From b7f27abb3bc4ef83e4250c9ac3480ca5fd7ec7cb Mon Sep 17 00:00:00 2001 From: Kane Chen Date: Thu, 16 May 2019 18:52:36 +0800 Subject: mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INT Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting. BUG=b:131742713 TEST=headset is working Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845 Tested-by: build bot (Jenkins) Reviewed-by: Ben Kao Reviewed-by: Furquan Shaikh Reviewed-by: Paul Fagerburg Reviewed-by: Tim Wawrzynczak --- src/mainboard/google/hatch/variants/kohaku/overridetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src') diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 9546420e35..69875bdde2 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -90,7 +90,7 @@ chip soc/intel/cannonlake chip drivers/i2c/da7219 # TODO: these settings were copied from another board # with the same chip. verify the settings - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H0_IRQ)" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" register "btn_cfg" = "50" register "mic_det_thr" = "500" register "jack_ins_deb" = "20" -- cgit v1.2.3