From baa8c7819cdaa21feb04f3144e3914bcaa99bf9b Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Tue, 15 Oct 2019 14:52:29 +0200 Subject: mb/supermicro/x11ssh-tf: Disable i8042 support Even though the vendor firmware enables the i8042 I/O port, it doesn't feed valid data to those, but instead uses USB HID devices. Disable the KBC port in SuperI/O and report no KCS port using FADT. Fixes: * Fixes error message in Linux that i8042 keyboard couldn't be enabled. Tested on Supermicro X11SSH-TF: The virtual remote managment console still works. Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d Signed-off-by: Patrick Rudolph Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Nico Huber --- src/mainboard/supermicro/x11-lga1151-series/Kconfig | 1 + .../x11-lga1151-series/variants/x11ssh-tf/overridetree.cb | 7 +------ 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'src') diff --git a/src/mainboard/supermicro/x11-lga1151-series/Kconfig b/src/mainboard/supermicro/x11-lga1151-series/Kconfig index a3ed8af972..ea0214ad01 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/Kconfig +++ b/src/mainboard/supermicro/x11-lga1151-series/Kconfig @@ -14,6 +14,7 @@ config BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES select IPMI_KCS select MAINBOARD_NO_FSP_GOP select SUPERIO_ASPEED_HAS_UART_DELAY_WORKAROUND + select NO_FADT_8042 if BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb index 3e587dc817..aace4f7487 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb @@ -114,12 +114,7 @@ chip soc/intel/skylake io 0x66 = 0xa30 irq 0x70 = 0xb end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 0xc - end + device pnp 2e.5 off end # KBC device pnp 2e.7 on end # GPIO device pnp 2e.b on # SUART3 io 0x60 = 0x3e8 -- cgit v1.2.3