From d988b612c76cb34f689c567e9e983e496f65008a Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Wed, 25 Sep 2013 14:05:31 -0700 Subject: bolt: Set GPIO29 as input in S0, output+high in S3/S5 This resolves WiFi issues after suspend/resume. It needs related SPI descriptor soft strap change to enable SLP_WLAN as a GPIO instead of owned by the ME. Change-Id: I03f4458d1e52a913770d391061baa6cfa41e8558 Signed-off-by: Duncan Laurie Reviewed-on: https://chromium-review.googlesource.com/170577 Reviewed-by: Aaron Durbin (cherry picked from commit cf1fe0524ad4793c8c422dc3fed3007b7fc96038) Signed-off-by: Isaac Christensen Reviewed-on: http://review.coreboot.org/6533 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich Reviewed-by: Edward O'Callaghan --- src/mainboard/google/bolt/gpio.h | 2 +- src/mainboard/google/bolt/smihandler.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/bolt/gpio.h b/src/mainboard/google/bolt/gpio.h index 4e7e8c4499..ff6069c7e1 100644 --- a/src/mainboard/google/bolt/gpio.h +++ b/src/mainboard/google/bolt/gpio.h @@ -52,7 +52,7 @@ const struct pch_lp_gpio_map mainboard_gpio_map[] = { LP_GPIO_UNUSED, /* 26: UNUSED */ LP_GPIO_UNUSED, /* 27: UNUSED */ LP_GPIO_UNUSED, /* 28: UNUSED */ - LP_GPIO_NATIVE, /* 29: NATIVE: WLAN_OFF_L */ + LP_GPIO_INPUT, /* 29: NATIVE: WLAN_OFF_L */ LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */ LP_GPIO_NATIVE, /* 31: NATIVE: ACOK_BUF */ LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */ diff --git a/src/mainboard/google/bolt/smihandler.c b/src/mainboard/google/bolt/smihandler.c index b3928524fd..54dcb73077 100644 --- a/src/mainboard/google/bolt/smihandler.c +++ b/src/mainboard/google/bolt/smihandler.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -87,6 +88,26 @@ void mainboard_smi_gpi(u32 gpi_sts) } } +static void bolt_wlan_off(void) +{ + u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + u32 gpio_conf; + + /* Make sure pin is owned by GPIO subsystem and not ACPI */ + gpio_conf = inl(gpio_base + GPIO_OWNER(0)); + gpio_conf |= GPIO_OWNER_GPIO << 29; + outl(gpio_conf, gpio_base + GPIO_OWNER(0)); + + /* Set GPIO29 config to only be reset on RSMRST */ + gpio_conf = inl(gpio_base + GPIO_RESET(0)); + gpio_conf |= GPIO_RESET_RSMRST << 29; + outl(gpio_conf, gpio_base + GPIO_RESET(0)); + + /* Set WLAN_OFF_L (GPIO29) as Output GPIO driven high */ + gpio_conf = GPIO_MODE_GPIO | GPIO_DIR_OUTPUT | GPO_LEVEL_HIGH; + outl(gpio_conf, gpio_base + GPIO_CONFIG0(29)); +} + void mainboard_smi_sleep(u8 slp_typ) { /* Disable USB charging if required */ @@ -109,6 +130,9 @@ void mainboard_smi_sleep(u8 slp_typ) break; } + /* Set WLAN_OFF GPIO state */ + bolt_wlan_off(); + /* Disable SCI and SMI events */ google_chromeec_set_smi_mask(0); google_chromeec_set_sci_mask(0); -- cgit v1.2.3