP_ADDRESS 0x89 +#define ITE_EC_EXTEMP_WRITE_LENGTH 0x8a +#define ITE_EC_EXTEMP_READ_LENGTH 0x8b +#define ITE_EC_EXTEMP_COMMAND 0x8c +#define ITE_EC_EXTEMP_WRITE_DATA_2 0x8d +#define ITE_EC_EXTEMP_CONTROL 0x8e +#define ITE_EC_EXTEMP_CTRL_AUTO_32HZ (0 << 6) +#define ITE_EC_EXTEMP_CTRL_AUTO_16HZ (1 << 6) +#define ITE_EC_EXTEMP_CTRL_AUTO_8HZ (2 << 6) +#define ITE_EC_EXTEMP_CTRL_AUTO_4HZ (3 << 6) +#define ITE_EC_EXTEMP_CTRL_AUTO_START (1 << 5) +#define ITE_EC_EXTEMP_CTRL_AUTO_ABORT (1 << 4) +#define ITE_EC_EXTEMP_CTRL_AUTO_TWO_DOMAIN (1 << 3) +#define ITE_EC_EXTEMP_CTRL_CONTENTION (1 << 2) +#define ITE_EC_EXTEMP_CTRL_SST_IDLE_HIGH (1 << 1) +#define ITE_EC_EXTEMP_CTRL_START (1 << 0) + +/* Standard PECI GetTemp */ +#define PECI_CLIENT_ADDRESS 0x30 +#define PECI_GETTEMP_COMMAND 0x01 +#define PECI_GETTEMP_WRITE_LENGTH 0x01 +#define PECI_GETTEMP_READ_LENGTH 0x02 + +void ite_ec_init(u16 base, const struct ite_ec_config *conf); + +#endif /* SUPERIO_ITE_ENV_CTRL_H */ diff --git a/src/superio/ite/common/env_ctrl_chip.h b/src/superio/ite/common/env_ctrl_chip.h new file mode 100644 index 0000000000..f01c574d47 --- /dev/null +++ b/src/superio/ite/common/env_ctrl_chip.h @@ -0,0 +1,100 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2016 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SUPERIO_ITE_ENV_CTRL_CHIP_H +#define SUPERIO_ITE_ENV_CTRL_CHIP_H + +#define ITE_EC_TMPIN_CNT 3 +#define ITE_EC_FAN_CNT 3 + +/* Supported thermal mode on TMPINx */ +enum ite_ec_thermal_mode { + THERMAL_MODE_DISABLED = 0, + THERMAL_DIODE, + THERMAL_RESISTOR, +}; + +/* Bit mask for voltage pins VINx */ +enum ite_ec_voltage_pin { + VIN0 = 0x01, + VIN1 = 0x02, + VIN2 = 0x04, + VIN3 = 0x08, + VIN4 = 0x10, + VIN5 = 0x20, + VIN6 = 0x40, + VIN7 = 0x80, + VIN_ALL = 0xff +}; + +enum ite_ec_fan_mode { + FAN_IGNORE = 0, + FAN_MODE_ON, + FAN_MODE_OFF, + FAN_SMART_SOFTWARE, + FAN_SMART_AUTOMATIC, +}; + +struct ite_ec_fan_smartconfig { + u8 tmpin; /* select TMPINx (1, 2 or 3) */ + u8 tmp_off; /* turn fan off below (°C) */ + u8 tmp_start; /* turn fan on above (°C) */ + u8 tmp_full; /* 100% duty cycle above (°C) */ + u8 tmp_delta; /* adapt fan speed when temperature + changed by at least `tmp_delta`°C */ + u8 smoothing; /* enable smoothing */ + u8 pwm_start; /* start at this duty cycle (%) */ + u8 slope; /* increase duty cycle by `slope`%/°C */ +}; + +struct ite_ec_fan_config { + enum ite_ec_fan_mode mode; + struct ite_ec_fan_smartconfig smart; +}; + +struct ite_ec_config { + /* + * Enable external temperature sensor to use PECI GetTemp() + * command and store in register TMPIN 1, 2, or 3. + */ + u8 peci_tmpin; + + /* + * Enable thermal mode on TMPINx. + */ + enum ite_ec_thermal_mode tmpin_mode[ITE_EC_TMPIN_CNT]; + + /* + * Enable reading of voltage pins VINx. + */ + enum ite_ec_voltage_pin vin_mask; + + /* + * Enable a FAN in given mode. + */ + struct ite_ec_fan_config fan[ITE_EC_FAN_CNT]; +}; + +/* Some shorthands for device trees */ +#define TMPIN1 ec.tmpin_mode[0] +#define TMPIN2 ec.tmpin_mode[1] +#define TMPIN3 ec.tmpin_mode[2] +#define FAN1 ec.fan[0] +#define FAN2 ec.fan[1] +#define FAN3 ec.fan[2] + +#endif /* SUPERIO_ITE_ENV_CTRL_CHIP_H */ -- cgit v1.2.3