From 8ada1526df06cb50a82305e840a5181a3c65575f Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 16 Nov 2012 13:34:48 -0800 Subject: Unify use of bool config variables e.g. -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS This will make it easier to switch over to use the config_enabled() macro later on. Change-Id: I0bcf223669318a7b1105534087c7675a74c1dd8a Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/1874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/arch/x86/lib/c_start.S | 4 ++-- src/cpu/amd/agesa/family15tn/model_15_init.c | 6 +++--- src/devices/pci_device.c | 2 +- src/include/cpu/x86/lapic.h | 2 +- src/mainboard/amd/parmer/agesawrapper.c | 2 +- src/mainboard/amd/parmer/get_bus_conf.c | 4 ++-- src/mainboard/amd/parmer/mainboard.c | 2 +- src/mainboard/amd/parmer/romstage.c | 2 +- src/mainboard/amd/thatcher/agesawrapper.c | 2 +- src/mainboard/amd/thatcher/get_bus_conf.c | 4 ++-- src/mainboard/amd/thatcher/mainboard.c | 2 +- src/mainboard/amd/thatcher/romstage.c | 2 +- src/mainboard/asus/m4a785-m/romstage.c | 2 +- src/mainboard/siemens/sitemp_g1p1/acpi_tables.c | 4 ---- src/mainboard/tyan/s8226/buildOpts.c | 6 +++--- src/mainboard/tyan/s8226/rd890_cfg.h | 4 ++-- src/southbridge/amd/agesa/hudson/early_setup.c | 4 ++-- src/southbridge/amd/agesa/hudson/hudson.c | 2 +- src/southbridge/amd/cs5530/vga.c | 2 +- src/southbridge/amd/rs780/early_setup.c | 14 +++++++------- src/southbridge/amd/sr5650/early_setup.c | 4 ++-- 21 files changed, 36 insertions(+), 40 deletions(-) (limited to 'src') diff --git a/src/arch/x86/lib/c_start.S b/src/arch/x86/lib/c_start.S index 9c1fdb106f..a84724d7b9 100644 --- a/src/arch/x86/lib/c_start.S +++ b/src/arch/x86/lib/c_start.S @@ -82,7 +82,7 @@ _start: /* Restore the stack location */ movl %ebp, %esp -#if CONFIG_GDB_WAIT == 1 +#if CONFIG_GDB_WAIT call gdb_stub_breakpoint #endif /* The boot_complete flag has already been pushed */ @@ -235,7 +235,7 @@ int_hand: iret -#if CONFIG_GDB_WAIT == 1 +#if CONFIG_GDB_WAIT .globl gdb_stub_breakpoint gdb_stub_breakpoint: diff --git a/src/cpu/amd/agesa/family15tn/model_15_init.c b/src/cpu/amd/agesa/family15tn/model_15_init.c index 02580eeb86..39533bb3d6 100644 --- a/src/cpu/amd/agesa/family15tn/model_15_init.c +++ b/src/cpu/amd/agesa/family15tn/model_15_init.c @@ -62,7 +62,7 @@ static void model_15_init(device_t dev) u8 i; msr_t msr; int msrno; -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS u32 siblings; #endif @@ -90,7 +90,7 @@ static void model_15_init(device_t dev) msr.lo |= SYSCFG_MSR_MtrrFixDramEn; wrmsr(SYSCFG_MSR, msr); -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type == 3) restore_mtrr(); #endif @@ -109,7 +109,7 @@ static void model_15_init(device_t dev) /* Enable the local cpu apics */ setup_lapic(); -#if CONFIG_LOGICAL_CPUS == 1 +#if CONFIG_LOGICAL_CPUS siblings = cpuid_ecx(0x80000008) & 0xff; if (siblings > 0) { diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c index 94f68ea1ab..e2a49402c9 100644 --- a/src/devices/pci_device.c +++ b/src/devices/pci_device.c @@ -663,7 +663,7 @@ int oprom_is_loaded = 0; /** Default handler: only runs the relevant PCI BIOS. */ void pci_dev_init(struct device *dev) { -#if CONFIG_PCI_ROM_RUN == 1 || CONFIG_VGA_ROM_RUN == 1 +#if CONFIG_PCI_ROM_RUN || CONFIG_VGA_ROM_RUN struct rom_header *rom, *ram; if (CONFIG_PCI_ROM_RUN != 1 && /* Only execute VGA ROMs. */ diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h index 078f2a7c62..54b2f5488f 100644 --- a/src/include/cpu/x86/lapic.h +++ b/src/include/cpu/x86/lapic.h @@ -52,7 +52,7 @@ static inline __attribute__((always_inline)) unsigned long