From c2ce370f30b60daf60e23182cf01eb898d35fbbd Mon Sep 17 00:00:00 2001 From: Idwer Vollering Date: Sun, 5 Jan 2020 01:44:25 +0100 Subject: src/mainboard: remove MMIO macros MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This touches several mainboards. Replace the macro with C functions. The presence of bootblock.c is assumed. Change-Id: I583034ef0b0ed3e5a5e3dd680c57728ec5efbc8f Signed-off-by: Idwer Vollering Reviewed-on: https://review.coreboot.org/c/coreboot/+/37738 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki --- src/mainboard/amd/thatcher/romstage.c | 3 ++- src/mainboard/asrock/imb-a180/bootblock.c | 17 +++++++---------- src/mainboard/asus/am1i-a/bootblock.c | 8 +++----- src/mainboard/asus/f2a85-m/bootblock.c | 12 +++++------- src/mainboard/biostar/a68n_5200/romstage.c | 12 +++++------- src/mainboard/biostar/am1ml/bootblock.c | 17 +++++++---------- src/mainboard/hp/abm/romstage.c | 20 +++++++++----------- src/mainboard/msi/ms7721/bootblock.c | 12 +++++------- 8 files changed, 43 insertions(+), 58 deletions(-) (limited to 'src') diff --git a/src/mainboard/amd/thatcher/romstage.c b/src/mainboard/amd/thatcher/romstage.c index 5678021f8b..0a2821ba60 100644 --- a/src/mainboard/amd/thatcher/romstage.c +++ b/src/mainboard/amd/thatcher/romstage.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -50,5 +51,5 @@ void board_BeforeAgesa(struct sysinfo *cb) outb(0x1, 0xcd7); outb(0xea, 0xcd6); outb(0x1, 0xcd7); - *(u8 *)0xfed80101 = 0x98; + gpio_100_write8(0x1, 0x98); } diff --git a/src/mainboard/asrock/imb-a180/bootblock.c b/src/mainboard/asrock/imb-a180/bootblock.c index f6bd5c40de..eb5641ff5e 100644 --- a/src/mainboard/asrock/imb-a180/bootblock.c +++ b/src/mainboard/asrock/imb-a180/bootblock.c @@ -21,23 +21,20 @@ void bootblock_mainboard_early_init(void) { - volatile u32 *addr32; - u32 t32; + u32 reg32; /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ - addr32 = (u32 *)0xfed80e28; - t32 = *addr32; - t32 &= 0xfff8ffff; - *addr32 = t32; + reg32 = misc_read32(0x28); + reg32 &= 0xfff8ffff; + misc_write32(0x28, reg32); /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - addr32 = (u32 *)0xfed80e40; - t32 = *addr32; - t32 &= 0xffffbffb; - *addr32 = t32; + reg32 = misc_read32(0x40); + reg32 &= 0xffffbffb; + misc_write32(0x40, reg32); /* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); diff --git a/src/mainboard/asus/am1i-a/bootblock.c b/src/mainboard/asus/am1i-a/bootblock.c index d4017cf282..ddbf2aa548 100644 --- a/src/mainboard/asus/am1i-a/bootblock.c +++ b/src/mainboard/asus/am1i-a/bootblock.c @@ -113,18 +113,16 @@ static void ite_gpio_conf(pnp_devfn_t dev) void bootblock_mainboard_early_init(void) { - volatile u32 i, val, *addr32; + volatile u32 i, val; /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); /* Configure ClkDrvStr1 settings */ - addr32 = (u32 *)0xfed80e24; - *addr32 = 0x030800aa; + misc_write32(0x24, 0x030800aa); /* Configure MiscClkCntl1 settings */ - addr32 = (u32 *)0xfed80e40; - *addr32 = 0x000c4050; + misc_write32(0x40, 0x000c4050); /* Configure SIO as made under vendor BIOS */ ite_gpio_conf(GPIO_DEV); diff --git a/src/mainboard/asus/f2a85-m/bootblock.c b/src/mainboard/asus/f2a85-m/bootblock.c index 648f55a559..0472877dc0 100644 --- a/src/mainboard/asus/f2a85-m/bootblock.c +++ b/src/mainboard/asus/f2a85-m/bootblock.c @@ -16,27 +16,25 @@ #include #include -#include +#include #include #include #include #include #include -#define SB_MMIO_MISC32(x) *(volatile u32 *)(AMD_SB_ACPI_MMIO_ADDR + 0xE00 + (x)) - static void sbxxx_enable_48mhzout(void) { /* most likely programming to 48MHz out signal */ u32 reg32; - reg32 = SB_MMIO_MISC32(0x28); + reg32 = misc_read32(0x28); reg32 &= 0xffc7ffff; reg32 |= 0x00100000; - SB_MMIO_MISC32(0x28) = reg32; + misc_write32(0x28, reg32); - reg32 = SB_MMIO_MISC32(0x40); + reg32 = misc_read32(0x40); reg32 &= ~0x80u; - SB_MMIO_MISC32(0x40) = reg32; + misc_write32(0x40, reg32); } static void superio_init_m(void) diff --git a/src/mainboard/biostar/a68n_5200/romstage.c b/src/mainboard/biostar/a68n_5200/romstage.c index 5d210fa4be..09098f7d8b 100644 --- a/src/mainboard/biostar/a68n_5200/romstage.c +++ b/src/mainboard/biostar/a68n_5200/romstage.c @@ -21,12 +21,10 @@ #include #include #include +#include #include #include -#define SB_MMIO 0xFED80000 -#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) - #define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) #define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) #define CLKIN_DEV PNP_DEV(0x2e, IT8728F_GPIO) @@ -36,14 +34,14 @@ static void sbxxx_enable_48mhzout(void) /* most likely programming to 48MHz out signal */ /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ u32 reg32; - reg32 = SB_MMIO_MISC32(0x28); + reg32 = misc_read32(0x28); reg32 &= 0xfff8ffff; - SB_MMIO_MISC32(0x28) = reg32; + misc_write32(0x28, reg32); /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - reg32 = SB_MMIO_MISC32(0x40); + reg32 = misc_read32(0x40); reg32 &= 0xffffbffb; - SB_MMIO_MISC32(0x40) = reg32; + misc_write32(0x40, reg32); } void board_BeforeAgesa(struct sysinfo *cb) diff --git a/src/mainboard/biostar/am1ml/bootblock.c b/src/mainboard/biostar/am1ml/bootblock.c index f198fe6809..771745e9bd 100644 --- a/src/mainboard/biostar/am1ml/bootblock.c +++ b/src/mainboard/biostar/am1ml/bootblock.c @@ -61,23 +61,20 @@ static void ite_gpio_conf(pnp_devfn_t dev) void bootblock_mainboard_early_init(void) { - volatile u32 *addr32; - u32 t32; + u32 reg32; /* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */ pm_write8(0xea, 0x1); /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ - addr32 = (u32 *)0xfed80e28; - t32 = *addr32; - t32 &= 0xfff8ffff; - *addr32 = t32; + reg32 = misc_read32(0x28); + reg32 &= 0xfff8ffff; + misc_write32(0x28, reg32); /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - addr32 = (u32 *)0xfed80e40; - t32 = *addr32; - t32 &= 0xffffbffb; - *addr32 = t32; + reg32 = misc_read32(0x40); + reg32 &= 0xffffbffb; + misc_write32(0x49, reg32); /* Configure SIO as made under vendor BIOS */ ite_evc_conf(ENVC_DEV); diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c index d7322c9eee..079bd7b786 100644 --- a/src/mainboard/hp/abm/romstage.c +++ b/src/mainboard/hp/abm/romstage.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -25,8 +26,7 @@ void board_BeforeAgesa(struct sysinfo *cb) { - u32 *addr32; - u32 t32; + u32 reg32; /* For serial port option, plug-in card on LPC. */ pci_devfn_t dev = PCI_DEV(0, 0x14, 3); @@ -47,17 +47,15 @@ void board_BeforeAgesa(struct sysinfo *cb) /* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */ /* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */ - addr32 = (u32 *)0xfed80e28; - t32 = *addr32; - t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16] - t32 |= 0x00010000; // Set bit 16 for 25MHz - *addr32 = t32; + reg32 = misc_read32(0x28); + reg32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16] + reg32 |= 0x00010000; // Set bit 16 for 25MHz + misc_write32(0x28, reg32); /* Enable Auxiliary OSCOUT1/OSCOUT2 */ - addr32 = (u32 *)0xfed80e40; - t32 = *addr32; - t32 &= 0xffffff7b; // clear 2, 7 - *addr32 = t32; + reg32 = misc_read32(0x40; + reg32 &= 0xffffff7b; // clear 2, 7 + misc_write32(0x40, reg32); nct5104d_enable_uartd(SERIAL_DEV); nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); diff --git a/src/mainboard/msi/ms7721/bootblock.c b/src/mainboard/msi/ms7721/bootblock.c index 9ee7a37d00..7274bc3317 100644 --- a/src/mainboard/msi/ms7721/bootblock.c +++ b/src/mainboard/msi/ms7721/bootblock.c @@ -19,12 +19,10 @@ #include #include #include -#include +#include #include #include -#define SB_MMIO_MISC32(x) *(volatile u32 *)(AMD_SB_ACPI_MMIO_ADDR + 0xE00 + (x)) - /* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */ #define SUPERIO_ADDRESS 0x4e @@ -76,14 +74,14 @@ static void sbxxx_enable_48mhzout(void) { /* most likely programming to 48MHz out signal */ u32 reg32; - reg32 = SB_MMIO_MISC32(0x28); + reg32 = misc_read32(0x28); reg32 &= 0xffc7ffff; reg32 |= 0x00100000; - SB_MMIO_MISC32(0x28) = reg32; + misc_write32(0x28, reg32); - reg32 = SB_MMIO_MISC32(0x40); + reg32 = misc_read32(0x40); reg32 &= ~0x80u; - SB_MMIO_MISC32(0x40) = reg32; + misc_write32(0x40, reg32); } void bootblock_mainboard_early_init(void) -- cgit v1.2.3