From de44c0cc36d4e07b38bbf0c0adab76dc145426ea Mon Sep 17 00:00:00 2001 From: Meera Ravindranath Date: Thu, 1 Apr 2021 10:47:57 +0530 Subject: mb/google/brya: Enable WFC 1. Add 1 port and 1 endpoint 2. Add support for OVTI8856 WFC is on I2C0 BUG=None BRANCH=None TEST=Build and boot brya Signed-off-by: Meera Ravindranath Signed-off-by: Varshit B Pandya Change-Id: Ic5e9c28f255bdf86a68ce80a4f853be4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52013 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- src/mainboard/google/brya/Kconfig.name | 2 + src/mainboard/google/brya/dsdt.asl | 1 - .../google/brya/variants/baseboard/devicetree.cb | 89 +++++++++++++++++++++- 3 files changed, 88 insertions(+), 4 deletions(-) (limited to 'src') diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index 70af2d2c5c..2a7a51c1ac 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -5,3 +5,5 @@ config BOARD_GOOGLE_BRYA0 select BOARD_ROMSIZE_KB_32768 select ADL_ENABLE_USB4_PCIE_RESOURCES select DRIVERS_GENESYSLOGIC_GL9755 + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU diff --git a/src/mainboard/google/brya/dsdt.asl b/src/mainboard/google/brya/dsdt.asl index 2bfb49713e..ac5b82ab8d 100644 --- a/src/mainboard/google/brya/dsdt.asl +++ b/src/mainboard/google/brya/dsdt.asl @@ -29,7 +29,6 @@ DefinitionBlock( #include #include #include - #include } } diff --git a/src/mainboard/google/brya/variants/baseboard/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/devicetree.cb index cabbeea670..ddb1ece729 100644 --- a/src/mainboard/google/brya/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/brya/variants/baseboard/devicetree.cb @@ -95,13 +95,12 @@ chip soc/intel/alderlake #+-------------------+---------------------------+ #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | #| GSPI1 | Fingerprint MCU | - #| I2C0 | Audio | + #| I2C0 | Audio and WFC | #| I2C1 | Touchscreen | #| I2C2 | SAR0 | #| I2C3 | cr50 TPM. Early init is | #| | required to set up a BAR | #| | for TPM communication | - #| I2C4 | CAM | #| I2C5 | Trackpad | #+-------------------+---------------------------+ register "common_soc_config" = "{ @@ -130,7 +129,19 @@ chip soc/intel/alderlake device domain 0 on device ref igpu on end device ref dtt on end - device ref ipu on end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on end + end + end device ref tbt_pcie_rp0 on end device ref tbt_pcie_rp1 on end device ref tbt_pcie_rp2 on end @@ -145,6 +156,78 @@ chip soc/intel/alderlake device generic 0 on end end end + + device ref i2c0 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "0" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360 * MHz" # 360 MHz + register "link_freq[1]" = "180 * MHz" # 180 MHz + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "2" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW9768 VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9768"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""AT24 EEPROM"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c1024"" + + register "nvm_size" = "0x2800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x0E" + + device i2c 58 on end + end + end #I2C0 device ref i2c3 on chip drivers/i2c/tpm register "hid" = ""GOOG0005"" -- cgit v1.2.3