From dd3e82ab46987628f2a86f2af1e94adedb35647a Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Sat, 24 Oct 2009 18:15:07 +0000 Subject: Rework the keyboard driver * use readable macro names rather than numbers. * Factor out some commonly used code Signed-off-by: Stefan Reinauer Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4842 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/pc80/keyboard.c | 135 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 91 insertions(+), 44 deletions(-) (limited to 'src') diff --git a/src/pc80/keyboard.c b/src/pc80/keyboard.c index 1b6aa4b837..c025c889fb 100644 --- a/src/pc80/keyboard.c +++ b/src/pc80/keyboard.c @@ -26,13 +26,47 @@ #include #include +#define KBD_DATA 0x60 +#define KBD_COMMAND 0x64 +#define KBD_STATUS 0x64 +#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec) +#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host) + +// Keyboard Controller Commands +#define KBC_CMD_READ_COMMAND 0x20 // Read command byte +#define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte +#define KBC_CMD_SELF_TEST 0xAA // Controller self-test + +/* The Keyboard controller command byte + * BIT | Description + * ----+------------------------------------------------------- + * 7 | reserved, must be zero + * 6 | XT Translation, (1 = on, 0 = off) + * 5 | Disable Mouse Port (1 = disable, 0 = enable) + * 4 | Disable Keyboard Port (1 = disable, 0 = enable) + * 3 | reserved, must be zero + * 2 | System Flag (1 = self-test passed. DO NOT SET TO ZERO) + * 1 | Mouse Port Interrupts (1 = enable, 0 = disable) + * 0 | Keyboard Port Interrupts (1 = enable, 0 = disable) + */ + +// Keyboard Controller Replies +#define KBC_REPLY_SELFTEST_OK 0x55 // controller self-test succeeded + +// +// Keyboard Replies +// +#define KBD_REPLY_POR 0xAA // Power on reset +#define KBD_REPLY_ACK 0xFA // Command ACK +#define KBD_REPLY_RESEND 0xFE // Command NACK, send command again + /* Wait 200ms for keyboard controller answers */ #define KBC_TIMEOUT_IN_MS 200 static int kbc_input_buffer_empty(void) { u32 timeout; - for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(0x64) & 0x02); timeout--) { + for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(KBD_STATUS) & KBD_IBF); timeout--) { mdelay(1); } @@ -46,7 +80,7 @@ static int kbc_input_buffer_empty(void) static int kbc_output_buffer_full(void) { u32 timeout; - for(timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(0x64) & 0x01) == 0); timeout--) { + for(timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(KBD_STATUS) & KBD_OBF) == 0); timeout--) { mdelay(1); } @@ -60,18 +94,50 @@ static int kbc_output_buffer_full(void) static int kbc_cleanup_buffers(void) { u32 timeout; - for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(0x64) & 0x03); timeout--) { + for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(KBD_STATUS) & (KBD_OBF | KBD_IBF)); timeout--) { mdelay(1); - inb(0x60); + inb(KBD_DATA); } if (!timeout) { printk_err("Couldn't cleanup the keyboard controller buffers\n"); - printk_err("0x64: 0x%x, 0x60: 0x%x\n", inb(0x64), inb(0x60)); + printk_err("Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n", + KBD_STATUS, inb(KBD_STATUS), KBD_DATA, inb(KBD_DATA)); } + return !!timeout; } +static int kbc_self_test(void) +{ + u8 self_test; + + /* Clean up any junk that might have been in the KBC. + * Both input and output buffers must be empty. + */ + if (!kbc_cleanup_buffers()) + return 0; + + /* reset/self test 8042 - send cmd 0xAA */ + outb(KBC_CMD_SELF_TEST, KBD_COMMAND); + + if (!kbc_output_buffer_full()) { + /* There probably is no keyboard controller. */ + printk_err("Could not reset keyboard controller.