From b207f3f3708ac9d60841886814448a475fbdc39a Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Tue, 26 Oct 2021 18:19:24 +0200 Subject: mb/prodrive/hermes: Number Ethernet devices The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210 Ethernet NIC, but their numbering isn't consistent with the PCIe root port function numbers. With only a M.2 SSD plugged in, Linux uses the following names: PHY 0 ---> enp6s0 PHY 1 ---> enp4s0 PHY 2 ---> enp3s0 PHY 3 ---> enp1s0 PHY 4 ---> enp2s0 These names change after adding or removing PCIe devices in slots connected to root ports that get enumerated before the NICs' root ports, because the assignment of secondary bus numbers depends on the enumeration order. Because of this, the "predictable" network interface names are not at all predictable, which is awful. To avoid this, describe the NICs using SMBIOS Type41 entries with the correct instance numbers. With this patch, Linux uses these names: PHY 0 ---> eno0 PHY 1 ---> eno1 PHY 2 ---> eno2 PHY 3 ---> eno3 PHY 4 ---> eno4 No matter what PCIe devices are present, these names don't change. Change-Id: I7a527298f84172f9135006083ad7e748dcc27911 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628 Reviewed-by: Arthur Heymans Tested-by: build bot (Jenkins) --- src/mainboard/prodrive/hermes/Kconfig | 1 + src/mainboard/prodrive/hermes/devicetree.cb | 15 +++++++++++++++ 2 files changed, 16 insertions(+) (limited to 'src') diff --git a/src/mainboard/prodrive/hermes/Kconfig b/src/mainboard/prodrive/hermes/Kconfig index 2fecc06f6d..af07ee10c8 100644 --- a/src/mainboard/prodrive/hermes/Kconfig +++ b/src/mainboard/prodrive/hermes/Kconfig @@ -14,6 +14,7 @@ config BOARD_PRODRIVE_HERMES_BASEBOARD select INTEL_GMA_HAVE_VBT select SOC_INTEL_COMMON_BLOCK_HDA_VERB select ONBOARD_VGA_IS_PRIMARY + select SMBIOS_TYPE41_PROVIDED_BY_DEVTREE select HAVE_ACPI_RESUME if !HERMES_USES_SPS_FIRMWARE select DISABLE_ACPI_HIBERNATE if HERMES_USES_SPS_FIRMWARE diff --git a/src/mainboard/prodrive/hermes/devicetree.cb b/src/mainboard/prodrive/hermes/devicetree.cb index 8faf016e7c..e0655c5630 100644 --- a/src/mainboard/prodrive/hermes/devicetree.cb +++ b/src/mainboard/prodrive/hermes/devicetree.cb @@ -199,18 +199,30 @@ chip soc/intel/cannonlake device pci 1c.4 on # PCIe root port 5 (PHY 3) register "PcieRpEnable[4]" = "1" register "PcieRpLtrEnable[4]" = "1" + device pci 00.0 on + smbios_dev_info 3 + end end device pci 1c.5 on # PCIe root port 6 (PHY 4) register "PcieRpEnable[5]" = "1" register "PcieRpLtrEnable[5]" = "1" + device pci 00.0 on + smbios_dev_info 4 + end end device pci 1c.6 on # PCIe root port 7 (PHY 2) register "PcieRpEnable[6]" = "1" register "PcieRpLtrEnable[6]" = "1" + device pci 00.0 on + smbios_dev_info 2 + end end device pci 1c.7 on # PCIe root port 8 (PHY 1) register "PcieRpEnable[7]" = "1" register "PcieRpLtrEnable[7]" = "1" + device pci 00.0 on + smbios_dev_info 1 + end end device pci 1d.0 on # PCIe root port 9 (M2 M) smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "M2 M" "SlotDataBusWidth4X" @@ -221,6 +233,9 @@ chip soc/intel/cannonlake device pci 1d.5 on # PCIe root port 14 (PHY 0) register "PcieRpEnable[13]" = "1" register "PcieRpLtrEnable[13]" = "1" + device pci 00.0 on + smbios_dev_info 0 + end end device pci 1d.6 on # PCIe root port 15 (BMC) device pci 00.0 on # Aspeed PCI Bridge -- cgit v1.2.3