From c54968d977a219c5910108a44c9526c64aba2bc5 Mon Sep 17 00:00:00 2001 From: Raul E Rangel Date: Wed, 26 May 2021 17:04:14 -0600 Subject: mb/google/guybrush: Enable RTD3 support for NVMe This will tell the kernel to ignore PCI ASPM when suspending the device and instead place the device into D3. We don't actually have a pin to control power to the NVMe so we leave it in D3Hot. I'm not sure if `PCI_RST#` is working correctly on S0i3 suspend/resume. If it's not acting as expected we can add the reset GPIO and have the OS do it. BUG=b:184617186 TEST=Run suspend_stress_test on guybrush for 10 cycles Signed-off-by: Raul E Rangel Change-Id: I29539ac120a9f1b7c1bfeaca745cfc82acfa461a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54967 Reviewed-by: Karthik Ramasubramanian Tested-by: build bot (Jenkins) --- src/mainboard/google/guybrush/Kconfig | 1 + src/mainboard/google/guybrush/variants/baseboard/devicetree.cb | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/guybrush/Kconfig b/src/mainboard/google/guybrush/Kconfig index 0e7d15e755..14ab695caf 100644 --- a/src/mainboard/google/guybrush/Kconfig +++ b/src/mainboard/google/guybrush/Kconfig @@ -16,6 +16,7 @@ config BOARD_SPECIFIC_OPTIONS select DRIVERS_GENERIC_GPIO_KEYS select DRIVERS_I2C_GENERIC select DRIVERS_I2C_HID + select DRIVERS_PCIE_RTD3_DEVICE select DRIVERS_UART_ACPI select DRIVERS_WIFI_GENERIC select EC_GOOGLE_CHROMEEC diff --git a/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb b/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb index 2c0c5d97c4..790c13c749 100644 --- a/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb @@ -193,7 +193,13 @@ chip soc/amd/cezanne end # WLAN device ref gpp_bridge_1 on end # SD device ref gpp_bridge_2 on end # WWAN - device ref gpp_bridge_3 on end # NVMe + device ref gpp_bridge_3 on + # Required so the NVMe gets placed into D3 when entering S0i3. + chip drivers/pcie/rtd3/device + register "name" = ""NVME"" + device pci 00.0 on end + end + end # NVMe device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A device ref gfx on end # Internal GPU (GFX) -- cgit v1.2.3