\n"); + return 0; + } + + /* read self-test result, 0x55 is returned in the output buffer */ + self_test = inb(KBD_DATA); + + if (self_test != 0x55) { + printk_err("Keyboard Controller self-test failed: 0x%x\n", + self_test); + return 0; + } + + return 1; +} static u8 send_keyboard(u8 command) { @@ -80,47 +146,33 @@ static u8 send_keyboard(u8 command) do { if (!kbc_input_buffer_empty()) return 0; - outb(command, 0x60); + outb(command, KBD_DATA); if (!kbc_output_buffer_full()) { printk_err("Could not send keyboard command %02x\n", command); return 0; } - regval = inb(0x60); + regval = inb(KBD_DATA); --resend; } while (regval == 0xFE && resend > 0); return regval; } - static void pc_keyboard_init(struct pc_keyboard *keyboard) { u8 regval; printk_debug("Keyboard init...\n"); - /* clean up any junk that might have been in the kbc */ - if (!kbc_cleanup_buffers()) return; - - /* reset/self test 8042 - send cmd 0xAA */ - if (!kbc_input_buffer_empty()) return; - outb(0xAA, 0x64); - if (!kbc_output_buffer_full()) { - printk_err("Could not reset keyboard controller.\n"); + /* Run a keyboard controller self-test */ + if (!kbc_self_test()) return; - } - - /* read self-test result, 0x55 is returned in the output buffer (0x60) */ - if ((regval = inb(0x60) != 0x55)) { - printk_err("Keyboard Controller self-test failed: 0x%x\n", regval); - return; - } /* Enable keyboard interface - No IRQ */ if (!kbc_input_buffer_empty()) return; - outb(0x60, 0x64); + outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) return; - outb(0x20, 0x60); /* send cmd: enable keyboard */ + outb(0x20, KBD_DATA); /* send cmd: enable keyboard */ if (!kbc_input_buffer_empty()) { printk_info("Timeout while enabling keyboard\n"); return; @@ -135,12 +187,13 @@ static void pc_keyboard_init(struct pc_keyboard *keyboard) printk_err("Keyboard selftest failed ACK: 0x%x\n", regval); return; } + if (!kbc_output_buffer_full()) { printk_err("Timeout waiting for keyboard after reset.\n"); return; } - - regval = inb(0x60); + + regval = inb(KBD_DATA); if (regval != 0xAA) { printk_err("Keyboard selftest failed: 0x%x\n", regval); return; @@ -180,10 +233,10 @@ static void pc_keyboard_init(struct pc_keyboard *keyboard) /* All is well - enable keyboard interface */ if (!kbc_input_buffer_empty()) return; - outb(0x60, 0x64); + outb(0x60, KBD_COMMAND); if (!kbc_input_buffer_empty()) return; - outb(0x61, 0x60); /* send cmd: enable keyboard and IRQ 1 */ - if (!kbc_input_buffer_empty()) { + outb(0x61, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */ + if (kbc_output_buffer_full()) { printk_err("Timeout during final keyboard enable\n"); return; } @@ -194,6 +247,8 @@ void init_pc_keyboard(unsigned port0, unsigned port1, struct pc_keyboard *kbd) { if ((port0 == 0x60) && (port1 == 0x64)) { pc_keyboard_init(kbd); + } else { + printk_warning("Unsupported keyboard controller.\n"); } } @@ -204,24 +259,16 @@ void init_pc_keyboard(unsigned port0, unsigned port1, struct pc_keyboard *kbd) */ void set_kbc_ps2_mode(void) { - /* clean up any junk that might have been in the kbc */ - if (!kbc_cleanup_buffers()) return; - - /* reset/self test 8042 before we can do anything */ - if (!kbc_input_buffer_empty()) return; - outb(0xAA, 0x64); - if (!kbc_output_buffer_full()) return; - - /* read self-test result, 0x55 is returned in the output buffer (0x60) */ - if ((inb(0x60) != 0x55)) { - printk_err("Keyboard Controller selftest failed\n"); + /* Run a keyboard controller self-test */ + if (!kbc_self_test()) return; - } /* Support PS/2 mode */ if (!kbc_input_buffer_empty()) return; - outb(0xcb, 0x64); + outb(0xcb, KBD_COMMAND); + if (!kbc_input_buffer_empty()) return; - outb(0x01, 0x60); + outb(0x01, KBD_DATA); + kbc_cleanup_buffers(); } -- cgit v1.2.3