lapicid(void) } #ifndef __ROMCC__ -#if CONFIG_AP_IN_SIPI_WAIT != 1 +#if !CONFIG_AP_IN_SIPI_WAIT /* If we need to go back to sipi wait, we use the long non-inlined version of * this function in lapic_cpu_init.c */ diff --git a/src/mainboard/amd/parmer/agesawrapper.c b/src/mainboard/amd/parmer/agesawrapper.c index b82c1c137f..c180800143 100644 --- a/src/mainboard/amd/parmer/agesawrapper.c +++ b/src/mainboard/amd/parmer/agesawrapper.c @@ -479,7 +479,7 @@ agesawrapper_amdlaterunaptask ( return (UINT32)Status; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME UINT32 agesawrapper_amdinitresume(VOID) { diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c index ad5e1d7696..2636b9e49a 100644 --- a/src/mainboard/amd/parmer/get_bus_conf.c +++ b/src/mainboard/amd/parmer/get_bus_conf.c @@ -47,7 +47,7 @@ u32 sbdn_sb800; static u32 get_bus_conf_done = 0; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME extern u8 acpi_slp_type; #endif void get_bus_conf(void) @@ -78,7 +78,7 @@ void get_bus_conf(void) * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type != 3) { status = agesawrapper_amdinitlate(); if(status) { diff --git a/src/mainboard/amd/parmer/mainboard.c b/src/mainboard/amd/parmer/mainboard.c index 40ad8c5d91..a83cd427f0 100644 --- a/src/mainboard/amd/parmer/mainboard.c +++ b/src/mainboard/amd/parmer/mainboard.c @@ -39,7 +39,7 @@ static void parmer_enable(device_t dev) * The mainboard is the first place that we get control in ramstage. Check * for S3 resume and call the approriate AGESA/CIMx resume functions. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME acpi_slp_type = acpi_get_sleep_type(); if (acpi_slp_type == 3) agesawrapper_fchs3earlyrestore(); diff --git a/src/mainboard/amd/parmer/romstage.c b/src/mainboard/amd/parmer/romstage.c index 56fcb574ff..335e56d566 100644 --- a/src/mainboard/amd/parmer/romstage.c +++ b/src/mainboard/amd/parmer/romstage.c @@ -44,7 +44,7 @@ void disable_cache_as_ram(void); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { u32 val; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void *resume_backup_memory; #endif val = agesawrapper_amdinitmmio(); diff --git a/src/mainboard/amd/thatcher/agesawrapper.c b/src/mainboard/amd/thatcher/agesawrapper.c index 509f472974..67ac8e9e53 100644 --- a/src/mainboard/amd/thatcher/agesawrapper.c +++ b/src/mainboard/amd/thatcher/agesawrapper.c @@ -479,7 +479,7 @@ agesawrapper_amdlaterunaptask ( return (UINT32)Status; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME UINT32 agesawrapper_amdinitresume(VOID) { diff --git a/src/mainboard/amd/thatcher/get_bus_conf.c b/src/mainboard/amd/thatcher/get_bus_conf.c index ad5e1d7696..2636b9e49a 100644 --- a/src/mainboard/amd/thatcher/get_bus_conf.c +++ b/src/mainboard/amd/thatcher/get_bus_conf.c @@ -47,7 +47,7 @@ u32 sbdn_sb800; static u32 get_bus_conf_done = 0; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME extern u8 acpi_slp_type; #endif void get_bus_conf(void) @@ -78,7 +78,7 @@ void get_bus_conf(void) * of each of the write functions called prior to the ACPI write functions, so this * becomes the best place for this call. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME if (acpi_slp_type != 3) { status = agesawrapper_amdinitlate(); if(status) { diff --git a/src/mainboard/amd/thatcher/mainboard.c b/src/mainboard/amd/thatcher/mainboard.c index 8d4eae2ef1..bc1d591f02 100644 --- a/src/mainboard/amd/thatcher/mainboard.c +++ b/src/mainboard/amd/thatcher/mainboard.c @@ -55,7 +55,7 @@ static void thatcher_enable(device_t dev) * The mainboard is the first place that we get control in ramstage. Check * for S3 resume and call the approriate AGESA/CIMx resume functions. */ -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME acpi_slp_type = acpi_get_sleep_type(); if (acpi_slp_type == 3) agesawrapper_fchs3earlyrestore(); diff --git a/src/mainboard/amd/thatcher/romstage.c b/src/mainboard/amd/thatcher/romstage.c index e0cfd02d15..445fe45e72 100644 --- a/src/mainboard/amd/thatcher/romstage.c +++ b/src/mainboard/amd/thatcher/romstage.c @@ -49,7 +49,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) u32 val; u8 byte; device_t dev; -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME void *resume_backup_memory; #endif val = agesawrapper_amdinitmmio(); diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c index f0be2f7793..1fe7b49512 100644 --- a/src/mainboard/asus/m4a785-m/romstage.c +++ b/src/mainboard/asus/m4a785-m/romstage.c @@ -246,7 +246,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) { -#ifndef CONFIG_BOARD_ASUS_M4A785TM +#if !CONFIG_BOARD_ASUS_M4A785TM static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; /* If the BUID was adjusted in early_ht we need to do the manual override */ if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c index ea69034802..cf17e76442 100644 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c @@ -36,10 +36,6 @@ #define DUMP_ACPI_TABLES 0 -#ifndef CONFIG_LINT01_CONVERSION -#define CONFIG_LINT01_CONVERSION 1 -#endif - extern u16 pm_base; /* diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c index 0f618ecaa1..63c587acb6 100644 --- a/src/mainboard/tyan/s8226/buildOpts.c +++ b/src/mainboard/tyan/s8226/buildOpts.c @@ -202,7 +202,7 @@ CONST MANUAL_BUID_SWAP_LIST ROMDATA s8226_manual_swaplist[2] = } }; -#if CONFIG_HT3_SUPPORT == 1 +#if CONFIG_HT3_SUPPORT /** * The socket and link match values are platform specific * @@ -439,10 +439,10 @@ CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] = #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE /* -#if (CONFIG_CPU_AMD_AGESA_FAMILY15 == 1) +#if CONFIG_CPU_AMD_AGESA_FAMILY15 #define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE #endif -#if (CONFIG_CPU_AMD_AGESA_FAMILY10 == 1) +#if CONFIG_CPU_AMD_AGESA_FAMILY10 #define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE #endif */ diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h index 8f45019783..3ba25d5006 100644 --- a/src/mainboard/tyan/s8226/rd890_cfg.h +++ b/src/mainboard/tyan/s8226/rd890_cfg.h @@ -31,10 +31,10 @@ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. */ #ifndef DEFAULT_HT_PATH -#if CONFIG_CPU_AMD_AGESA_FAMILY10 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY10 #define DEFAULT_HT_PATH {0x0, 0x3} #endif -#if CONFIG_CPU_AMD_AGESA_FAMILY15 == 1 +#if CONFIG_CPU_AMD_AGESA_FAMILY15 #define DEFAULT_HT_PATH {0x0, 0x1} #endif #endif diff --git a/src/southbridge/amd/agesa/hudson/early_setup.c b/src/southbridge/amd/agesa/hudson/early_setup.c index 8cf380bdf6..ed52108364 100644 --- a/src/southbridge/amd/agesa/hudson/early_setup.c +++ b/src/southbridge/amd/agesa/hudson/early_setup.c @@ -79,7 +79,7 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) return nvram_pos; } -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_get_sleep_type(void) { u16 tmp = inw(PM1_CNT_BLK_ADDRESS); @@ -89,7 +89,7 @@ int acpi_get_sleep_type(void) } #endif -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_is_wakeup_early(void) { return (acpi_get_sleep_type() == 3); diff --git a/src/southbridge/amd/agesa/hudson/hudson.c b/src/southbridge/amd/agesa/hudson/hudson.c index ce450429fa..ce541fc0b5 100644 --- a/src/southbridge/amd/agesa/hudson/hudson.c +++ b/src/southbridge/amd/agesa/hudson/hudson.c @@ -30,7 +30,7 @@ #include "hudson.h" #include "smbus.h" -#if CONFIG_HAVE_ACPI_RESUME == 1 +#if CONFIG_HAVE_ACPI_RESUME int acpi_get_sleep_type(void) { u16 tmp = inw(PM1_CNT_BLK_ADDRESS); diff --git a/src/southbridge/amd/cs5530/vga.c b/src/southbridge/amd/cs5530/vga.c index 56bea45ad5..66ab239efc 100644 --- a/src/southbridge/amd/cs5530/vga.c +++ b/src/southbridge/amd/cs5530/vga.c @@ -492,4 +492,4 @@ static const struct pci_driver vga_pci_driver __pci_driver = { .device = PCI_DEVICE_ID_CYRIX_5530_VIDEO, }; -#endif /* #if CONFIG_GX1_VIDEO == 1 */ +#endif /* #if CONFIG_GX1_VIDEO */ diff --git a/src/southbridge/amd/rs780/early_setup.c b/src/southbridge/amd/rs780/early_setup.c index 0540823f16..31b31736cd 100644 --- a/src/southbridge/amd/rs780/early_setup.c +++ b/src/southbridge/amd/rs780/early_setup.c @@ -147,7 +147,7 @@ static u8 is_famly10(void) return (cpuid_eax(1) & 0xff00000) != 0; } -#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */ +#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static u8 l3_cache(void) { return (cpuid_edx(0x80000006) & (0x3FFF << 18)) != 0; @@ -246,7 +246,7 @@ static void rs780_htinit(void) } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) { printk(BIOS_INFO, "rs780_htinit: HT3 mode\n"); - #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */ + #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 /* HT3 mode, RPR 8.4.3 */ set_nbcfg_enable_bits(rs780_f0, 0x9c, 0x3 << 16, 0); @@ -282,11 +282,11 @@ static void rs780_htinit(void) /* Sets Training 0 Time. See T0Time table for encodings */ set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20); /* TODO: */ - #endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */ + #endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ } } -#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1 /* save some spaces */ +#if !CONFIG_NORTHBRIDGE_AMD_AMDFAM10 /******************************************************* * Optimize k8 with UMA. * See BKDG_NPT_0F guide for details. @@ -340,9 +340,9 @@ static void k8_optimization(void) } #else #define k8_optimization() do{}while(0) -#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1 */ +#endif /* !CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ -#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */ +#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 static void fam10_optimization(void) { device_t cpu_f0, cpu_f2, cpu_f3; @@ -405,7 +405,7 @@ static void fam10_optimization(void) } #else #define fam10_optimization() do{}while(0) -#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */ +#endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 */ /***************************************** * rs780_por_pcicfg_init() diff --git a/src/southbridge/amd/sr5650/early_setup.c b/src/southbridge/amd/sr5650/early_setup.c index 0f54ba356c..c6131638ad 100644 --- a/src/southbridge/amd/sr5650/early_setup.c +++ b/src/southbridge/amd/sr5650/early_setup.c @@ -266,7 +266,7 @@ void sr5650_htinit(void) //set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x26); /* HT Buffer Allocation for Ganged Links!!! */ -#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */ +#endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 */ } } @@ -299,7 +299,7 @@ void fam10_optimization(void) } #else #define fam10_optimization() do{}while(0) -#endif /* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */ +#endif /* CONFIG_NORTHBRIDGE_AMD_AMDFAM10 || CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 */ /***************************************** * Compliant with CIM_33's ATINB_PCICFG_POR_TABLE -- cgit v1.2.3