From c72ff11281233c097441e809a52b560b1a131196 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Tue, 19 Jun 2007 22:07:16 +0000 Subject: The GPIOs used for UART2 RX and TX were reversed. Signed-off-by: Marc Jones Acked-by: Ronald G. Minnich Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/cs5536/cs5536.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'src') diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index ef5064a8a8..9f4e90ed01 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -356,19 +356,19 @@ static void uarts_init(struct southbridge_amd_cs5536_config *sb) msr.lo |= sb->com2_irq << 28; wrmsr(MDD_IRQM_YHIGH, msr); - /* GPIO3 - UART2_RX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_3_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); + /* GPIO4 - UART2_RX */ + /* Set: Output Enable (0x4) */ + outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_3_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); + outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); - /* GPIO4 - UART2_TX */ - /* Set: Input Enable (0x20) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_INPUT_ENABLE); - /* Set: INAUX1 Select (0x34) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_IN_AUX1_SELECT); + /* GPIO3 - UART2_TX */ + /* Set: Input Enable (0x20) */ + outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE); + /* Set: INAUX1 Select (0x34) */ + outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT); - /* Set: GPIO 3 + 3 Pull Up (0x18) */ + /* Set: GPIO 3 and 4 Pull Up (0x18) */ outl(GPIOL_3_SET | GPIOL_4_SET, gpio_addr + GPIOL_PULLUP_ENABLE); -- cgit v1.2.3